• Journal of the Korean Geotechnical Society
• /
• v.15 no.2
• /
• pp.105-127
• /
• 1999

Application of the soil nailing method is continuously extended in maintaining stable excavations and slopes. Occasionally, however, ground anchor support system may not be used because of space limitations in urban excavation sites nearby the existing structures. In this case, soil nailing system with relatively short length of nails could be efficiently adopted as an alternative method. The general soil nailing support system, however, may result in excessive deformations particularly in an excavation zone of the existing weak subsoils. Pretensioning the soil nails then, could play important roles in reducing deformations mainly in an upper part of the nailed-soil excavation system as well as improving local stability. In the present study, the analytical procedure and design technique are proposed to evaluate maximum pretension force and stability of the pretensioned soil nailing system. Also proposed are techniques to determine the required thickness of a shotcrete facing and to estimate probability of a failure against the punching shear. The predicted results are compared with the limited measurements obtained from the excavation site constructed by using the pretensioned soil nails. Based on the proposed procedure and technique, effects of the radius of a influence circle and dilatancy angle on the thickness of a shotcrete facing, bonded length and safety factors are analyzed. In addition, effects of the reduction of deformations expected by pretensioning of the soil nails are examined in detail throughout an illustrative example and FLAC$^{2D}$ program analysis.s.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.11
• /
• pp.1169-1174
• /
• 2015

Risk-Risk-based inspection (RBI) has been developed in order to identify risky equipments that can cause major accidents or damages in large-scale plants. This assessment evaluates the equipment's risk, categorizes their priorities based on risk level, and then determines the urgency of their maintenance or allocates maintenance resources. An earlier version of the risk-based assessment software is already installed within the equipment management system; however, the assessment is based on examination by an inspector, and the results can be influenced by his subjective judgment, rather than assessment being based on failure probability. Moreover, the system is housed within a server, which limits the inspector's work space and time, and such a system can be used only on site. In this paper, the development of independent risk-based assessment software is introduced; this software calculates the failure probability by an analytical method, and analyzes the field inspection results, as well as inspection effectiveness. It can also operate on site, since it can be installed on an independent platform, and has the ability to generate an I/O function for the field inspection results regarding the period for an optimum maintenance cycle. This program will provide useful information not only to the field users who are participating in maintenance, but also to the engineers who need to decide whether to extend the lifecycle of the power machinery or replace only specific components.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.813-818
• /
• 2020

Recently, with the rapid increase in technology and users of smart devices, the smart watch market has grown, and its utility and usability are continuously expanding. The strengths of smartwatches are wearable portability, application immediacy, data diversity and real-time capability. Despite these strengths, smartwatches have limitations such as battery limitations, display and user interface size limitations, and memory limitations. In addition, there is a need to supplement developers and standard devices, operating system standard models, and killer application modules. In particular, monitoring and application of user's biometric information is becoming a major service for smart watches. The biometric information of such a smart watch generates a large amount of data in real time. In order to advance the biometric information service, stable peer-to-peer transmission of sensing data to a remote smartphone or local server storage must be performed. We propose a synchronization method to ensure wireless remote peer-to-peer transmission stability in a smart watch system. We design a wireless peer-to-peer transmission process based on this synchronization method, analyze asynchronous transmission process and proposed synchronous transmission process, and propose a transmission efficiency method according to an increase in transmission amount.

• Journal of Information Technology and Architecture
• /
• v.10 no.4
• /
• pp.435-449
• /
• 2013

The performance of Enterprise Architecture (EA) in the Korea's public IT domain produces mixed results and responses. On the one hand, EA earns positive remarks and enthusiasm as a central government-wide IT governance framework with its significant IT budget saving records. At the same time, however, the response to EA at the department and agency level is tainted with disappointment, fatigue, and reluctance. This essay suggests that this is perhaps caused by the sterile lackluster concept of EA Business Architecture employed in the current EA practice of the enterprise. The possibility for liberating and reviving the concept of EA Business Architecture is explored. Various conceptual axes and branches of EA Business Architecture are identified based upon extensive EA field experience and observations, and discussions are made on how the concept of EA Business Architecture can be expanded and amplified on those conceptual axes and branched. The resulting EA Business Architecture conceptualization is consolidated into an illustrative typology for EA Business Architecture. In the end the theoretical and practical implications of the research are discussed along with its contribution and limitation.

• Journal of Korean Classical Literature and Education
• /
• no.37
• /
• pp.185-215
• /
• 2018

This paper tried to interpret new phenomenon in the narrative focusing on the tale. People telling about this story understood it in the way of recognizing and resigning the power of powerful destiny. This article poses a problem to that point. The male character begins the question "why?" And experiences a process of thoughtful thought. And he finds out his past life and pioneers his destiny. The find past life in this tale, it means 'an opportunity to choose oneself and life for themselves'. This can be interpreted as Samsara of Buddhism that does not insist on a fixed self. Experience of this process of reasoning according to narrative context of folktale will become literary therapy activity confirming the effectiveness of marital conflict narrative including the former motifs.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.6
• /
• pp.823-827
• /
• 2010

This study was conducted to assess the propriety of models for soil water characteristics estimation in anthropogenic soil through the measurement of soil water content and soil water matric potential. Soil profile was characterized with four different soil layers. Soil texture was loamy sand for the first soil layer (from soil surface to 30 cm soil depth), sand for the second (30~70 cm soil depth) and the third soil layers (70~120 cm soil depth), and sandy loam for the fourth soil layer (120 cm < soil depth). Soil water retention curve (SWRC), the relation between soil water content and soil water matric potential, took a similar trend between different layers except the layer of below 120 cm soil depth. The estimation of SWRC and air entry value was better in van Genuchten model by analytical method than in Brooks-Corey model with power function. Therefore, it could be concluded that van Genuchten model is more desirable than Brook-Corey model for estimating soil water characteristics of anthropogenic soil accumulated with saprolite.

