• Journal of the Korean Society of Propulsion Engineers
• /
• 제22권1호
• /
• pp.28-35
• /
• 2018

In order to analyze the flammability limit and structure of the gaseous methane-gaseous oxygen diffusion flame formed through a shear coaxial injector, combustion experiments were carried out according to the condition of injector recess and propellant mass-flow rate. As a result, it was confirmed that stable anchored flame was observed even at the high oxygen Reynolds number as the propellant momentum flux ratio increased, and that the recess had no significant influence on the flame shape and flammability limit. The anchored flame visualized through a chemiluminescence showed the maximum OH radical emission intensity at a specific position, irrespective of the propellant injection condition, and the radical intensity was greatly reduced by the injector recess.

• The Korean Journal of Archival Studies
• /
• 제24호
• /
• pp.41-71
• /
• 2010

Reappraisal is a process to examine the past appraisal decision. The reappraisal theory is based on two facts: first, appraisal decision can not be always correct, second, the archival value is changed by time. So, reappraisal policy should complement the limit of the first appraisal results, which is based on the function analysis. To achieve this goal, it is needed to use different process and methods from the first appraisal. However, existing reappraisal system does not meet the essential purpose of reappraisal. This article examined the limit of the reappraisal policy. To complement the problems, this article set a direction and suggested the subject-based reappraisal. The aim of this study is to present the methods to document the society of the generation.

• Journal of Korea Water Resources Association
• /
• 제55권12호
• /
• pp.1125-1135
• /
• 2022

Damages by heavy snow does not occur very often, but when it does, it causes damage to a wide area. To mitigate snow damage, it is necessary to know, in advance, the depth of snow that causes damage in each region. However, snow depths are measured at observatory locations, and it is difficult to understand the spatial distribution of snow depth that causes damage in a region. To understand the spatial distribution of snow depth, the point measurements are interpolated. However, estimating spatial distribution of snow depth is not easy when the number of measured snow depth is small and topographical characteristics such as altitude are not similar. To overcome this limit, satellite images such as Synthetic Aperture Radar (SAR) can be analyzed using Differential Interferometric SAR (DInSAR) method. DInSAR uses two different SAR images measured at two different times, and is generally used to track minor changes in topography. In this study, the spatial distribution of snow depth was estimated by DInSAR analysis using dual polarimetric IW mode C-band SAR data of Sentinel-1B satellite operated by the European Space Agency (ESA). In addition, snow depth was estimated using geostationary satellite Chollian-2 (GK-2A) to compare with the snow depth from DInSAR method. As a result, the accuracy of snow cover estimation in terms with grids was about 0.92% for DInSAR and about 0.71% for GK-2A, indicating high applicability of DInSAR method. Although there were cases of overestimation of the snow depth, sufficient information was provided for estimating the spatial distribution of the snow depth. And this will be helpful in understanding regional damage-causing snow depth.

• Korean Journal of Plant Taxonomy
• /
• 제40권4호
• /
• pp.226-233
• /
• 2010

An intensive study of the embryology of Gymnospermium microrrhynchum was conducted to provide information regarding a discussion of the phylogenetic relationships of the genus, which is yet unstudied. Our results indicated that Gymnospermium is similar to other genera of Berberidaceae in terms of its embryological features. Nevertheless, newly reported and unique features are the well-developed endothelium and the undifferentiated seed coat type. Until the study of Gymnospermium, it may have been considered to be closer to Caulophyllum and Leontice in the tribe Leonticeae. These three genera share many morphological features as well as molecular similarities, by which they are kept in the same tribe, Leonticeae. However, very little detailed embryological data regarding these genera have been published thus far. Gymnospermium was characterized according to the basic type of anther wall formation as well as its glandular tapetum, successive cytokinesis in the microspore mother cell, two-celled mature pollen grains, anatropous and crassinucellate ovules with a nucellar cap, well-developed endothelium, its Polygonum type of embryo sac formation, its nuclear type of endosperm formation, and its undifferentiated seed coat type. In comparison with Nandina, there are many differences, such as the dehiscence of the anther, the cytokinesis in the microspore mother cells, the shape of the megaspore dyad, and the seed characteristics. Although we had no available detailed embryological information regarding Caulophyllum and Leontice, which are genera that are more closely related to Gymnospermium, we could deduce from the phylogenetic relationship that Gymnospermium, Caulophyllum, and Leontice are more closely related to each other than other genera of Berberidaceae on the basis of the seed characteristics.

