• Applied Chemistry for Engineering
• /
• v.28 no.3
• /
• pp.263-271
• /
• 2017

The application of mass spectrometry to polymer science has rapidly increased since the development of MALDI-TOF MS. This review summarizes current polymer analysis methods using MALDI-TOF MS, which has been extensively applied to analyze the average molecular weight of biopolymers and synthetic polymers. Polymer sequences have also been analyzed to reveal the structures and composition of monomers. In addition, the analysis of unknown end-groups and the determination of polymer concentrations are very important applications. Hyphenated techniques using MALDI-tandem MS have been used for the analysis of fragmentation patterns and end-groups, and also the combination of SEC and MALDI-TOF MS techniques is recommended for the analysis of complex polymers. Moreover, MALDI-TOF MS has been utilized for the observation of polymer degradation. Ion mobility MS, TOF-SIMS, and MALDI-TOF-imaging are also emerging technologies for polymer characterization because of their ability to automatically fractionate and localize polymer samples. The determination of polymer characteristics and their relation to the material properties is one of the most important demands for polymer scientists; the development of software and instrument for higher molecular mass range (> 100 kD) will increase the applications of MALDI-TOF MS for polymer scientists.

• Applied Microscopy
• /
• v.38 no.1
• /
• pp.29-34
• /
• 2008

Small amounts of zinc ions regulate a plentitude of enzymatic proteins, receptors and transcription factors, thus cells need accurate homeostasis of zinc ions. Some neurons have developed mechanisms to accumulate zinc in specific membrane compartment ("vesicular zinc"), which can be evidenced using histochemical techniques. These neurons are the socalled zinc enriched (ZEN) neurons, which accumulate glutamate and zinc inside their synaptic vesicles and release it during synaptic transmission. In the present paper we have studied the distribution of the ZEN terminals in the rat hippo-campus using ZnSe autometallography, Neo-Timm staining, ZnT3 immunohistochemistry and TSQ fluorescence staining.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.4
• /
• pp.29-37
• /
• 2007

To evaluate the effect of carbonization temperature of charcoal on the heavy metal adsorption property, Quercus mongolica wood and Larix kaempferi bark powder (100~60 mesh) were carbonized at between 400 and $900^{\circ}C$ at intervals of $100^{\circ}C$. In the properties of carbonized materials which affect the adsorption ability, pH increased with increasing the carbonization temperature, so that the pHs of wood and bark charcoal carbonized at $900^{\circ}C$ were 10.8 and 10.4, respectively. Also, in both materials, the carbon content ratio became larger as the carbonization temperature was raised. At the same carbonization temperature, carbon content ratio of the bark charcoal tended to be greater than that of the wood charcoal. In case of iodine adsorption which indicates the adsorption property in liquid phase, the wood charcoal showed higher adsorption value than the bark charcoal. From the investigation of adsorptive elimination properties of the charcoals against 15 ppm Cd, Zn, and Cu, the higher the carbonization temperature, the greater elimination ratio was. In comparison, the wood charcoal presented higher elimination ratio than that of the bark charcoal. In the wood charcoals carbonized at higher than $500^{\circ}C$, especially, 0.2 g of the charcoal was enough to eliminated almost 100% of the heavy metal ions. Heavy metal ion elimination ratio of the charcoals depended on the kinds of adsorbates. The effectiveness of adsorbates in adsorptive elimination by the charcoals were in order of Cu > Cd > Zn. This is because the physicochemical interaction between the adsorbate and adsorbent affects their adsorption properties, it is considered that subsequent researches are needed to improve the effectiveness of heavy metal adsorption by the charcoals.

• Applied Biological Chemistry
• /
• v.34 no.2
• /
• pp.168-173
• /
• 1991

The uptake of $Mn^{+2}$, a metal cofactor Mn-SOD, by rice seedings resulted in not only a substantial increase in SOD activity in leaf tissues of the plants, but also a significant enhancement of their cold tolerance : the relative extent of the cold tolerance appeared to accord with relative level of the SOD activity. In contrast, $Fe^{+3},\;Cu^{+2}$ and $Zn^{+2}$, which are the cofactors of Fe-SOD and Cu/Zn-SOD, were found to be ineffective for increasing the SOD activity as well as for improving the chilling-resistant capacity of the plants. The results suggest that Mn-SOD, which is most likely induced by its substrate(superoxide) and activated by the presence of $Mn^{+2}$a at high level, is the enzyme acting as an active component of the defense system against low temperature stress in rice plants. In addition, the application of abscisic acid which has been know to protect to some extent certain plants from chilling injury brought about an increase in SOD activity in rice tissues, providing another affirmative information for the crucial role of SOD under the circumstance of cold stress in plants.

