• Geotechnical Engineering
• /
• v.14 no.6
• /
• pp.33-44
• /
• 1998

Preliminary study has been conducted to analyse the co-relation between shallow landslides frequently occurring in rainy seasons and the water infiltration into the slope. The change of stress state due to partial saturation of a soil and hence the reduction of its shear strength have been reviewed. The variation of the safety factor of an infinite planar slope in accordance with various water infiltration scenarios has been estimated by limit equilibrium method to explain the mechanism of shallow slope failure. Numerical analysis under the same condition as those of some models dealt with in the previous method has been carried out by using FLAC, a finite difference program, and the results have been compared with the ones obtained by limit equilibrium method. Both results proved to be identical, which implies the ability of the numerical approach to the problems related to the stability analysis of unsaturated slope with the irregular geometry. Further improvement, however, should be made to apply the present analysis procedure to general slopes since it deals with a simple one.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.5
• /
• pp.26-33
• /
• 2002

The design method of robust $H_{\infty}$ filtering for discrete-time uncertain linear systems is investigated in this paper. The uncertain parameters are assumed to be unknown but belonging to known convex compact set of polytope type. The objective is to design a stable robust $H_{\infty}$ filter guaranteeing the asymptotic stability of filtering error dynamics and present an $L_2$ induced norm bound analytically for the modified $H_{\infty}$ performance measure. The sufficient condition for the existence of robust $H_{\infty}$ filter and the filter design method are established by LMI(linear matrix inequality) approach, which can be solved efficiently by convex optimization. The proposed algorithm is checked through an example.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.2
• /
• pp.179-186
• /
• 2012

In the automobile industry, reducing the weight is the most important objective for reducing air pollution and improving the fuel efficiency. For this reason, the application of aluminum sheets is increasing. When the sheets are applied to the automobile, using inappropriate variables for the material, product design, and press processing can generate tearing, wrinkling, and spring-back problems, which are the main types of failure in the manufacturing process. Therefore, it is necessary to reduce these failures by harmonizing the many variables and strictly managing the processes. In this research, we study the theoretical plasticity instability of Al5454 and obtain the forming limit diagram (FLD) using MATLAB. Moreover, we compare the theoretical FLD with an experimental FLD obtained from a stretching test.

• Clean Technology
• /
• v.17 no.4
• /
• pp.363-369
• /
• 2011

To evaluate the feasibility of electrodialysis for ammonia nitrogen removal from wastewater, the effects of operating parameters such as diluate concentration, applied voltage and flow rate on the removal of ammonia nitrogen were experimentally estimated. The removal rate was evaluated by measuring the elapsed time for ammonia nitrogen concentration of diluate to reach 20 mg/L. Limiting current density (LCD) linearly increased with ammonia nitrogen concentration and flow rate. The elapsed time was linearly proportional to initial concentration of diluate. Due to relatively large equivalent ion conductivity and ion mobility of ammonia nitrogen, the removal rate increased consistently with flow rate. Increase in the applied voltage gave positive effect to removal rate. From the operation of the electrodialysis module used in this research, the flow rate of 3.2 L/min and 80~90% of applied voltage for LCD are recommended as the optimum operating condition for the removal from high concentrate ammonia nitrogen solution.

• Journal of the Korean Chemical Society
• /
• v.17 no.5
• /
• pp.378-384
• /
• 1973

To investigate the mechanism of the reaction of electrolytic oxidation of iodide to iodate ions, polarization curves are determined in various kinds of solution using electrodeposited lead peroxide and platinum anodes. It was observed from the polarization curves that the limiting current is exists at concentration 1.5 M of potassium iodide, and these limiting current disappeared as potassium hydroxide was added up to concentration of 0.1 M. while in case of platinum anode, limiting current did not appear in dilute potassium iodide solution. These results are owing to the chemical reaction, $PbO_2+2I^{-}+2H^+{\to}PbO+I_2+H_{2}O$ ocurring at the surface of lead peroxide anode. Also, we studied to obtain the optimum conditions of electrolytic preparation of iodate from iodide solution using a cell without the diaphragm. The results are that; (a) addition of potassium dichromate at the anti-reducing agent is proper in concentration of 0.1 g/l, (b) electrolytic temperature is not so much effective in raising the current efficiency, (c) current efficiency is increased with current density, and (d) electrolysis is the most effective in weak alkaline solutions.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.2
• /
• pp.17-28
• /
• 2015

In this paper, it is accomplished to design a control method for such an actuation system of simplified ON/OFF mechanism with actuation command limit. First of all, based on experimental data, the modeling works for nonlinear/linear actuation dynamics are performed, which are govern by PWM command as a control input. Using the linearized model, a classical PI control method is designed to satisfy the aimed control performance requirements, and a control algorithm is proposed to realize the required control performance in the effective control region through resolving the issue for the PWM command limit which reduces the control performance. Finally, through control simulations, the design method is verified and the corresponding control performance improvement is evaluated.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.2
• /
• pp.172-178
• /
• 2014

This study suggests the minimum critical external forces based on the assessment of anchoring safety to single anchor situation for representative 8 number of ships in E-group anchorage of Ulsan port. Assessment of anchoring safety is compared holding powers of anchor with external forces of wind, wave and current. Holding powers was reflected materials of seabed, equipment numbers regarding anchor and chain weight, also external forces acting on a hull was calculated considering projected wind area and wetted surface area to the full and ballast conditions respectively. The results of anchoring safety assessments to single anchor showed that the minimum criteria of dragging anchor is a little different from ship's type, size and loading conditions. Bulk carrier can be dragged over the 15m/s of winds and Tanker can be dragged over the 13m/s of winds in case of less than 2knots of currents speed.