• The korean journal of orthodontics
• /
• 제30권1호
• /
• pp.115-126
• /
• 2000

Dental arch expansion is one of the method used to solve the dental crowding problem by non-extraction. Many formulae using tooth size have been suggested to predict ideal inter-premolar and inter-molar width. The purpose of this study was to evaluate the adequacy of some upper dental arch width prediction methods, namely Pont's method, Schmuth's method and Cha's method. The sample consisted of the casts of 119 Korean young adults who had no muscular abnormality, no skeletal discrepancy, and Angle's Class I molar relationships. Measurements were obtained directly from plaster casts; they Included mesiodistal crown diameters of the four maxillary incisors, as well as maxillary inter-first-premolar and inter-first-molar arch widths as specified by Pont. The correlation coefficients between the sum of incisors(SI) and upper dental arch width were calculated. The differences between predicted width and actual width were classified as overestimated, properestimated, and underestimated. The data obtained from each group were analyzed for statistical differences. The results were as follows : 1. Upper dental arch width indices were calculated from SI in normal occlusion (81.96 : premolar index, 62.55 : molar index). 2. Low correlations between SI and arch width were noted in normal occlusion (0.50 in the inter-premolar width, 0.39 in the inter-molar width). 3. Pont's formula and Schmuth's formula tended to overestimate the inter-premolar width. A more even distribution of estimates was noted in Cha's fomula. 4. Cases within $\pm$1 mm range of observed inter-premolar width were $45\%$ in the Cha's formula, $40\%$ in the Pont's formula, and $39\%$ in the Schmuth's formula. 5. All formulae had a tendency to underestimate the inter-molar width, but Cha's formula had better predictability than others. 6. Cases within $\pm$1 mm range of observed inter-molar width were $40\%$ in the Cha's formula, $29\%$ in the Pont's formula, and $13\%$ of Schmuth's formula. The data presented in this study does not support the clinical usefulness of ideal arch width prediction methods using the mesiodistal width of maxillary incisors.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 한국식품저장유통학회 2003년도 춘계총회 및 제22차 학술발표회
• /
• pp.142.2-142
• /
• 2003

본 연구에서는 풋고추, 대파와 깻잎에 물리적인 장해를 주지 않고 저장성을 향상시킬 수 있는 열처리 조건을 설정하고, 열처리한 채소의 MAP에 적합한 포장재를 검색하기 위한 실험을 수행하였다. 대파를 55$^{\circ}C$ 온수에서 1분 침지하고, 풋고추와 깻잎은 5$0^{\circ}C$ 온수에서 10초와 5초 각각 침지하면 저장 중 관능적 품질이 비열처리한 대조구보다 우수하게 나타났다. 열처리한 채소의 호흡속도는 비열처리 채소에 비하여 30~45%정도 상승하였다. 열처리 채소의 MAP에 적합한 포장재를 검색하기 위하여 기체 투과도가 서로 다른 포장재 LDPE, CPP, PD900, MPD2055, SM60에 열처리한 채소를 포장한 후 1$0^{\circ}C$에서 4주간 저장을 하였다. 포장 표면에 5mm의 구멍을 뚫은 대조구와 핀홀이 있는 SM60은 저장 2주 이후 부터 중량감소가 심하게 일어났다. 깻잎은 포장내부의 $CO_2$ 농도가 높게 유지되는 CPP에 포장할 때, 저장 2주부터 $CO_2$ 장해로 인하여 표면의 갈변과 연화가 심하게 일어났으며, 풋고추는 저장 3주부터 표면의 색상이 약간 붉은 색을 나타내기 시작하였다. 열처리 풋고추와 깻잎을 MDPE 포장에 저장을 하면 각각 저장 4주와 3주까지는 시장품질의 한계선으로 신선도가 유지되었다. 그러나 대파는 포장 내부의 $CO_2$ 농도가 높은 CPP에 포장할 경우 발근이 억제되며 저장 4주까지 시장품질 이상을 유지하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 한국수자원학회 2017년도 학술발표회
• /
• pp.28-28
• /
• 2017

