• Journal of Nutrition and Health
• /
• v.41 no.1
• /
• pp.41-53
• /
• 2008

Gestational diabetes mellitus (GDM) is defined as glucose intolerance discovered or onset during pregnancy and attention is needed because of increased risk of perinatal morbidties and higher incidence of diabetes afterward. This study was performed to identify dietary factors associated with the development of gestational diabetes mellitus (GDM). Developed food frequency questionnaire containing 192 food items were used to assess nutritional status of 246 control subjects and 104 GDM subjects. Food habits of subjects were examined in the questionnaire. The more irregularity and less variety of meal were found in GDM group compared to control group and GDM group tended to eat rapidly and do not like vegetables and greasy foods. Total score of food habits in GDM was lower than control group, which suggests that GDM group have undesirable food habits. Mean daily energy and carbohydrate intakes of GDM group were higher than those of control group, and percent energy from protein was significantly higher in control. Nutrient density of protein, calcium, phosphorus and vitamin BI of GDM group was significantly lower than those of control group. Therefore dietary quality of GDM group was lower than that of control group. Odds ratio for GDM was high when energy and carbohydrate intakes were high. And when the intakes of rice, noodle, shiruduk, hamburger, boiled egg, steamed pork shank were high, the odds ratio for GDM was high. These results indicate that the amount and frequencies of several foods and dish items were related with the occurrence of GDM subjects. On the whole, GDM subjects consumed more cereals and less vegetables and less legumes. From these results, pregnant women with GDM tended to have unhealthy food habits, and carbohydrate intake was important dietary factors on the onset of GDM.

• The KIPS Transactions:PartA
• /
• v.12A no.5 s.95
• /
• pp.413-420
• /
• 2005

The Newton-Raphson iterative algorithm for finding a floating point reciprocal square mot calculates it by performing a fixed number of multiplications. In this paper, a variable latency Newton-Raphson's reciprocal square root algorithm is proposed that performs multiplications a variable number of times until the error becomes smaller than a given value. To find the rediprocal square root of a floating point number F, the algorithm repeats the following operations: '$X_{i+1}=\frac{{X_i}(3-e_r-{FX_i}^2)}{2}$, $i\in{0,1,2,{\ldots}n-1}$' with the initial value is '$X_0=\frac{1}{\sqrt{F}}{\pm}e_0$'. The bits to the right of p fractional bits in intermediate multiplication results are truncated and this truncation error is less than '$e_r=2^{-p}$'. The value of p is 28 for the single precision floating point, and 58 for the double precision floating point. Let '$X_i=\frac{1}{\sqrt{F}}{\pm}e_i$, there is '$X_{i+1}=\frac{1}{\sqrt{F}}-e_{i+1}$, where '$e_{i+1}{<}\frac{3{\sqrt{F}}{{e_i}^2}}{2}{\mp}\frac{{Fe_i}^3}{2}+2e_r$'. If '$|\frac{\sqrt{3-e_r-{FX_i}^2}}{2}-1|<2^{\frac{\sqrt{-p}{2}}}$' is true, '$e_{i+1}<8e_r$' is less than the smallest number which is representable by floating point number. So, $X_{i+1}$ is approximate to '$\frac{1}{\sqrt{F}}$. Since the number of multiplications performed by the proposed algorithm is dependent on the input values, the average number of multiplications Per an operation is derived from many reciprocal square root tables ($X_0=\frac{1}{\sqrt{F}}{\pm}e_0$) with varying sizes. The superiority of this algorithm is proved by comparing this average number with the fixed number of multiplications of the conventional algorithm. Since the proposed algorithm only performs the multiplications until the error gets smaller than a given value, it can be used to improve the performance of a reciprocal square root unit. Also, it can be used to construct optimized approximate reciprocal square root tables. The results of this paper can be applied to many areas that utilize floating point numbers, such as digital signal processing, computer graphics, multimedia, scientific computing, etc.

