• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.6
• /
• pp.185-196
• /
• 2015

Energy aware server clusters aim to reduce power consumption at maximum while keeping QoS(Quality of Service) compared to energy non-aware server clusters. They adjust the power mode of each server in a fixed or variable time interval to let only the minimum number of servers needed to handle current user requests ON. Previous studies on energy aware server cluster put efforts to reduce power consumption further or to keep QoS, but they do not consider energy efficiency well. In this paper, we propose an energy efficient cluster management based on autonomous learning for energy aware server clusters. Using parameters optimized through autonomous learning, our method adjusts server power mode to achieve maximum performance with respect to power consumption. Our method repeats the following procedure for adjusting the power modes of servers. Firstly, according to the current load and traffic pattern, it classifies current workload pattern type in a predetermined way. Secondly, it searches learning table to check whether learning has been performed for the classified workload pattern type in the past. If yes, it uses the already-stored parameters. Otherwise, it performs learning for the classified workload pattern type to find the best parameters in terms of energy efficiency and stores the optimized parameters. Thirdly, it adjusts server power mode with the parameters. We implemented the proposed method and performed experiments with a cluster of 16 servers using three different kinds of load patterns. Experimental results show that the proposed method is better than the existing methods in terms of energy efficiency: the numbers of good response per unit power consumed in the proposed method are 99.8%, 107.5% and 141.8% of those in the existing static method, 102.0%, 107.0% and 106.8% of those in the existing prediction method for banking load pattern, real load pattern, and virtual load pattern, respectively.

• Cartoon and Animation Studies
• /
• s.33
• /
• pp.31-53
• /
• 2013

In the early twentieth century, history of animation began by modern artists, they produced various experimental images with the newly invented film and cameras. Artists in the field of movie, photography, paintings and others manipulated images in motion. But as some animated movies won industrial success and popularity, they became the trend but experimental style of early animation preserved by so-called non-mainstreamers or experimental animators, counteracting commercialism. Disney animation also followed the trend by applying realistic Hollywood film style, the worse critics placed a low value on the animation and it tarnished the image, although it was profitable investment from a business standpoint. To make images realistic, they opened a drawing class that animators developed skills to imitate motions and forms from subjects in real life. Also some techniques and gizmos were used to mimic and simulate three dimensional objects and spaces, multiplane camera and compositing 3D CG images with 2D drawings. Moreover, they brought animation stories from fairly tales or folk tales, and Walt's personal interest in live-action movies, they applied Hollywood-film-like narratives and realistic visual, and harsh criticism ensued. On the surface early disney animations' potential seems to be weakened, but in reality it still exists by simplifying and exaggerating forms and color as modern arts. Disney animation employs concepts of the modernism paintings such as simplified shapes and colors to a character design, when their characters are placed together in a scene, that visual elements cause mental reaction. This modification gives a new internal experience to audiences. As conceptual colors in abstract paintings make images appeared to be flat, coloring characters with no shading make them look flat and comparing to them, background images are also appeared to be flat. On top of that, multi-perspective at background images recalls modernist paintings. This essay goes in details with the animation pioneers' works and how Disney animation developed its techniques to emulate real life and analyses color schemes, forms, and spaces in Disney animation compared with modern artists' works, in that the visual language of Disney animation reminds of impression from abstract paintings in the beginning of the twentieth centuries.

• KIPS Transactions on Computer and Communication Systems
• /
• v.9 no.11
• /
• pp.281-290
• /
• 2020

With the spread of smartphones, services that want to use personalized data are increasing. In particular, healthcare-related services deal with a variety of data, and data visualization techniques are used to effectively show this. As data visualization techniques are used, interactions in visualization are also naturally emphasized. In the PC environment, since the interaction for data visualization is performed with a mouse, various filtering for data is provided. On the other hand, in the case of interaction in a mobile environment, the screen size is small and it is difficult to recognize whether or not the interaction is possible, so that only limited visualization provided by the app can be provided through a button touch method. In order to overcome the limitation of interaction in such a mobile environment, we intend to enable data visualization interactions through conversations with chatbots so that users can check individual data through various visualizations. To do this, it is necessary to convert the user's query into a query and retrieve the result data through the converted query in the database that is storing data periodically. There are many studies currently being done to convert natural language into queries, but research on converting user queries into queries based on visualization has not been done yet. Therefore, in this paper, we will focus on query generation in a situation where a data visualization technique has been determined in advance. Supported interactions are filtering on task x-axis values and comparison between two groups. The test scenario utilized data on the number of steps, and filtering for the x-axis period was shown as a bar graph, and a comparison between the two groups was shown as a line graph. In order to develop a natural language processing model that can receive requested information through visualization, about 15,800 training data were collected through a survey of 1,000 people. As a result of algorithm development and performance evaluation, about 89% accuracy in classification model and 99% accuracy in query generation model was obtained.

