• Journal of The Korean Association For Science Education
• /
• v.19 no.4
• /
• pp.604-621
• /
• 1999

We analyze the admission test problems used in 1998 at the Science Education Center for Gifted Youth at Kyungpook National University (SECGY, KNU). The test consists of two parts, an evaluation of the scientific thinking skills and an evaluation of the achievement for Mathematics and Sciences, the former of which includes evaluations of scientific process skills and logical thinking skills. The problems for the test of scientific thinking skills were developed and standardized by the Korea Education Development Center, while those of the achievement for Mathematics and Sciences were made at SECGY. We calculate the indices of the difficulty and discrimination for each problem to determine whether or not the test is appropriate to apply for selecting number of gifted students among the recommended students from 389 middle schools in Taegu-city and Kyungsang-pook-do Province. We find that both indices of most problems for the test of scientific thinking skills were out range of the appropriate level and. moreover, even those problems which fall into the appropriate range showed very low efficiencies for distractors. We, thus, conclude that the problems of the test of scientific thinking skills are inappropriate to use as a test for admission to SECGY. On the other hand, the problems of the achievement test showed extreme results; the Mathematics problems appeared to be too difficult, whereas the Physics problems appeared too easy. However, overall scores showed a normal distribution, indicating that those problems played crucial role in selecting gifted students. We finally propose several suggestions in developing the test problems and in selecting students at the SECGY.

• Korean Journal of Weed Science
• /
• v.30 no.3
• /
• pp.291-299
• /
• 2010

Cyhalofop-butyl and penoxsulam, known for respective acetyl CoA carboxylase (ACCase) and acetolactate synthase (ALS) inhibitor, have been widely using as a post-emergence foliar application for many years in wet-seeded rice field in Korea. Since 2009, control of Echinochloa oryzoides with cyhalofop-butyl and penoxsulam was no longer satisfactory. Greenhouse and experiment in rice field were conducted to confirm E. oryzoides resistance to ACCase and ALS inhibitors and to compare herbicide treatments for control of the resistant E. oryzoides to ACCase and ALS inhibitors. Three resistant E. oryzoides to ACCase and ALS inhibitors accessions were tested for levels of resistance to cyhalofop-butyl and penoxsulam, base on survival rate. Iksan and Kimje accessions were not any affected to the survival by treatment with recommended doses of two herbicides tested. Buan accession displayed an intermediate response of 62 and 72% survival at recommended doses of cyhalofop-butyl and penoxsulam, respectively. Survival rates to herbicides mixed with ACCase and ALS inhibitors at 3.5 leaf stage of E. oryzoides was over 80%. Benzobicyclon+fentrazamide+bensulfuron SC, benzobicyclon+mefenacet+bensulfuron SC, benzobicyclone +cafenstrole+pyrazosulfuron-ethyl GR controlled effectively by 2 leaf stage of resistant E. oryzoides to ACCase and ALS inhibitors. In the field experiment, single treatment of benzobicyclon+ fentrazamide+bensulfuron SC and benzobicyclon+mefenacet+bensulfuron SC failed to control E. oryzoides, but squential treatment of benzobicyclon+thiobencarb SE and benzobicyclon+ mefenacet+ bensulfuron SC controlled effectively it in rice infant seedling culture with machine. Our results suggest that resistant E. oryzoides to ACCase and ALS inhibitors had not developed multiple resistance to herbicides with different modes of action. In particular, cafenstrole, fentrazamide, mefenacet were effective control measures.

• Journal of radiological science and technology
• /
• v.33 no.1
• /
• pp.19-24
• /
• 2010

The aim of this study was to evaluate the change of bone mineral density according to distal radius rotation and the correlations of the lowest BMD measured by DXA at the lumba versus distal radius. The eleven males were projected distal radius by DR X-ray and the measurement of BMD by DXA of the appropriate position of the forearm were performed on 21 males. The healthy 11 and 21 volunteers without any history of operations, anomalies, or trauma were enrolled. The experiment was performed by two methods. First, The DR X-ray was measured distal radius of 11 males in pronation and supination with three, six and nine degrees, including a neutral position. The ROI was measured by the m-view program on the PACS monitor. Second, The DXA was measured distal radius of 21 males in pronation and supination with five and ten degrees, including a neutral position to evaluate the changes of BMD according to the rotation. A correlation of the BMD in the distal radius with BMD that lumbar spine was performed, along with analysis of the data by SPSS 12.0v. The mean rotation angle of the distal radius about eleven males DR X-ray measured $7^{\circ}$ of pronation (82%, n = 9), $6^{\circ}$ of supination and $0^{\circ}$ of neutral of (9%, n = 1), The total average rotation angle in 11 male was $5.1^{\circ}$ of pronation. The rotation angle of the distal radius about twenty one males on DXA measured $7.2^{\circ}$ of pronation (43%, n = 9), $7^{\circ}$ of supination (24%, n = 5), and $0^{\circ}$ of neutral (33%, n = 7), The total average rotation angle in 21 people was $4.1^{\circ}$ of pronation. The correlation of the analysis of lumba and distal radius were r = 3.0, p = 0.18. consequently, The correlation was not significance. Because BMD of lumba was not coverd for BMD of the distal radius, with a neutral position, Pronation is needed for BMD in the distal radius with the rotation angle measuring at the lowest BMD. the rotation angle about five degrees of pronation of the distal radius is recommended.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.4
• /
• pp.345-350
• /
• 1991

