• The Korean Journal of Pesticide Science
• /
• v.6 no.3
• /
• pp.175-182
• /
• 2002

This experiment was conducted to investigate the effects of acid rain in spraying copper hydroxide 77% wettable power(WP) on leaf surface morphology and crop injury of the garlic(Allium sativum L.). Leaf chlorosis, hooked leaves, wrinkled epidermal cells and increased stomata open of garlic were induced by foliar application of simulated acid rain(SAR). It was become to be severe in application of copper hydroxide solution after application of SAR, but those yield of garlic was not significantly different from the untreated control. Leaf chlorosis was sharply increased above 100 ppm of copper ions. Amount of solved copper ions in copper hydroxide solution was remarkably increased below pH 5.5 and the residue in garlic leaves was significantly increased by application of copper hydroxide solution after spraying SAR compared with application of copper hydroxide solution only. When calcium carbonate was applied together with copper hydroxide leaf chlorosis was less than copper hydroxide only.

• Polymer(Korea)
• /
• v.32 no.6
• /
• pp.587-592
• /
• 2008

High molecular weight poly(vinyl alcohol) (PVA) hydrogel to be expected as a candidate material for the wound-dressing was successfully prepared by electron beam (EB) irradiation. To produce PVA hydrogels with various gel fractions, degrees of swelling in water, gel strengths, and elongations, two different number-average degrees of polymerization [($P_n$)s] of PVA were adapted such as 1700 and 4000, and the PVA solution concentration and irradiation dose of EB were controlled to range of 5 $\sim$ 20% and 30 $\sim$ 100 kGy, respectively. The gel fraction and strength of PV A hydrogel were increased with increasing molecular weight of PVA, solution concentration, and irradiation dose of EB. On the contrary, the degree of swelling and elongation of PVA hydrogel were decreased. The thermal property and crystallinity related to degree of crosslinking of PVA hydrogel were examined by the analyses of differential scanning calorimetry and X-ray diffraction.

• The Korean Journal of Pesticide Science
• /
• v.16 no.4
• /
• pp.343-349
• /
• 2012

Exposure and risk assessments were conducted to evaluate the relative safety of mixing/loading work of indoxacarb between wettable powder (WP) and water dispersible granule (WG). Hand exposure was monitored using cotton gloves while inhalation exposure was measured using personal air monitor. Method validation for the exposure monitoring was established successfully through several experiments. Limit of determination and limit of quantitation were 0.25 and 1 ng, respectively. $R^2$ of calibration curve linearity was more than 0.9999 and reproducibility was 0.7-6. Recovery of indoxacarb from gloves, solid sorbent and glass fiber filter at three different levels was 81.5-108.8%. Trapping efficiency and breakthrough tests gave 981.5-108.8% of recovery. During mixing/loading procedure, hand exposure amount (75 percentile of 30 repetitions) for indoxacarb WP was 6 folds (459.8 mg/kg a.i) than that of WG (81.4 mg/kg a.i). This result indicates that WG has less drift than WP thanks to its granular type of formulation. Inhalation amount was $10^{-8}-10^{-7}%$ of spray mixture prepared and $10^{-4}-10^{-3}%$ of hand exposure. In inhalation case, no significant differences were observed between two formulations. Margin of safety was calculated for risk assessment using male Korean average body weight and acceptable operator exposure level as the important exposure factors. Mixing/loading procedures for both of the formulations were considered to be of least risk because calculated MOS values were more than 1.

