• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.297-297
• /
• 2023

최근 친수성, 경관, 생태계 보전 등을 위해 다양한 호안블록의 시공이 이루어지고 있어 호안블록의 수리적 안정성에 관한 관심이 증가하고 있다. 이러한 배경 하에 한국건설기술연구원 안동하천실험센터(이하 센터)에서는 2019년부터 실규모 수로를 이용하여 여러 건의 호안블록 실규모 수리검토 실험을 실시한 바 있다. 본 연구는 그간의 실험 결과를 종합적으로 고찰하고 수리 검토 실험의 현황과 한계점, 그리고 개선 방향을 제언하는데 그 목적이 있다. A1 수로(급경사수로, 하상경사 1/70)에서는 7건(21회), B1 수로(고유속수로, 하상경사 1/7)에서는 2건(6회)의 실험이 수행되었다. A1 수로 실험의 유량-소류력 관계는 1.0 m³/s에서 약 20 N/m²이며, 1.0 m³/s 증가당 약 11 N/m²이 증가하는 관계를 나타낸다. 7건의 실험 결과 30분 이상 지속된 최대 실험 유량은 6~7 m³/s 정도이며, 이는 A1 최대 공급 유량의 75 % 정도로서 안정적인 수준이라고 판단된다. 이 때의 최대 소류력은 75 N/m² 정도로 나타났다. B1 수로는 5 m/s 이상의 고유속 흐름을 발생시킬 수있으며, 2건의 실험 결과 0.5 m³/s에서 약 100 N/m², 최대 4.5 m³/s에서 330 N/m²까지 소류력을 제공하여 실험을 수행한 바 있다. 따라서 A1, B1 수로를 통해 제공할 수 있는 소류력 범위는 10~330 N/m²이지만, 75~100 N/m²는 실험에서 제공된 바 없었다. 한편, 토양유실의 경우 수준측량에 의해 측정되는데, 대부분의 실험에서 Clopper의 토양손실 지수(1.27 cm) 미만의 결과가 발생하였다. 이는 시험체에 따라 여건이 다르기는 하지만, 수리 검토 실험시 3회 실험을 기본으로 하고 있고 호안재료의 침식이 기준 이하로 유지되면서 최대한의 성능을 발휘할 수 있는 소류력 조건을 얻으려는 실험 목적에 부합하도록 조절된 것으로 볼 수 있다. 이러한 실험 결과를 토대로 고려해볼 수 있는 개선 방향은 다음과 같다. 강성 재료가 아닌 연성 또는 친환경적 호안재료의 허용 소류력 범위를 보다 넓게 평가하기 위해 A1 수로가 제공하는 최대 소류력을 높일 필요가 있다. 이를 위해 기본 3회의 실험 외에 추가로 호안블록이 파괴되거나 토양유실 임계치를 초과할 수 있는 실험을 수행함으로써 각 제품의 한계 성능을 평가하는 것이 필요할 것으로 보인다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.5
• /
• pp.357-371
• /
• 2023

In cable tunnel construction using TBM, the vertical shaft is an essential structure for entrance and exit of TBM equipment and power lines. Since a shaft penetrates the ground vertically, it often encounters rock mass. Blasting or rock splitting methods, which are mainly used to the rock excavation, cause public complaints due to the noise, vibration and road occupation. Therefore, mechanical excavation using vertical shaft excavation machine are considered as an alternative to the conventional methods. However, at the current level of technology, the vertical excavation machine has limitation in its performance when applied for high strength rock with a compressive strength of more than 120 MPa. In this study, the potential utilization of waterjet technology as an excavation assistance method was investigated to improve mechanical excavation performance in the hard rock formations. Rock cutting experiments were conducted to verify the cutting performance of the abrasive waterjet. Based on the experimental result, it was found that ensuring excavation performance with respect to changing in ground conditions can be achieved by adjusting waterjet parameters such as standoff distance, traverse speed and water pressure. In addition, based on the relationship between excavation performance, uniaxial compressive strength and RQD, it was suggested that excavation performance could be improved by artificially creating joints using the abrasive waterjet. It is expected that these research results can be utilized as fundamental data for the introduction of vertical shaft excavation machines in the future.