Rough rice samples of Chucheongbyeo, Bongkwangbyeo and Hwaseongbyeo were collected by the National Agricultural Products Inspection Office. Drying methods of rough rice were sun drying and forced ventilation drying by an oven dryer and temperature of the oven dryer was set to 43, 60, 70, or 8$0^{\circ}C$. Moisture content of samples was reduced from ca. 20% to 15% at the end of drying, and additionally to 12.5 % for the drying at 8$0^{\circ}C$. Characteristics related to rice grain quality, milling recovery, ratio of broken and cracked rices, percentage of germination, and sensory scores of the cooked rices were evaluated. Yielding percentage of brown rice and polished rice remarkably decreased by drying at 8$0^{\circ}C$. Percentages of cracked rice and broken rice were within the criterion of the second grade government brown rice (20%) only in the sun dried and the rices dried at 43$^{\circ}C$, on the basis of damaged rice, opaque kernel rice and colored rice. Broken rice percentage of the polished rice was within the criterion for the standard of government rice (5%) in the sun dried and the rices dried at 43$^{\circ}C$. Germination percentage of rough rice was higher than 80% in sun drying and drying at 43$^{\circ}C$, but remarkably decreased by drying rice at 6$0^{\circ}C$ and over. Sensory palatability of the cooked rice decreased with increase in drying temperature. The present governmental method of judging rough rice on the basis of moisture content and appearance of the rough rice appears to be improved to include the ratio of broken and cracked rices.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.4
• /
• pp.345-351
• /
• 2015

Purpose: The purpose of this study was to evaluate the proper axial thickness of zirconia abutment applied to implant in the anterior region. Materials and methods: Zirconia abutments were prepared at different axial wall thickness by processing pre-sintered zirconia blocks via CAD/CAM to obtain equal specimens. The abutments were each produced with a thickness of 0.5 mm (Group 1), 0.8 mm (Group 2), 1.2 mm (Group 3), or 1.5 mm (Group 4). The implant used in this study was a external connection type one (US, Osstem, Pussan, Korea) product and the zirconia abutment was prepared via replication of a cemented abutment. The crowns were prepared via CAM/CAM with a thickness of 1.5 mm and were cemented to the abutments using $RelyX^{TM}$ UniCem cement. A universal testing machine was used to apply load at 30 degrees and measure fracture strength of the zirconia abutment. Results: Fracture strength of the abutments for Group 1, Group 2, Group 3, and Group 4 were $236.00{\pm}67.55N$, $599.00{\pm}15.80N$, $588.20{\pm}33.18N$, and $97.83{\pm}98.13N$, respectively. Group 1 showed a significantly lower value, as compared to the other groups (independent Mann-Whitney U-test. P<.05). No significant differences were detected among Group 2, Group 3, and Group 4 (independent Mann-Whitney U-test. P>.05). Conclusion: Zirconia abutment requires optimal thickness for fracture resistance. Within the limitation of this study, > 0.8 mm thickness is recommended for zirconia abutment in anterior implants.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.1
• /
• pp.36-42
• /
• 2007

To compare the survival rate of periodontal ligament cells preserved in storage media with good availability at the time of an avulsion injury, periodontal ligament cells were incubated in ${\alpha}-MEM$ culture medium containing 10% FBS in condition of $37^{\circ}C$, 5% $CO_2$. These cells were then cultured in HBSS, ${\alpha}-MEM$, milk(S co., P. co.) and tap water at the temperature of 4, 25, $37^{\circ}C$ each in 60 min. The groups were measured by MTT assay. The results were as follows : 1. Among the storage media at $4^{\circ}C$, ${\alpha}-MEM$ and P-milk had the highest preserving ability of periodontal ligament cells, while that of HBSS S-milk and tap was low in order. 2. Among the storage media at $25^{\circ}C$, ${\alpha}-MEM$ had the highest preserving ability of periodontal ligament cells, while that of P-milk, HBSS, S-milk, tap water was low in order. 3. Among the storage media at $37^{\circ}C$, the preserving ability of periodontal ligament cells was very high in ${\alpha}-MEM$, P-milk, HBSS and S-milk, it's lowest in tap water. 4. The preserving ability of periodontal ligament cells in ${\alpha}-MEM$ was high at $4^{\circ}C$ and it's low in order of $25^{\circ}C$, $37^{\circ}C$, but in HBSS was high at $4^{\circ}C$ and it's low at $25^{\circ}C$, $37^{\circ}C$ 5. The preserving ability of periodontal ligament cells in S-milk and P-milk was high at $4^{\circ}C$, $25^{\circ}C$ and it s low at $37^{\circ}C$. In conclusion, HBSS is the storage medium of choice in an avulsion, but in this study it is preferable to choose milk at $4^{\circ}C$ for tooth since it is easy to get and affect cell viability.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.1
• /
• pp.25-32
• /
• 2011