• The KIPS Transactions:PartD
• /
• v.10D no.7
• /
• pp.1149-1154
• /
• 2003

Due to various requirements for the user access control to large databases in the hospitals and the banks, database security has been emphasized. There are many security models for database systems using wide variety of policy-based access control methods. However, they are not functionally enough to meet the requirements for the complicated and various types of access control. In this paper, we propose a database security system that can individually control user access to data groups of various sites and is suitable for the situation where the user's access privilege to arbitrary data is changed frequently. Data group(s) in different sixes d is defined by the table name(s), attribute(s) and/or record key(s), and the access privilege is defined by security levels, roles and polices. The proposed system operates in two phases. The first phase is composed of a modified MAC (Mandatory Access Control) model and RBAC (Role-Based Access Control) model. A user can access any data that has lower or equal security levels, and that is accessible by the roles to which the user is assigned. All types of access mode are controlled in this phase. In the second phase, a modified DAC(Discretionary Access Control) model is applied to re-control the 'read' mode by filtering out the non-accessible data from the result obtained at the first phase. For this purpose, we also defined the user group s that can be characterized by security levels, roles or any partition of users. The policies represented in the form of Block(s, d, r) were also defined and used to control access to any data or data group(s) that is not permitted in 'read ' mode. With this proposed security system, more complicated 'read' access to various data sizes for individual users can be flexibly controlled, while other access mode can be controlled as usual. An implementation example for a database system that manages specimen and clinical information is presented.

• Korean Journal of Psychosomatic Medicine
• /
• v.11 no.2
• /
• pp.118-136
• /
• 2003

Objective: This study is to examine the neuropsychological and developmental characteristics of the Computerized Neurocognitive Function Test among normal children in elementary school. Methods: K-ABC, K-PIC, and Computerized Neurocognitive Function Test were performed to the 120 body of normal children(10 of each male and female) from June, 2002 to January, 2003. Those children had over the average of intelligence and passed the rule out criteria. One-way ANOVA and Bonferroni were used for statistical analysis. Results: In sampling of normal children in elementary school, the control of intelligence level and strict rule out criteria were applied. As a result, although 21.1% were excluded from of total participants, the children that passed the rule out criteria had over the average of intelligence and not differ in the intelligence level among the graders. Comparing Computerized Neurocognitive Function Test results among the graders, almost of variables had significant difference among the graders and especially between the 1st to 2nd and the 5th to 6th graders. In the attention tests, as rising the graders, the performance of tests were improved. In the short-term memory tests, the difference between forward and backward tests were same as the previous research result. The verbal auditory learning test composed of recall task and visual figure memory test composed of recognition task were same as the previous research result using the individual power or achievement test and also as rising the graders, the performance of those tests were improved. The higher cognitive function tests had the same results with other tests. Conclusion: The Computerized Neurocognitive Function Test devised for adult can be used of assessing child neuropsychological characteristics. For this objective, more strict sampling criteria, control of the intelligence and psychopathology were needed.

• Journal of Distribution Science
• /
• v.14 no.3
• /
• pp.55-62
• /
• 2016

Purpose - Average using time of smart-phone for Korean people is 3 hours 39 minutes and most people who are using a computer at home and their workplace can be affected over force to neck and shoulder due to unstable body posture. musculoskeletal disorders which caused by unstable body posture can affect strongly to decrease work efficiency. So this research is designed to measure the effect of using computer & smart-phone on decreased work efficiency due to musculoskeletal disorders and mediating effect between decreased work efficiency and musculoskeletal disorders. Research Design, Data, and Methodology - The author has developed a questionnaire with 6 hypothesis on the basis of previous research result with 5 constructs. The questionnaires were also made by interview and E-mail. 300 copies of questionnaires were distributed and 282 questionnaire were used for the analysis as valid data responses. SPSS ver.21.0 were used and made Cronbach's α and reliability test, correlation, Baron & Kenny 3 step mediated regression analysis. Result - Cronbach's α shows 0.770~0.954 and C.R. is 0.963~0.997 which is higher than 0.7. and AVE was 0.867~0.933. So the data are all acceptable condition. Using for a long time of a computer & smart-phone has a positive effect on musculoskeletal disorders. This means, it can cause musculoskeletal disorders if people use a computer & smart-phone for a long time due to unstable body posture. And musculoskeletal disorders can effect strongly decrease work efficiency. This study also found out that a long time of using computer can cause musculoskeletal disorders rather than using smart-phone a long time. To check mediate effect of musculoskeletal disorders between using a computer & smart-phone and Decreased Work Efficiency, author used 3-step mediated regression analysis of Baron & Kenny (1986). Using a computer for a long time mediate partially and using a smart-phone for a long time mediate completely. This means that using a smart-phone a long time is not the actual reason to decrease work efficiency. But using level of smart-phone is increasing rapidly day by day. So we need to make additional research about this matter seriously. Conclusion - Nowadays, people can not live on without a computer & smart-phone even a moment. But, using a computer for a long time will affect to cause musculoskeletal disorders and it will effect strongly to decrease work efficiency. Before, we thought over that musculoskeletal disorders were diseases of elder people. But, we found out from this study that musculoskeletal disorders can be happen to any people, even children, or workers in heavy industry or engaged in brain work. So we need to be careful when we use a computer for a long time. People also need to be careful to keep correct body posture when using both a computer and smart-phone since a smart-phone became more popular and using time level became longer. Due to increased income and living standard of people, physical growth of young people is so rapid. But the physical environment of society is not suitable for them since it can not follow up the speed of growth. Suitable work table is very important to prevent musculoskeletal disorder which can affect decrease work efficiency. For a person, a society or country, increased productivity is very important since it can directly connected to the job satisfaction. Education and reeducation for the people is also important, but to teach them how to keep good condition of health will be more important since it can increase the quality of work efficiency and quality of life. Computer and Smart-phone is one the best invention of modern society, but it can cause mental and physical disease which can affect decrease work efficiency and productivity. So it is necessary to observe attentively for the situation continually.