• Geophysics and Geophysical Exploration
• /
• v.26 no.3
• /
• pp.114-125
• /
• 2023

The physics-informed neural network (PINN) has been proposed to overcome the limitations of various numerical methods used to solve partial differential equations (PDEs) and the drawbacks of purely data-driven machine learning. The PINN directly applies PDEs to the construction of the loss function, introducing physical constraints to machine learning training. This technique can also be applied to wave equation modeling. However, to solve the wave equation using the PINN, second-order differentiations with respect to input data must be performed during neural network training, and the resulting wavefields contain complex dynamical phenomena, requiring careful strategies. This tutorial elucidates the fundamental concepts of the PINN and discusses considerations for wave equation modeling using the PINN approach. These considerations include spatial coordinate normalization, the selection of activation functions, and strategies for incorporating physics loss. Our experimental results demonstrated that normalizing the spatial coordinates of the training data leads to a more accurate reflection of initial conditions in neural network training for wave equation modeling. Furthermore, the characteristics of various functions were compared to select an appropriate activation function for wavefield prediction using neural networks. These comparisons focused on their differentiation with respect to input data and their convergence properties. Finally, the results of two scenarios for incorporating physics loss into the loss function during neural network training were compared. Through numerical experiments, a curriculum-based learning strategy, applying physics loss after the initial training steps, was more effective than utilizing physics loss from the early training steps. In addition, the effectiveness of the PINN technique was confirmed by comparing these results with those of training without any use of physics loss.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.2
• /
• pp.141-155
• /
• 2023

Monitoring technology based on electrical resistivity is widely used for non-destructive data collection and health analysis of underground structures and tunnels. Vulnerable sections such as fault zone generates many problems during construction of the tunnel. These problems cause displacement and stress changes of the ground. Therefore, it is necessary to predict the state of the fault zone section to ensure the mechanical stability of the underground structure. Monitoring the size of joints and the porosity of the fillings is essential for rocks. Previous studies have not considered the variety of fillings in rock joints. In this study, electrical resistivity tests were conducted according to the particle mixing state of the sandy fillings. When the size of fillings is decreased at the constant porosity, the electrical resistivity tends to increase. The results of this study are expected to be useful as basic electrical resistivity data for predicting the ground conditions and evaluation of the ground behavior that is containing sandy fillings in the rock joint for tunnels.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.26 no.1
• /
• pp.69-88
• /
• 2023

Efficient spatial planning is one of the necessary factors to successfully respond to climate change. And researchers often use LULC(Land-Use/Cover) data to conduct land use and spatial planning research. However, LULC data has a limited number of grades related to urban surface, so each different urban structure appearing in several cities is not easily analyzed with existing land cover products. This limitation of land cover data seems to be overcome through LCZ(Local Climate Zone) data used in the urban heat island field. Therefore, this study aims to first discuss whether LCZ data can be applied not only to urban heat island fields but also to other fields, and secondly, whether LCZ data still have problems with existing LULC data. Research methodology is largely divided into two categories. First, through literature review, studies in the fields of climate, land use, and urban spatial structure related to LCZ are synthesized to analyze what research LCZ data is currently being used, and how it can be applied and utilized in the fields of land use and urban spatial structure. Next, the GIS spatial analysis methodology is used to analyze whether LCZ still has several errors that are found in the LULC.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.11
• /
• pp.89-99
• /
• 2006

The PCRW (Precast Concrete Retaining Wall) has many advantages compared with cast in place concrete retaining wall : shorter construction period, excellency of quality and minimum interference with the adjacent structure and traffics. However, shallow foundation type of PCRW, which has comparatively better ground condition, has some disadvantages such as difficulty in transportation and higher cost due to the size of PCRW being expanded by resisting only with self-weight if there is no other supplementary reinforcement. The presented study, in order to complement such disadvantages of PCRW, have applied the micropile method. The micropile method has advantages like low-cost and high-efficiency and does not require huge space, because it can be executed with small size equipment. However, the mechanical behavior characteristics of the PCRW reinforced by micropile, which is installed to improve the reinforcement effect, is not yet clearly identified and there is no suggested standard as to the length, diameter, install angle and install position of micropiles. Hence, this method is yet being designed depend on engineer's experience. In this study, various laboratory model tests as to sliding and overturning were performed in order to identify and present the optimum type of reinforcement and reinforcement effect of the PCRW reinforced by micropiles. In addition, it also executed numerical analysis for the purpose of verifying the optimum type of reinforcement for micropiles based on the results of laboratory model tests. The optimum reinforcement type of micropiles was estimated by model test and numerical analysis. The length of micropiles is 0.4 times wall height and the diameter is 0.04 times wall length.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.6
• /
• pp.97-102
• /
• 2007