The number of patients requesting services of pediatric dental clinics has been steadily increasing in South Korea. The pediatric dental clinics are comprised of hospital-based clinics and local clinics. The purpose of this study was to analyze new-patient distribution and to survey the motives for visiting the department of pediatric dentistry at Seoul National University Dental Hospital(SNUDH), utilizing questionnaires for parents from May to July 2010. The results are as follows: 1. Age distribution showed that 0-3 year-olds formed the largest group of 29.3%. The average age of patients was 6.2 years old. 2. In the surveys for the parents, the major reason for visiting SNUDH was the referral from other clinics(30.6%). 3. The 75% of patients previously visited other clinics before visiting SNUDH. 1) The greater number of patients(52%) visited general practitioner's clinic than pediatric specialists(48%). 2) More than 90% of the patients visited SNUDH after visiting other clinics for reassuring diagnosis and referrals. 3) The crucial deterring factor of being treated at SNUDH was difficult accessibility.

• Korean Journal of Weed Science
• /
• v.14 no.3
• /
• pp.199-211
• /
• 1994

Butachlor applied pre-emergence at 3.6kg ai/ha inhibited the growth and developments of shoot of barnyardgrass under dry condition, whereas rice was unaffected. Growth of rice and barnyardgrass under water condition was severely inhibited by treatment of butachlor but that of transplanted rice was not affected. The inhibition rate was higher under water condition, in broadcast rice and direct seeded rice than under dry condition, drilled rice and transplanted rice, respectively. The major anatomical response of stem of barnyardgrass seedling to butachlor under dry condition were partial reduction in thickness and collapse of leaf sheath, while not in rice. Broadcast rice on soil under water condition appeared reduction and constriction of leaf primordia thickness, and barnyardgrass formed tubular-like leaves and showed inhibited elongation of apical meristem. On the other hand, transplanted rice did not show these responses.

• Korean Journal of Weed Science
• /
• v.14 no.3
• /
• pp.212-222
• /
• 1994

Thiobencarb retarded the growth of new leaves in only barnyardgrass under dry condition while under water condition the shoot growth of broadcast rice, and both shoot and root growth of barnyardgrass was considerably inhibited. Root elongation of rice and barnyardgrass was severely inhibited only under water condition, while that of transplanted rice was slightly inhibited. Inhibition of shoot and root growth in broadcast, drilled rice and barnyardgrass under water condition was much higher than that under dry condition, whereas the inhibition was less in transplanted rice than direct seeded rice. Microscopically, thiobencarb severely inhibited shoot growth and development of barnyardgrass by inducing tubular-like leaves. The cells of the shoot apices of treated barnyardgrass seedling under dry condition was vacuolated and irregularly arranged. Under water condition, leaf primordia of broadcast rice was constricted, barnyardgrass showed tubular-like leaves, inhibited apices elongation and vacuolated cells(visually lack cytoplasm).

• Korean journal of applied entomology
• /
• v.55 no.4
• /
• pp.421-429
• /
• 2016

Tenebrio molitor larvae contain large amounts of proteins, lipids and other functional materials, enabling this insect to be used as an edible food source in animal feeds and for industrialization. Although many efforts have been made to set up mass rearing systems, few studies have been conducted to establish optimal rearing conditions for the production of high quality T. molitor larvae. Herein we investigated 1) the effects of additional diets on the survival and fecundity of the insect, 2) the relationship between oviposition period and the uniformity of larval size, 3) the effects of rearing density and temperature on insect development, and 4) the storage stability of eggs and pupae at low temperatures given possible temporary production discontinuation. The addition of carrot and zucchini to the traditional wheat bran diet significantly increased the survival and fecundity rate of adult T. molitor. Of the three different oviposition sampling periods (3, 7, and 14 days) used to investigate the uniformity of the hatched larvae in each treatment, the period of 3 and 7 days provided higher uniformity than the 14 days oviposition period. Larval development was faster at $30^{\circ}C$ than at 20, 25, and $35^{\circ}C$. Interestingly, oviposition rates were highest at $20^{\circ}C$ but showed much slower larval development and lower uniformity at $30^{\circ}C$. Regarding the effect of larval rearing densities (1, 10, 20, 30, 40, and 50 larvae per 90 mm diam. dish), larval weight was significantly reduced at higher rearing densities, but larval longevity and length were not influenced by rearing density. The 30 larvae/dish is suggested to be a reasonable density to be applied to mass production systems. When kept at $4^{\circ}C$, T. molitor eggs showed a significant reduction in hatching rate; however, when stored under the same conditions, pupae emergence rates remained high until 10 weeks, suggesting that storage at low temperatures is more suitable for the pupal stage than the egg stage. Our findings suggest that an increase in T. molitor adult survival and fecundity rates and a uniformity of hatched larval development can be achieved with the following recommendations: a combination diet (including wheat bran), a 7-day oviposition period; a larvae-rearing temperature of $30^{\circ}C$, a rearing density of 30 larvae/dish, and the storage of pupal stages at low temperatures in the case of rearing discontinuation. This study serves as a strong foundation for the successful mass production of high quality T. molitor larvae.