• Cartoon and Animation Studies
• /
• s.22
• /
• pp.47-63
• /
• 2011

Recently, contemporary cultural contents have been shown its diversity changes followed by the birth of new media platforms with consumers' new needs in the global market. Also, developments of Internet and computer system networks are the main contributors of making this changes happened rapidly. This study aims to know that how to usefully use those new media platforms through the great example of stop-motion animation music video by analyzing its production and marketing process. The music video production had been focused to be completed with high quality by adjusting the production process economically in spite of the relatively short period(less than one month)from its crank-up to the deadline. Because the production was planned that main characters lead the whole story, the creative team had been tried to reduce the production hours by commonly use the same mold when they make original clay models by collecting the similarities of characters' appearances. By using CG technic, could overcome the visual monotonous from the similarities which inferred above. Also, the repeated rhythm in the music video, the similar scenes of backgrounds were commonly used by copy of the original scene. At the point of directing, the creative team considered both economical and art aspects for the quality work. In details, they divided the scenes into foreground and background, and removed unnecessary parts to save the production hours and budget but make depth of fields in the scenes. Except the viral marketing purposes, was searching for the methods to compensate the production cost. For this, the characters in the music video dressed the same T-shirts which are world-cup logo on, and those were designed for the sale after released the music video. Even the result of the sales was not enough to satisfied, it was estimated a great attempt to the domestic animation industry.

• Cartoon and Animation Studies
• /
• s.49
• /
• pp.611-631
• /
• 2017

At first there was practice, then festivals and theory followed. Compared to the animation production, which is older then the medium film itself, festivals and theory in this area started with a delay. While animation programs where shown in film festivals like Cannes since the mid 1940s, the first animation festival in Annecy, France was founded in 1960, followed by several short-lived events in Romania, Italy and Tokyo and finally in 1972 by the second oldest festival up to date, Animafest Zagreb. Animation theory evolved in the late 1980s in the Anglo-American area with associations like the Society for Animation Studies, following its 'big sister' film studies. Expanding ever since as a research area, European animation studies in e.g. France, German speaking countries, Poland or Croatia have been catching up in recent years by organizing theoretical conferences and publications. A vivid synergy between practice, festivals and theory has always been a key factor for establishing a platform for the art form and culture of animation. However, in the past few years a trend could be observed towards a more intense interaction between animation festivals and theory. Animation festivals are hosting theoretical and scientific symposia or conferences, which are open for artist positions and insights into the industry. At the beginning of the lecture a short reflection of the concept of Animafest Scanner itself is followed by an introduction of the Symposium Expanded Animation at the media festival Ars Electronica Linz. The talk will subsequently focus on the multilayered academic symposia at the Festival of Animated Film ITFS and the International Conference on Animation, Effects, VR, Games and Transmedia in Stuttgart. These case studies will reveal the blurring boundaries between art, science, theory and industry as well as the specificities of the interplay between artists, practitioners, scholars, curators and festival visitors in different formats.