• Journal of dental hygiene science
• /
• v.9 no.3
• /
• pp.353-360
• /
• 2009

The purpose of this study was to investigate the recognition for improvement of the Korean Dental Hygienists' Licensing Examination(KDHLE). The subjects were 1,048 dental hygienists were surveyed. either in person or through mail. Data was collected using a self administrated questionnaire from July 1 to July 20, 2008. The data were analysed with frequency and $x^2$-test using the SPSS 15.0 windows. For the inquiry where adequacy of subjects of the KDHLE regarding to evaluation of standard duty achievement ability in the real field was asked, 404(39.5%) answered 'Yes', and 680(66.9%) was answered 'Yes' for necessity of changing current subjects of the KDHLE. For the inquiry about the number of questions in the KDHLE, 353(34.6%) answered that current number of questions is 'Inappropriate' and advisable way of improving KDHLE subjects, 463 (45.4%) answered 'enhancing problem solving ability through unifying subjects', the highest of all. About practical examination methods, 647(67.3%) was answered 'Should be modified'. For methods of dental hygienist practical examination, 'clinical demonstration on patients' received the highest number of votes 628(63.6%). According to the above results, most of active dental hygienists at presence expect the alteration of current KDHLE and new items which are reliable for globalization by testing problem solving ability through unified subjects must be introduced.

• Journal of Life Science
• /
• v.28 no.3
• /
• pp.307-313
• /
• 2018

Alopecia cause psychological stress due to their effect on appearance. Thus, the global market size of the alopecia treatment products are growing quickly. Timosaponin A III is the well known active ingredient of Anemarrhenae Rhizoma. In this study, we investigated and compared the binding affinity of timosaponin A III with finasteride (5-beta reductase antagonist) and minoxidil (androgen receptor antagonist) on the target protein active site by in silico computational docking studies. The three dimensional crystallographic structure of 5-beta reductase (PDB ID : 3G1R) and androgen receptor (PDB ID: 4K7A) was obtained from PDB database. In silico computational autodocking analysis was performed using PyRx, Autodock Vina, Discovery Studio Version 4.5, and NX-QuickPharm option based on scoring functions. The timosaponin A III showed optimum binding affinity (docking energy) with 5-beta reductase as -12.20 kcal/mol as compared to the finasteride (-11.70 kcal/mol) and with androgen receptor as -9.00 kcal/mol as compared to the minoxidil (-7.40 kcal/mol). The centroid X, Y, Z grid position of the timosaponin A III on the 5-beta reductase was similar (overlap) to the finasteride, but the X, Y, Z centroid grid of the timosaponin A III on the androgen receptor was significantly far from the minoxidil centroid position. These results significantly indicated that timosaponin A III could be more potent antagonist to the 5-beta reductase and androgen receptor. Therefore, the extract of Anemarrhenae Rhizoma or timosaponin A III containing biomaterials can substitute the finasteride and minoxidil and can be applied to the alopecia protecting product and related industrial fields.

• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.582-587
• /
• 2011

Holdup characteristics of bubble, wake and continuous liquid phases were investigated in bubble columns with viscous liquid media. Effects of column diameter(0.051, 0.076, 0.102 and 0.152 m ID), gas velocity($U_G$=0.02~0.16 m/s) and liquid viscosity(${\mu}_L$=0.001~0.050 $Pa{\cdot}s$) of continuous liquid media on the holdups of bubble, wake and continuous liquid phases were discussed. The three phase such as bubble, wake and continuous liquid phases were classified successfully by adapting the dual electrical resistivity probe method. Compressed filtered air and water or aqueous solutions of CMC(Carboxy Methyl Cellulose) were used as a gas and a liquid phase, respectively. To detect the wake as well as bubble phases in the bubble column continuously, a data acquisition system(DT 2805 Lab Card) with personal computer was used. The analog signals obtained from the probe circuit were processed to produce the digital data, from which the wake phase was detected behind the multi-bubbles as well as single bubbles rising in the bubble columns. The holdup of bubble and wake phases decreased but that of continuous liquid media increased, with an increase in the column diameter or liquid viscosity. However, the holdup of bubble and wake phases increased but that of continuous media decreased with an increase in the gas velocity. The holdup ratio of wake to wake to bubble phase decreased with an increase in the column diameter or gas velocity, however, increased with an increase in the viscosity of con-tinuous liquid media. The holdups of bubble, wake and continuous liquid media could be correlated in terms of operating variables within this experimental conditions as: ${\varepsilon}_B=0.043D^{-0.18}U_G^{0.56}{\mu}_L^{-0.13}$, ${\varepsilon}_W=0.003D^{-0.85}U_G^{0.46}{\mu}_L^{-0.10}$, ${\varepsilon}_C=1.179D^{0.09}U_G^{-0.13}{\mu}_L^{0.04}$.

• Journal of Bio-Environment Control
• /
• v.27 no.2
• /
• pp.166-172
• /
• 2018

This study set out to conduct a field survey with smart greenhouse-based farms in seven types to figure out the actual state of smart greenhouses distributed across the nation before selecting a system to implement an optimal greenhouse environment and doing a research on higher productivity based on data related to crop growth, development, and environment. The findings show that the farms were close to an intelligent or advanced smart farm, given the main purposes of leading cases across the smart farm types found in the field. As for the age of farmers, those who were in their forties and sixties accounted for the biggest percentage, but those who were in their fifties or younger ran 21 farms that accounted for approximately 70.0%. The biggest number of farmers had a cultivation career of ten years or less. As for the greenhouse type, the 1-2W type accounted for 50.0%, and the multispan type accounted for 80.0% at 24 farms. As for crops they cultivated, only three farms cultivated flowers with the remaining farms growing only fruit vegetables, of which the tomato and paprika accounted for approximately 63.6%. As for control systems, approximately 77.4% (24 farms) used a domestic control system. As for the control method of a control system, three farms regulated temperature and humidity only with a control panel with the remaining farms adopting a digital control method to combine a panel with a computer. There were total nine environmental factors to measure and control including temperature. While all the surveyed farms measured temperature, the number of farms installing a ventilation or air flow fan or measuring the concentration of carbon dioxide was relatively small. As for a heating system, 46.7% of the farms used an electric boiler. In addition, hot water boilers, heat pumps, and lamp oil boilers were used. As for investment into a control system, there was a difference in the investment scale among the farms from 10 million won to 100 million won. As for difficulties with greenhouse management, the farmers complained about difficulties with using a smart phone and digital control system due to their old age and the utter absence of education and materials about smart greenhouse management. Those difficulties were followed by high fees paid to a consultant and system malfunction in the order.

• Cartoon and Animation Studies
• /
• s.37
• /
• pp.509-537
• /
• 2014

This paper proposes 'postfilimc metamorphosis' and 'reanimation' as two concepts that aim at giving account to the aesthtetic tendencies and genealogies of what Suzanne Buchan calls 'pervasive animation', a category that refers to the unprecedented expansion of animation's formal, technological and experiential boundaries. Buchan's term calls for an interdisciplinary approach to animation by highlighting a range of phenomena that signal the growing embracement of the images and media that transcend the traditional definition of animation, including the lens-based live-action image as the longstanding counterpart of the animation image, and the increasing uses of computer-generated imagery, and the ubiquity of various animated images dispersed across other media and platforms outside the movie theatre. While Buchan's view suggests the impacts of digital technology as a determining factor for opening this interdisciplinary, hybrid fields of 'pervasive animation', I elaborate upon the two concepts in order to argue that the various forms of metamorphorsis and motion found in these fields have their historical roots. That is, 'postfilmic metamorphosis' means that the transformative image in postfimic media such as video and the computer differs from that in traditional celluloid-based animation materially and technically, which demands a refashioned investigation into the history of the 'image-processing' video art which was categorized as experimental animation but largely marginalized. Likewise, 'reanimation' cne be defined as animating the still images (the photographic and the painterly images) or suspending the originally inscribed movement in the moving image and endowing it with a neewly created movement, and both technical procedues, developed in experimental filmmaking and now enabled by a variety of moving image installations in contemporary art, aim at reconsidering the borders between stillness and movement, and between film and photography. By discussing a group of contemporary moving image artworks (including those by Takeshi Murata, David Claerbout, and Ken Jacobs) that present the aesthetic features of 'postfilmic metamorphosis' and 'reanimation' in relation to their precursors, this paper argues that the aesthetic implications of the works that pertain to 'pervasive animation' lie in their challenging the tradition dichotomies of the graphic/the live-action images and stillness/movement. The two concepts, then, respond to a revisionist approach to reconfigure the history and ontology of other media images outside the traditional boundaries of animation as a way of offering a refasioned understanding of 'pervasive animation'.