• Analytical Science and Technology
• /
• v.11 no.3
• /
• pp.189-193
• /
• 1998

Binary alloys, $MoRu_3$ and $MoRh_3$, have been prepared using arc melting furnace. Mo and the noble metals Ru and Rh are the constituents of metallic insoluble residues, which were found in the early days of the post-irradiation studies on uranium oxide fuels. Detailed structural informations about these alloys have not been reported on JCPDS files of ICDD (International Centre for Diffraction Data). The results of X-ray diffraction study showed that the alloy was crystallized in hexagonal close-packing, well known as ${\varepsilon}$-phase. The X-ray diffraction patterns of these alloys matched well to that of $WRh_3$ with $P6_3/mmc$ of space group. The lattice parameters, a and c, were calculated using the least squares extrapolation. It was found from X-ray photoelectron spectroscopic measurements that Mo on the surface of the alloy was oxidized to Mo(6+), which could be removed by sputtering with Ar ions for approximately 15 minutes. The changes in binding energy of Mo, Ru, and Rh on the surface of the alloy were not observed. Magnetic susceptibility measurements resulted in the typical Pauli-paramagnetic behavior in the temperature range of 2 to 300 K.

• Journal of Conservation Science
• /
• v.33 no.5
• /
• pp.381-390
• /
• 2017

Desalination is the main focus of the stabilization of iron artifacts. However, drawbacks such as re-corrosion are noted due to the uncertainty in the elimination of the corrosive factors and artifacts. Several studies have been carried out on the effects of corrosion inhibitors to overcome these shortcomings. In this study, the effects of type 3 water treatment on corrosion inhibitors were investigated. Surfaces of samples that contained film corrosion inhibitors on their surfaces were analyzed. The results revealed that the surface rust was removed from the sample of type 1 No. 2 that was mainly composed of phosphate. The average weight reduction rates of re-corrosion samples were 0.58, 0.03, and 0.07% for type 1 No. 2, type 2 No. 2, and type 3 No. 2 respectively. The changes in the $Cl^-$ ion, a corrosive agent were found to be 28.60, -4.08, and -1.94 ppm for type 1 No. 2, type 2 No. 2, and type 3 No. 2 respectively. The water-treated films were analyzed by X-ray photoelectron spectroscopy (XPS). It was found that type 2 No. 2 had less Fe the basis metal, than that in type 3 No. 2 indicating much better film. Moreover, Si content was higher in type 2 No. 2, based on the silicate content, than in type 3 No. 2. They are speculated to be the reason or the formation of a better film. Type 1 No. 2, which is mainly composed of phosphate, would be inappropriate as a metal artifact conservation treatment. It was determined that type 2 No. 2 and type 3 No. 2 water treatments, which are mainly composed of silicate, provided excellent corrosion inhibiting effects. Corrosion inhibitors could be used as emergency treatment agents during the excavation of iron artifacts.

• Applied Biological Chemistry
• /
• v.35 no.1
• /
• pp.42-50
• /
• 1992

We conducted screening on Chinese medicinal herbs to examine their anti-complementary activity by hemolytic complementary assay $(TCH_{50})$. Among 55 kinds of herbs, several herbs showed relatively potent anti-complementary activity which decreased $TCH_{50}$, more than 70% in comparison with control. Then, hot water extracts of the following herbs, Curcuma aromatica, Areca catechu, Gleditsiae spina, Euonymus alata, Acanthopanax senticous. Lonicera japonica, Aconitum carmichaeli, Curcuma zedoaria and Cinnamoum cassia, which were shown relatively potent anti-complementary activity were partially purified and analyzed their chemical properties. These activities were resistant to digestion with pronase but decreased by treatment with $NaIO_4$. These results may indicate that the complement activating ability in their herbs is due to polysaccharide. Furthermore, the anti-complementary activity of Areca catechu which was showed the most potent activity, was reduced partially in the absence of the $Ca^{++}\;ion$. After incubation of the normal human serum with partially purified polysaccharide of A. catechu in the absence of $Ca^{++}\;ion$, a cleavage of C3 in the serum was found to have occurred through immunoelectrophoresis using rabbit anti-human C3 serum. These results indicate that the mode of complement activation by polysaccharide of A. catechu is via both the alternative and classical pathway.