• Research in Plant Disease
• /
• v.10 no.3
• /
• pp.159-166
• /
• 2004

This study were carried out to identify pathogens and determine the seasonal occurrence and chemical control of safflower (Carthamus tinctorius) diseases from 2000 to 2002 in Gyengbuk province, Korea. Major diseases of safflower were, anthracnose caused by Colletotricum acutatum in open field, and gray mold by Botrytis cinerea in rain sheltered plastic house. Other diseases occurred were powdery mildew caused by Sphaerotheca fuliginea, collar rot by Sclerotium rolfsii, leaf spot by Alternaria carthami and A. alternata, rust by Puccinia carthami, root-rot and stem-rot by Phytophthora cactorum, root-rot and wilt by Fusarium oxysporum and damping-off by Pythium ultimum. Seasonal occurrence of anthracnose on safflower has begun from late April, and increased until harvesting, especially rapid increased after rainfall during stem elongation season that is from May to June. In open fields, maximum incidence of anthracnose was 67 ％ in late July. But in rain-sheltered plastic house, it was very low, about 5％ in July. Gray mold caused by Botrytis cinerea was most important disease in rain-sheltered plastic house cultivation. Maximum incidence of gray mold on floral head was 27.4％, whereas other diseases occurred below 1 ％. In the test of the chemical control of the safflower anthracnose, metiram WP, carbendazim$.$kasugamycin WP and iminoctadintris$.$thiram WP were the highest controlling chemicals. In chemical control of gray mold, iminoctadintris$.$thiram WP, fluazinam WP and iprodion WP showed highest controlling effects.

• Membrane Journal
• /
• v.27 no.5
• /
• pp.389-398
• /
• 2017

The most important characteristic of the polymer electrolyte membranes (PEMs) for fuel cells, the proton conducting ability is mainly influenced by the distribution and morphology of the water channels inside the PEMs. Non-perfluorinated hydrocarbon PEMs are known to have weaker water channels than perfluorinated PEM, Nafion, and thus relatively low proton conducting ability. In this study, we used a mesoscale simulation technique to observe the water channel formation and phase separation behavior of hydrocarbon PEM, sulfonated polyimides, under the humidification condition. It was observed that the water molecules were distributed evenly through the entire hydrophilic region, and clear water clusters were formed only in the sulfonated polyimide having high sulfonation degree. In addition, it was observed that sulfonated polyimides have a difficulty in forming water channel under the low hydrated condition. These results clearly support the theories of the formation of water channels in non-perfluorinated hydrocarbon PEMs, and also well explain the tendency of proton conducting abilities of sulfonated polyimides. Thus, it is confirmed that mesoscale simulation techniques can be very effective in analyzing phase separation behavior and water channel formation in PEMs for fuel cells and elucidating the ion conducting abilities.

• Korean Journal of Environmental Biology
• /
• v.28 no.3
• /
• pp.172-178
• /
• 2010

The bloom of the genus Stephanodiscus was gradually extinguished after 18 April. Counts of bacterial population were increased as the diatom bloom was disappeared. Numbers of the heterotrophic nanoflagellates and ciliates were also increased during the disappearance of the bloom. The densities of the mesozooplankton, the major predator of the diatoms, started to increase in April. However, their growth was suppressed during the bloom period of the diatoms (from January to March). During the bloom period of the diatoms, the monthly average value of the basic productivity amounted up to 11,765.7 mgC $m^{-2}day^{-1}$, which is relatively high value considering the low temperature and light during that period. The growth rate of phytoplankton in March, when the bloom was beginning to be supressed was 0.007. The growth rate of phytoplankton was negative value in April when the decreasing of the algal density was started.

• Korean Journal of Environmental Biology
• /
• v.23 no.3 s.59
• /
• pp.304-314
• /
• 2005

The occurrence of cyanobacterial bloom in Korean lakes of the summer is generalized. The characteristic of cyanobacterial community was explored. And the developmental stage of cyanobacterial bloom was divided into three phases, 'preparatory phase', 'bloom phase' and 'extinction phase' Cyanobacterial bloom started during the end of June at site 1, transition Bone of Lake Daecheong. The period of water bloom in normal year was about 60~70 days at site 4, lacustrine Bone, but it was unusually 11 days from July 19 in 1999. M. aerugilnosa first occurred in June, had a peak of standing crop curve from the end of August to the beginning of September in 1998 and 2002 and the end of July in 1999 and 2001. The standing crop of M. aeruginosa occupied $68.1\%$ of phytoplankton, $74.2\%$ of cyanobacteria and $88.8\%$ of genus Microcystis, Anabaena spp. first occurred in April, was above 10,000 cells $mL^{-1}$ from the end of August to about the middle of September in 1998. The effect of rainfalls on cyanobacterial bloom was different according to the phases. The rainfalls of preparatory phase assist the growth of cyanobacteria, but accelerate the decrease of cyanobacteria in extinction phase. In bloom phase, the heavy rainfalls reduce the development of the bloom, while the slight ones display only a little effects.