최근 기후변화로 인하여 국지성 집중호우 및 태풍으로 인한 피해가 빈번하게 발생하고 있으며, 산지가 많은 국내에서는 토석류 피해 또한 급증하고 있다. 2011년 집중호우로 인해 서울시에 위치한 우면산에서 많은 토석류가 발생하였고 이로 인해 많은 인명과 재산피해가 발생하였다. 여기서, 토석류란 산악지역의 상류에서 유발된 강우와 함께 토석 및 유목 등이 섞여 계곡하류로 빠르게 이동하는 현상을 의미한다. 이러한 토석류의 피해를 줄이기 위해서는 발생가능성과 범위를 예측하는 것이 무엇보다 중요하며, 토석류 발생에 영향을 미치는 가장 큰 두 가지 원인은 강우와 지형학적인 조건이라고 할 수 있다. 그러나, 현실적으로 강우정보는 하류지역에 위치하고 있는 AWS 기상관측소의 정보만을 이용 할 수 있기 때문에 산악지역에서 시시각각 변화하는 강우정보를 얻는 데는 한계가 있다. 그러므로 시 공간적인 강우의 변동성을 관측할 수 있는 레이더 강우정보를 이용하는 것은 매우 중요하다고 판단된다. 따라서 본 연구에서는 시 공간적으로 우수한 해상도를 가진 레이더 강우 정보와 토석류 2차원 수치해석 모형인 RAMMS(Rapid Mass Move Simulation)모형을 연계하여 토석류 모의를 실시하여 토석류의 유동심, 토석유속, 충격력 등을 산정하였고, 지상강우정보를 이용하여 산정된 결과와 비교함으로서 레이더 강우정보를 이용한 토석류 예측의 적용 가능성을 확인하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 한국수자원학회 2019년도 학술발표회
• /
• pp.66-66
• /
• 2019

침수흔적도는 풍수해로 인한 침수기록(침수심, 침수위, 침수시간 등)을 조사하여 표시한 도면으로 자연재해 경감 및 신속한 대피를 위하여 작성하도록 자연재해대책법에 따라 규정되어있다. 이러한 침수흔적도는 국가 방재에 따른 기초자료로 사용되지만 광범위한 지역을 신속 정확하게 조사하기에는 예산 부족 및 관리 미흡으로 한계가 있다. 따라서 본 연구는 2018년 10월초 경북 영덕군에서 발생한 태풍 콩레이 침수피해사상을 대상으로 위성영상기반 침수판별지도를 작성하였고, 이를 실제자료와 비교하여 침수흔적도 작성 시 첨단영상의 활용가능성을 확인하였다. 위성영상으로는 ESA의 Sentinel-1과 PlanetLab사(社)의 PlanetScope를 활용하였고, 검증에 활용한 자료는 CCTV를 영상자료를 활용하여 정확성을 평가하였다. 침수심과 침수규모를 확인하기 위해 사용한 지형자료는 10m DEM자료와 드론영상자료를 통해 구축한 DSM을 활용하였다. 그 결과 위성영상을 활용한 침수판별지도는 실제 CCTV영상자료와 높은 상관관계를 보이는 것으로 나타났으며, 드론영상을 통해 지형자료를 구축한 경우 DEM에 비해 정확도가 높아지는 것을 확인할 수 있었다. 또한 위성영상자료의 해상도가 높을수록 실제자료와 유사하게 침수규모를 판별할 수 있는 것으로 나타났다. 첨단영상을 활용한 침수흔적도 작성은 기존조사보다 신속하고 광범위하게 자료를 수집할 수 있을 것으로 기대한다.

• Journal of Digital Convergence
• /
• 제17권7호
• /
• pp.109-114
• /
• 2019

The purpose of this study is to analyze the phenomenon studies related to athletic continuity and school life satisfaction of the intellectually disabled students. According to the analysis, the integrated sports volleyball program has acquired athletic skills in the satisfaction of school life and maintained close friendship through cooperation. The participants of intellectually disabled students have been more flexible with the improvement of the physical education volleyball program, and they are affiliated with the school's cooperation, through a cooperative study. Therefore, through the integrated sports volleyball program, students with disabilities can overcome limitations and dissatisfaction with the athletic continuity and satisfaction of school life and achieve the integration they seek in the integrated education.

• Journal of the Korea Computer Graphics Society
• /
• 제14권3호
• /
• pp.31-46
• /
• 2008

The depth of field is the range that the objects inside of this range treated to be focused. Objects that are placed out of this range are out of focus and become blurred. In computer graphics, generating depth of field effects gives a great reality to rendered images. The previous researches on the depth of field in computer graphics can be divided into two major categories. One of them is the distributed ray tracing that samples the lens area against each pixel. It is possible to obtain precise results without noise if enough number of samples are taken. However, to make a good result, a great number of samples are needed, resulting in an enormous timing requirement. The other approach is the method that approximates depth of field effect by post-processing an image and its depth values computed using a pin-hole camera. Though the second technique is not that physically correct like distributed ray tracing, many approaches which using this idea have been introduced because it is much faster than the first approach. But the post-processing have some limitations because of the lack of ray information. In this paper, we first present an improvement technique that corrects the previous post-processing methods and then propose another one that accelerates the distributed ray tracing by using a radiance caching method.