Though the stability analysis of soil slopes widely employs the limit equilibrium method, the study on the jointed rock slopes must consider the direction of joint and the characteristics of Joint at the same time. This study analyzes the result of the change in the factors which show the characteristics of discontinuity and the shape factor of rock slopes, and so on, in an attempt to validate the propriety as to the interpretation of jointed rock slope stability which uses the general finite element program. First, the difference depending on the flow rules was compared, and the factor effect study was conducted. The selected independent variables included the direction of joint which displays the mechanical characteristics of discontinuity, adhesive cohesion, friction angle, the inclination and height of rock slope which reveal the shape of slope and surcharge load. And the horizontal displacement was numerically interpreted at the 1/3 point below the slope, a dependent variable, to compare the relative degree of factor effects. The findings of study on factor effects led to the validation that the result of horizontal displacement for each factor satisfied various engineering characteristics, making it possible to be applied to stability interpretation of jointed rock slope. A modelling is possible, which considers the application of the result of real geotechnical surveys & laboratory studies and the non-linear characteristics when designing the rock slope. In addition, the stress change which may result from the natural disaster, such as precipitation, and the construction, can be expressed. Furthermore, as the complicated rock condition and the ground supporting effect can be considered through FEM, it is considered to be very useful in making an engineering decision on the cut-slope, reinforcement and so on.

• Journal of the Korean Institute of Gas
• /
• v.27 no.1
• /
• pp.70-77
• /
• 2023

Air environment regulations have been strengthened due to increasing air pollutant emissions, the target of reducing emissions has increased and interest in gas measurement methods is also increasing. The sampling method is mainly used, but due to the spatial and temporal measurement limitations, the laser absorption spectroscopy which is a real-time and in-situ method is in the spotlight. In this study, we studied the wavelength modulation spectroscopy and described the calibration-free algorithm. The developed algorithm was modified to reflect 46 multi-absorption lines and was applied to light absorption signal analysis in visible and mid-infrared regions. In addition, the difference between the modulation parameters of laser was analyzed. As a result of reviewing the performance through O₂ and NO gas measurement experiments of various concentration conditions, the linearity was R²_O2=0.99999 and R²_NO=0.99967.

• Tunnel and Underground Space
• /
• v.33 no.3
• /
• pp.141-149
• /
• 2023

Recently, as the demand for urban underground space increases, urban tunnel planning is actively progressing. In particular, the application of the roadheader excavation method, which has favorable applicability to urban tunnel, is increasing. However, it is known that the roadheader excavation method has a limitation in that excavation efficiency for high strength rock with a Uniaxial Compressive Strength (UCS) of 100 MPa or more is lowered. In this study, The pre-cracked method was presented as a method to improve the excavation efficiency of roadheader for high strength rock and its applicability was evaluated. The net cutting rate was evaluated using the Bilgin prediction formula, which can calculate the net cutting rate by considering the UCS and RQD (Rock Quality Designation). It was found that the net cutting rate increased as the RQD decreased under the rock condition with the same UCS. This is judged to increase the excavation efficiency of the roadheader in the jointed high strength rock. Additionally, the field applicability of the pre-cracked method for high strength rock was verified through field tests. It was confirmed that the crack zone was formed around the charging hole, and it is considered that the pre-cracked method can be applied to the high strength rock.

• Journal of Christian Education in Korea
• /
• v.72
• /
• pp.317-339
• /
• 2022

The purpose of this study is to develop liberal arts subjects for humanity education in Christian universities. Christian universities need to attempt Christian humanity education through Christian educational interpretation of humanity. This study defines the humanity not character or personality but rather humanity. Humanity is starting from an understanding of human conditions. And it is a perspective toward oneself and others based on human ontological questions and life style. Human is a being with developmental crises and are marginal being with existential anxiety. Therefore, humanity education of Christian universities should be a place to face the void of finite humans in order to understand what kind of existence they are and to transform their epistemology to understand self and the world. Christian humanity education will be realized by two approaches. The first is a theoria approach that extends from a two-dimensional understanding of the self and experienced reality to the speculative and introspective pursuit of the ultimate truth, The second is a praxis approach that consist of the interaction of reflection to human's act and reflective behavior. Therefore, this study develops a subject focused on a speculative and reflective understanding of humanity as an case of a liberal arts subject for humanity education in a Christian university, and a subject focusing on the understanding of reflexively participating in the actual social situation, which is the context of humanity.