• Cartoon and Animation Studies
• /
• s.49
• /
• pp.633-649
• /
• 2017

The purpose of this study is to conceptualize the changing aspects of human freedom of observation and viewing as the visual media evolves from film to 3D stereoscopic film and VR. The purpose of this study is to conceptualize the aspect of freedom and viewing aspect from the viewpoint of genealogy. In addition, I will identify the media aesthetic characteristics of VR and identify the identity and ontology of VR. Media has evolved around the most artificial sense of human being. There is a third visual space called screen at the center of all the reproduction devices centering on visual media such as painting, film, television, and computer. In particular, movies, television, and video screens, which are media that reproduce moving images, pursue perfect fantasy and visual satisfaction while controlling the movement of the audience. A mobilized virtual gaze was secured on the assumption of the floating nature of the so-called viewers. The audience sees a cinematic illusion with a view while seated in a fixed seat in a floating posture. They accept passive, passive, and passively without a doubt the fantasy world beyond the screen. But with the advent of digital paradigm, the evolution of visual media creates a big change in the tradition of reproduction media. 3D stereoscopic film predicted the extinction of the fourth wall, the fourth wall. The audience is no longer sitting in a fixed seat and only staring at the front. The Z-axis appearance of the 3D stereoscopic image reorganizes the space of the story. The viewer's gaze also extends from 'front' to 'top, bottom, left, right' and even 'front and back'. It also transforms the passive audience into an active, interactive, and experiential subject by placing viewers between images. Going one step further, the visual media, which entered the VR era, give freedom to the body of the captive audience. VR secures the possibility of movement of visitors and simultaneously coexists with virtual space and physical space. Therefore, the audience of the VR contents acquires an integrated identity on the premise of participation and movement. It is not a so-called representation but a perfection of the aesthetic system by reconstructing the space of fantasy while inheriting the simulation tradition of the screen.

• Journal of Nutrition and Health
• /
• v.43 no.4
• /
• pp.374-381
• /
• 2010

This study was performed to examine the diet effect of green coffee bean extract on body fat reduction. Overweight/obese women (body mass index > $23\;kg/m^2$ or body fat > 27%) who were not diagnosed any type of disease were included in this study and subjects were randomly assigned to green coffee bean extract group (n = 23) or placebo group (n = 20). We measured anthropometric parameters, abdominal fat distribution by computed tomography and blood components before and after the 8-weeks intervention period. After supplementation, green coffee bean extract group showed a significant reduction of body weight (p < 0.01), body fat percent (p < 0.01), total fat area at L1 vertebra (-4.8%, p < 0.05) and visceral fat area at L4 vertebra was(-4.7%, p < 0.05). In addition, total fat area and visceral fat area at L1 vertebra decreased significantly in green coffee bean extract group compared with placebo group (p < 0.05, p < 0.05 respectively). The result of present study demonstrated that the supplementation of green coffee bean extract for 8 weeks can give beneficial effects on body fat reduction and visceral fat accumulation.

• Science of Emotion and Sensibility
• /
• v.10 no.3
• /
• pp.331-342
• /
• 2007

This study focused on developing MP3 smart clothing products and usability evaluation. MP3 smart clothing which was developed in this study contains e-textile keypad and a kit. The kit consists of MP3 Player, remote controller module and ear phone, and are easy to assemble and dismantle. And usability evaluation about MP3 smart Clothing which was developed in this study contains e-textile keypad and a kit. For making the MP3 Smart clothing, e-textile signal line and keypad was developed and a metal connection ring also was manufactured to adhere closely e-textile signal line to keypad. The last products are two kinds of MP3 smart clothing, jacket style of MP3-YSJ(Yonsei Smart Jacket) and safari style of MP3-YSS(Yonsei Smart Safari). Then usability evaluation conducted two times about MP3 smart clothing developed. Usability evaluation is classified by a module evaluation and an item evaluation. The module evaluation measured external appearance, material, a music controller, an ear phone(or a mini speaker) and connector. The item evaluation measured social acceptance, feeling of wearing, utility, easiness of maintenance and safety. The module evaluation described totally positive results in the first usability evaluation about MP3-YSJ 1.0 and MP3-YSS 1.0. The item evaluation shows a lower score in the social acceptance, especially the easiness of connector maintenance and the social acceptance of music-controller in MP3-YSJ 1.0 and MP3-YSS 1.0. The second usability evaluation conducted with improved products by the first usability test results. Results from second item evaluation indicated needs to improve the easiness of connector & music-controller maintenance and the social acceptance of music-controller in MP3-YSJ 2.0. In MP3-YSS 2.0, the easiness of material management and the social acceptance of music controller & connector needed to improvement. In particular, users felt inconvenience in the social acceptance because of e-textile keypad arrangement. To outweigh this disadvantage, further study is needed about keypad interface of the music controller.