• Journal of The Korean Association of Information Education
• /
• v.5 no.1
• /
• pp.33-45
• /
• 2001

In order to adapt ourselves to the Informationalization Society of twenty-first century, it is required to have ability to find quickly the necessary information and solve the problem of our own. In the field of school, it should be educated to develop learner's ability that can cope with the Informationalization Society. When a learner can study in such direction, he or she will be able to plan the learning of his own as the subject of education, and develop his ability to solve the problem by collecting and examining various information. It is self-leading learning that can make education like this possible. Through computer, especially Web site, self-directed learning can develop can develop the individuality and creativity of learners. They can collect and utilize autonomously information and knowledge. To do such an education, the program that can work out self-directed learning is needed. Therefore the program I want to develop is to reconstruct the 'figure' part of mathematics in elementary school into five steps by utilizing Web site. In the first step is to learn the concept of various shape. This step enable learners to know what figure is and how it can be utilized in our real life. The second step of dot, line and angle makes it possible that learners can consolidate the foundation of the study about figure and recognize the relation between angle and figure. In the third step of plane figure, we can study how to calculate the relation of plane figures and the area of figure with various shapes by cutting and adding them. The fourth step is about congruence and symmetry. Learners can learn to know the figure in congruence, reduction and enlargement and how it is used in our real life. In the fifth step of solid figure, we can learn the relation among the plane figure, solid figure, the body of revolution, corn and pyramid etc. controling the speed of learning on the basis of his ability. In the process of the program, it is also possible to develop learner's ability of self-leading learning by solving the problem by himself. Because this program is progressed on the Web site, it is possible to learn anytime and anywhere. In addition to it, a learner can learn beyond the grade as well as do the perfect learning by controling the pace of learning on the basis of his ability. In the process of the program, it is also possible to develop learner's ability of self-leading learning by solving the problem by himself.

• Journal of the Korea Concrete Institute
• /
• v.19 no.1
• /
• pp.121-130
• /
• 2007

To investigate the enhancement in strength and deformation capacities of concrete confined by FRP composites, tests under axial loads were carried out on three groups of thirty six short columns in circular section with diverse GFRP confining reinforcement. The major test variables considered include fiber content or orientation, wrap or tube type by varying the end loading condition, and continuous or discontinuous confinement depending on the presence of vortical spices between its two halves. The circumferential FRP strains at failure for different types of confinements were also investigated with emphasis. Various analytical models capable of predicting the ultimate strength and strain of the confined concrete were examined by comparing to observed results. Tests results showed that FRP wraps or tubes provide the substantial increase in strength and deformation, while partial wraps comprising the vertical discontinuities fail in an explosive manner with less increase in strength, particularly in deformation. A bilinear stress-strain response was observed throughout all tests with some variations of strain hardening. The failure hoop strains measured on the FRP surface were less than those obtained from the tensile coupons in all tests with a high degree of variation. In overall, existing predictive equations overestimated ultimate strengths and strains observed in present tests, with a much larger scatter related to the latter. For more accuracy, two simple design- oriented equations correlated with present tests are proposed. The strength equation was derived using the Mohr-Coulomb failure criterion, whereas the strain equation was based on entirely fitting of test data including the unconfined concrete strength as one of governing factors.