• Geotechnical Engineering
• /
• v.9 no.4
• /
• pp.37-44
• /
• 1993

Model pile tests in calibration chamber are performed in order to study the two factors that the pile bearing capacity is significantly influenced by. Those factors are the critical depth concept and the scale effect caused by pile diameters. Firstly, the predicted values of end bearing capacity from the various static formulae were compared with the measured ones from model pile tests. Secondly, the critical depth concept and the scale effect were investigated by using two different soil conditions in a series of calibration chamber tests : the one is uniform sand : and the other is weathered granites overlayered by sand. Main results obtained from the model tests can be summarized as follows : (1) The end bearing capacity was increased with pile penetration depth up to penetration ratio of 7 to 8 when the cell pressure is high, and the critical depth was observed in the current chamber tests with uniform sand layer , (2) The predicted end bearing capacities were mostly lager than the measured, and it was found that the differences between the predicted and the measured values became smaller as the pile penetration ratio was increased : (3) The end bearing capacity of the small diameter pile in weathered granites layer was mostly less than that of the larger pile, while in uniform sand layer it was vice.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.668-668
• /
• 2012

제방 비탈면 보호방법 중에서 식생매트를 사용하는 방법은 제방의 보호와 함께 자연친화적이면서 생태계의 보전 측면에서 유리하고 이와 아울러 심미적 효과와 비용의 적절성 등의 요건을 만족하기 때문에 최근 국내 자연형 하천정비에서는 다양한 종류의 식생매트들이 빈번히 사용되고 있다. 하지만 식생매트로 인한 제방의 비탈면 보호 효과에 대해서는 아직까지 정성적으로 분석된 예가 미흡하여 이에 관한 연구가 시급히 요구되고 있는 실정이다. 비탈면을 보호하는 비탈덮기는 생태계와 경관 등의 고려도 중요하지만 그보다 먼저 유수에 의한 파괴가 발생하지 않아야 한다. 따라서 제방의 비탈면 보호 효과가 다른 재료에 비해 상대적으로 취약할 수 밖에 없는 식생매트의 경우 적용범위와 한계를 명확히 하여야 잘못된 적용으로 인한 재해를 막을수 있을 것이다. 근래 들어 지역을 가리지 않는 국지성 폭우로 인한 홍수가 점차로 확대되고 있는 국내 상황을 고려할 때에도 식생매트의 한계와 적용범위의 결정은 매우 중요하다. 본 연구에서는 한국건설기술연구원 안동 하천실험센터 호안블록 시험구간에서 하류 10m 지점에서 시작하는 20m 구간에 두 종류의 식생매트를 교대로 설치하여 각각의 식생매트에 관한 파괴실험을 수행하였다. 두 종류의 식생매트 모두 코코넛 섬유를 원료로 사용하는 제품이며, 식생매트의 파괴 실험은 식생활착 이전의 상황을 재현하여 수행하였다. 이는 통상적으로 식생 활착 이전의 식생매트가 제방 비탈면을 보호하는 효과가 현저히 떨어지는 단점을 가지고 있기 때문에 이에 맞추어 본 실험에서는 식생매트의 자체의 단점과 한계를 파악하는 것을 목적으로 하였다. 실험 결과 두 종류의 식생매트는 모두 침수시 부력으로 인한 부유 현상과 식생매트 틈세 흐름으로 인한 기반층의 세굴 현상을 발견할 수 있었으며, 이러한 상황에서 식생매트를 고정하는 앵커가 매우 중요한 역할을 한다는 것을 발견할 수 있었다. 식생매트가 기반 토층에서 분리되어 파괴가 발생하는 유량조건은 각각 식생매트에 따라 서로 다르게 나타났는데, 이 또한 매트를 고정하는 앵커의 특성 때문인 것으로 판단된다.

• Clean Technology
• /
• v.15 no.4
• /
• pp.280-286
• /
• 2009

To evaluate the feasibility of electrodialysis for nitrate-nitrogen removal from wastewater, the effect of operating parameters on the removal of nitrate-nitrogen was experimentally estimated. The limiting current density (LCD) linearly increased with the nitrate concentration and the flow rate. The time when the nitrate concentration of diluate reached at 20 mg/L was linearly proportional to concentration of diluate, and the concentration of concentrate did not affect the removal rate. Increase in the flow rate gave a positive effect on the removal rate and became insignificant at How rates greater than 1.6 L/min. The removal rate increased with the applied voltage, but the increment in the removal rate decreased as the applied voltage approached the LCD. From the operation of the electrodialysis module used in this research, the flow rate of 1.6 L/min and the voltage corresponding to the 80~90% of LCD were found be the optimum operating condition for the nitrate removal from highly concentrated nitrate-nitrogen solutions.