• Journal of the Korea Concrete Institute
• /
• v.27 no.2
• /
• pp.115-125
• /
• 2015

This study investigated the fluidity, heat of hydration, setting time, strength development, and characteristics of hydration and pozzolanic reactions of high-strength high-volume ground granulated blast-furnace slag(GGBFS) blended cement pasts with the water-to-binder ratio of 20% by experiments, and analyzed the effects of the replacement ratio and fineness of GGBFS on the hydration and pozzolanic reaction. The results show that, in the high-strength mixtures with low water-to-binder ratio, the initial hydration is accelerated due to the "dilution effect" which means that the free water to react with cement increases by the replacement of cement by GGBFS, and thus, strengths at from 3 to 28 days were higher than those of plain mixtures with ordinary Portland cement only. Whereas it was found that the long term strength development is limited because the hydration reaction rates rapidly decreases with ages and the degree of pozzolanic reaction is lowered due to insufficient supply of calcium hydroxide according to large replacement of cement by GGBFS. Also, the GGBFS with higher fineness absorbs more free water, and thus it decreases the fluidity, the degree of hydration, and strength. These results are different with those of normal strength concrete, and therefore, should be verified for concrete mixtures. Also, to develop the high-strength concrete with high-volume of GGBFS, the future research to enhance the long-term strength development is needed.

• Journal of the Korea Concrete Institute
• /
• v.17 no.4 s.88
• /
• pp.581-586
• /
• 2005

High-performance concrete (HPC), which is particularly sensitive to self-desiccation, is required to be durable even in severe environmental conditions, i.e. costal area, cold district, etc. However, in recent years, some attention was particularly given to cracking sensitivity of high performance concrete at early age. It has been argued and demonstrated experimentally that such concrete undergoes autogenous shrinkage due to self-desiccation at early age under restrained condition, nd, as a result, internal tensile stress may develop, leading to micro cracking and macro cracking. This shrinkage-introduced crack produces a major serviceability problem for concrete structures. One possible method to reduce cracking due to autogenous shrinkage is the addition of expansive additive. Tests conducted by many researches have shown the beneficial effects of addition of expansive additive for reducing the risk of autogenous shrinkage-introduced cracking. However, the research on hydration model of expansion additive has been hardly researched up to now. This paper presents a study of the hydration model of Ettringite-Gypsum type expansive additive. As a result of comparing forecast values with experiment value, proposed model is shown to expressible of hydration of expansive additive.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.578-584
• /
• 2021

This study comparatively analyzed the properties of hydration reaction and strength development of four types of pond ash(PA) and fly ash(FA), aiming for the effective use of PA. The PA whose chlorine content was highest due to the seawater movement method had a faster setting time, higher cumulative heat, and greater initial strength development than those of FA due to the acceleration of the cement hydration reaction. However, the activity factor increase rate decreased after seven days of curing due to the rapid generation of early hydrates. The PA that contained impurities, such as a large amount of unburned carbon, had a delayed setting time due to the lower hydration reaction. Moreover, the strength was degraded in all curing ages. The PA whose chlorine content was lower due to the freshwater movement method and the amorphous content exhibited similar hydration reactivity and strength development characteristics compared to that of FA. The thermogravimetric analysis results verified that it had a similar level of Ca(OH)₂ consumption and pozzolanic reactivity with that of FA. Conclusively, it is necessary to expand the application of the freshwater movement method and manage the ignition loss to raise PA's usability.