• Food Engineering Progress
• /
• v.23 no.1
• /
• pp.22-29
• /
• 2019

This study was carried out using Celluclast 1.5L to increase the content of 2,6-DMBQ and water extractable arabinoxylan in wheat germ extract. Extraction temperatures were 30℃, 45℃ and 60℃. The extraction times were 0, 6, 12, 18, 24 and 30 h. The pH of the extract decreased rapidly from 18 h at 30℃ in both water- and enzyme-treated extracts. 2,6-DMBQ of water- and enzyme-treated extracts increased with the extraction time. At 30-hour extraction time, enzyme-treated extract increased 27.60% at 30℃ extraction temperature than water extraction. Extraction temperatures of 45℃ and 60℃ were increased by 65.03% and 151.05%, respectively. The highest content of water-extractable arabinoxylan was 15.23±0.08 mg/g when the enzyme was treated at an extraction temperature of 60℃ for 30 h. At 30=hour extraction time, enzyme-treated extract increased 7.92% at 30℃ extraction temperature compared to water extraction. Extraction temperatures of 45℃ and 60℃ were increased by 31.20% and 54.38%, respectively.

• Korean Journal of Food Science and Technology
• /
• v.38 no.4
• /
• pp.495-500
• /
• 2006

The physicochemical properties of brown rice flours produced under different drying and milling conditions were investigated. Moisture contents of hot-air dried, microwave dried and zet-milled brown rice flours (BrWZH) were 10.7%,13.7% and 8.0%-8.6%, respectively. Water absorption indices (WAI) and water soluble indices (WSI) of roll-milled brown rice flours (BrWRH) were lower (0.40-0.59 g/g; 0.7-3.0%) than those of zet-milled brown rice flours (0.58-0.79 g/g; 4.0-7.3%). Zet-milled brown rice flours had higher Hunter L values and more damaged starch (94.1-96.8; 28.2%) compared to roll-milled brown rice flours (91.3-91.9: 15.5%). The percentage of damaged starch and L values of brown rice flours increased as particle size of brown rice flours decreased. Roll-milled polished rice flour (Control) had the highest L value and lowest amount of damaged starch (97.1; 8.2%). Control, BrWRH, BrWZH, and ultrafine brown rice flour (HBrZMU) had peak viscosity values of 321, 255, 221, and 162 RVU, respectively and trough viscosity values of 217, 185, 175, and 113 RVU, respectively. Peak and trough viscosity (Rapid Visco Analyzer; RVA) properties of rice floors decreased as the particle size of rice flours decreased. HBrZMU demonstrated a higher onset temperature $(61.1^{\circ}C)$ compared to control $(54.8^{\circ}C)$ by differential scanning calorimetric (DSC). Crystal melting enthalpy $({\Delta}H)$ of control and brown rice flours were 10.4 J/g and 6.1-8.7 J/g, respectively. Results of this study suggested that physicochemical properties of brown rice flours were closely related to their particle size.

• Korean Journal of Food Science and Technology
• /
• v.8 no.4
• /
• pp.260-262
• /
• 1976

한국산 쌀보리 2개품종 및 겉보리 2개품종을 Buhler test mill에 의하여 제분(제분수율은 쌀보리 약 70%, 겉보리 61%) 한 후 주요 무기질 및 비타민, 아미노산을 분석하여 다음과 같은 결과를 얻었다. 무기질성분중 P의 함량(0.19-0.27%)이 높았고 K 는 0.18-0.27%, 그리고 미량의 Ca 및 Fe가 함유되고 있었다. 비타민중 A 및 C는 거의 함유되어 있지 않았고 $B_1,\;B_2$ 및 niacin은 각각 3.6-5.7, 0.9-1.6 및 $27-39{\mu}g/g$의 범위를 보였다. 보리가루류의 아미노산조성은 품종간에 다소 차이를 보였으며 제한아미노산은 lysine으로서 보리가루 단백질의 amino acid score(FAO 아미노산 표준구성 기준)는 부흥이 61.7, 기타는 모두 58 내외를 보이고 있었다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.02a
• /
• pp.363-368
• /
• 2000

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2002.08a
• /
• pp.150.2-150
• /
• 2002

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.4
• /
• pp.686-697
• /
• 1994