• Environmental and Resource Economics Review
• /
• v.30 no.3
• /
• pp.365-393
• /
• 2021

Using the Choice Experiment Method, this paper identified whether subsidy to the household around landfil in Seoul metropolitan area is being provided corresponding to the scale of the environmental damage. Since 2001, the subsidy program has been operating for nearly 20 years to compensate for various environmental damage (foul odor, noise, air pollution, water pollution, etc.) from landfill site in the metropolitan area, but it is not clear on what ground the subsidy is allocated. This paper estimated the marginal WTP by attribute (odor, noise, air pollution, and water pollution) based on mixed logit model and compared them with current subsidy level per household in each town. As a result of the comparison, it was found that the subsidy for each town was not allocated in proportion to the amount of the marginal WTP for each household in the corresponding town. In addition, this paper constructs a level-by-level scenario for environmental improvement attributes and compares economic benefits and current subsidy levels. As a result, the current subsidy level is insufficient compared to the level at which environmental damage is completely eliminated, but excessive subsidy is allocated compared to partial improvement levels.

• Korea Science and Art Forum
• /
• v.37 no.2
• /
• pp.101-112
• /
• 2019

Regardless of the size, the role and meaning of the space required for human daily life are the same. Especially, as the spatial design is small and the size is small, the careful design and problem solving are needed to enable comfortable and convenient life even in a narrow space. The purpose of this study is to design a convergence model that utilizes the advantages of BIM, which can simulate actual design based on a new one-person housing space design plan optimized for one person. This study applied the BIM design technology to one-person housing 2D design, and the suitability examination and the space optimization design of the interior design were carried out. As a result of the study, utility of space improvement, consideration of housing environment, interference check, application of eco-friendly housing system, and MEP design item were derived. Therefore, BIM space design in interior space has been confirmed as a way to overcome limit and inefficiency of 2D design which is applied to actual space by various space design elements. Based on the results of this study, the One-person housing space model, which is applied to the study, is a pure creation designed based on various one-person housing of social and cultural peculiarities derived from previous research. This design example was applied to BIM technology to confirm the detailed and practical design possibility.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.12
• /
• pp.907-914
• /
• 2018

Wireless charging has been actively researched and popularized owing to the potential convenience of being able to charge electronic devices without wires for users. However, the receiver on the wireless charging pad is not charged when the center of the receiver is misaligned; thus, the center of the receiver must be adjusted well. This misalignment may greatly reduce the convenience of wireless charging. To overcome this limitation of wireless charging, a coil is designed to improve the positional freedom of the receiver. The positional freedom of the Rx coil is improved when the outer diameter of Tx coil is larger than when Rx and Tx coils are almost the same size. When the Tx coil has a larger outer diameter than that of the Rx coil, the efficiency at the center is somewhat lowered, but the efficiency is improved compared to when the center is out of order. In this paper, a double coil structure having an outer and an inner coil is proposed. The double coil structure further improves the efficiency, compared with one coil with the same outer size. The simulation and measurement results demonstrated that the tendency was consistent, and it was verified that the degree of freedom of the Rx coil is improved by adding the inner coil, while the size of the outer coil was the same. The measurement shows that the transmission efficiency of the conventional Tx coil is 37 %, the larger outer diameter coil is 45 %, and double coil is 47 % when the distance of the Tx/Rx coil is 3 mm, the misalignment is 15 mm and current flowing in the Rx coil is 1 A at an operating frequency of 105 to 210 kHz.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.4
• /
• pp.96-111
• /
• 2009

This essay is a study aimed at rationality and utility of two terms, 'Nongak' and 'Pungmul'. I examined how the terms have been today, by diachrony based on review of historical material. I tried to secure the historical context and basis about my argument, quoting many historical material from Korea Dynasty period, Joseon Dynasty period and the colonial period of the imperial Japan during 1910-45 to today. I examined many objective arguments about the 'Nongak', and pointed out the mistake of the objective argument. And I examined the means and rationality of the terms, 'Nongak', 'Pungmul', 'Pungmulgut', 'Pungmulnory'. The 'Pungmul' has been used as the means of instrument for a long time from Joseon Dynasty period. It is only rational using as the means of instrument but as the means of Performance of Nongak considering the historical legitimacy. The 'Pungmul' is Sino-Korean word, not korean native letter. The Pungmulgut means the 'ritual by Pungmul', so it can be recognized the rationality, but have a weak point that it is a neologism being made by some intellectuals in 1980s. In addition to, it is not used im performing field. 'Pungmulnory' has a limit to call the Nongak as a synthetic art. 'Nongak'means a synthetic art that farmers who were absolute majority in agrarian society of Korea have made and developed. So I conclude that 'Nongak'is the best rational term.