• Journal of Life Science
• /
• v.25 no.7
• /
• pp.757-764
• /
• 2015

The immature fruit of Rubus coreanus Miquel (bokbunja in Korean) is mainly consumed as a fruit wine due to its sour taste and low sugar content. The lees (LBW) remaining after the production of bokbunja wine are discarded as they have no specific usage. The aim of this study was to develop high-value-added biomaterials for functional foods and beauty/health products by investigating the anti-microbial, anti-oxidant, and anti-thrombosis activities of LBW using ethanol and hot water extracts and their subsequent organic solvent fractions. The ethyl acetate (EA) fraction of LBW extracts has a high polyphenol content (413–459 mg/g), and showed strong anti-microbial activity against gram-positive bacteria. The EA fraction also showed excellent radical-scavenging activity against DPPH anion, ABTS cation, and nitrite, with strong reducing power. The polyphenol-enriched EA fraction strongly inhibited thrombin, prothrombin, and blood coagulation factors. The butanol fraction showed a specific inhibition of coagulation factors, as measured in activated partial thromboplastin time assay, which is linked to intrinsic blood coagulation. The butanol fraction also showed strong inhibition of platelet aggregation, at levels comparable to aspirin. The residue of the hot-water extract, which is produced by sequential solvent fractionation of the LBW extract, showed superior inhibition against platelet aggregation when compared to aspirin. Our results suggest that the LBW, which are currently discarded, are a promising source of novel functional foods and beauty/health products.

• Journal of the Korean Electrochemical Society
• /
• v.6 no.3
• /
• pp.169-173
• /
• 2003

Electrochemical capacitor made with metal oxide electrode uses rapid and reversible protonation/deprotonation of metal oxide material under the aqueous acidic solution, generally. Electrochemical stability window of aqueous electrolyte-type capacitor is narrow compared to that of organic electrolyte-type capacitor. Electrochemical characteristics of electrochemical capacitor made with metal oxide electrode and lithium or ammonium cation based organic electrolyte were evaluated. Electrochemical capacitor based on $RuO_2$ electrode material and 1M $LiPF_6$ in mixed solvents of EC, DEC, and EMC has anodic and cathodic specific capacitance of 145 and $142F/g-RuO_2{\cdot}nH_2O$, respectively, by using cyclic voltammetry with scan rate of 2mV/sec $g-RuO_2$ in potential range of $2.0\~4.2V(Li|Li^+))$.

• Nuclear Engineering and Technology
• /
• v.13 no.3
• /
• pp.145-152
• /
• 1981

Even though a lately reported method of high temperature exchange labelling of o-iodo-hippuric acid (Hippuran) in the absence of oxidizing agent was considered to be an attractive one, the exchange mechanism was somewhat unclear. In this study iodine isotope exchanges between o-iodohippuric acid (OIH) and radioiodide ($^{125}$ $I^{ }$) or between OIH and molecular radioiodine ($^{125}$ $I_2$) were carried out at two different temperatures. Rate constants and activation parameters were measured by applying a radio-paper chromatography technique. Since o-iodobenzoic acid is known as a by-product in the exchange labelling of OIH, data were also obtained for the OIB-iodide systems for comparison. The rate constant was increased in the order of OIB...$^{125}$ $I^{[-10]}$ >OIB...$^{125}$ $I_2$>OIH..$^{125}$ $I^{[-10]}$ >OIH...$^{125}$ $I_2$ and the activation parameters for OIH were generally larger than those for OIB :$\Delta$H$\neq$$_{OIH}$>$\Delta$H$\neq$$_{OIB}$, $\Delta$S$\neq$$_{OIH}$>$\Delta$S$\neq$$_{OIB}$. These results suggest that the mechanism of the high temperature exchange is predominantly nucleophilic even though some electrophilic character can also be involved depending upon reaction conditions. Such a fact may well be caused by a feasible formation of hydrogen bonding type transition state due probably to the ortho substituent effect of-CONHC $H_2$COOH. Thus, the high temperature exchange method is estimated to be quite effective for labelling Hippuran especially at a small research center where reducing agent-free $^{131}$ I is unavailable.ailable..