The hardness of hard red winter (HRW) wheat had an effect on the yield of farina , as it positively correlated with the coarse fraction (over 34W) and negatively correlated with the flour fraction from farina milling. But it did not show any significances on flour milling from the micromilling process. The flour yields was better correlated with the break flour fraction (r=0.730 than with reduction flour (r=0.27). The farina yield was controlled by a fraction over 34W (coarse granule0. Protein was the most important single factor for the quality of cooked farina spaghetti, but not for flour milling or farina milling. On the other hand, hardness was important in the production of farina milling , whereas it did not govern spaghetti cooking quality, Environmental factors affected the quality of cooked spaghetti as much as varieties of HRW wheats. The quality of cooked farina spaghetti generally correlated with the protein in the location composites of wheats. Higher protein content wheats showed better spaghetti cooking quality.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.10
• /
• pp.57-60
• /
• 1971

In this experiment 5 Korean varieties and 3 U.S.A. varieties of wheat were investigated for their moisture content, ash content, crude protein content and extraction rate. The results are summarized as follows; 1. In the case of U.S.A. wheat, the ash content is directly proportional to the content of protein but the extraction rate is negatively correlated to the content of ash. 2. In the case of korean wheat, there is no proportional tendency as in the U.S.A. wheat. It might be cause by the low extraction rate where the endosperm is hardly separated from the bran layer at the same conditions of temering process. 3. The concentration of protein particles in the endospern, is centrifugal in the U.S.A. wheats, but in the Korean varieties the direction is oppositional to the U.S.A. varieties. 4. Yooksung ＃3, Cahngkwang, Youngkwang and Hard winter wheat are adapted to the production of all purpose flour or noodle flour; Noring ＃4, Jinkwang and Softwhite wheat are suitable for the process of cake flour; and Dark northern spring is just adaped to the production of bread flour.

• Korean Journal of Food Science and Technology
• /
• v.15 no.3
• /
• pp.215-219
• /
• 1983

Rheological properties of the dough made from milled wheat products of various particle size, i.e., wheat shorts, girls and flour, and their effect on the loaf-volume potential of whole wheat bread were investigated in this study. One Korean wheat variety 'Cho-Kwang' was tested for suitability in whole wheat bread. The percent ash and protein content of the milled wheat products were 2.3% and 13.7% respectively. Ranges of 7.3, 5.6 and 4.8 mixograph peak-height were observed in Fraction 1(wheat flours), Fraction 2 (wheat girts) and Fraction 3(wheat shorts), respectively. Dought stability of Fraction 1 did not decreased appreciably as compared to that of commercial first grade baker's flour. Bread-baking test employing a standard formula showed that the wheat grits (0.2-0.5 mm in diameter) appeared to be the limit beyond which a rapid decrease in loaf-volume potential was noted. Optimum loaf volume and crumb characteristics were obtained in 80% wheat grits/20% wheat flour blend.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.24 no.1
• /
• pp.37-45
• /
• 1979

Experiments were conducted to determine the physicochemical properties for 1.382 tested wheat harvested in 1977. All the tested wheats had a milling yield rate of 49 to 71.5 percent. The cross combination involving S.son, Caprock and CI 12703 was generally the higher in flour yield-Flour protein content ranged from about 7 percent up to about 17 percent and sedimentation values ranged from below 20 cc to 70 cc. The cross combinations involving Bb #1 gave higher protein content and higher sedimentation values than the other combinations. The distribution of the Pelshenke value was from less 20 min. to more than 180 min. Specific sedimentation values of the 329 tested wheats showed 8.1 percent to be hard quality, while 54.4 percent were of soft quality. Intermediate wheats accounted for 37.5 percent. The lines having high milling yield rate, protein content and sedimentation value from the 329 tested wheats were Strampelli \times 69D-3607/Jogwang. S.son \times Caprock. Suweon #185 \times Toropi and Suweon #185 \times Ciano. The varieties or lines including Pribog, CI 14496 and Sturdy \times Scout/ Strampelli \times Bb-Cno showed high milling yield but low protein content and low sedimentation values. being under 9 percent and 30 cc respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.1
• /
• pp.63-72
• /
• 1994

The relationships among the endosperm structure, physicochemical characteristics and cooking and milling properties were examined in this study by using the isogenic lines which have the same genetic background except starch characteristics. The isogenic lines were bread by combining three pairs of genes, of waxy or non-waxy, fractured or round starch granule, and shrunken or plump endosperm. Although grains weight and chemical compositions of the endosperms did not differ widely, but cooking qualities, amylose contents, $\beta$-glucan viscosities were significant differences between isogenic types. Water absorptions and expansibilities were highest in waxy lines, and lowest in fratured starch granular lines; the smaller the seed sizes were, the higher the water absorptions were. Mixogram pattern of cooked barley varied with the starch properties and milling properties were excellent in fractured granular lines, whereas those properties of the waxy and shrunken endosperm lines were not good.