• Journal of the Korean Society of Hazard Mitigation
• /
• v.6 no.3 s.22
• /
• pp.29-35
• /
• 2006

Fiber element method in earthquake response analysis of bridges is used to represents a realistic flexural deformation according to nonlinear behavior of beam-column section. Nonlinear pseudo-static analysis of two column bent using fiber element is accomplished and failure mechanism of the plastic hinge region is studied. Load-displacement curve obtained by nonlinear pseudo-static analysis can be applicable to earthquake response analysis by capacity spectrum method. The nonlinear time history analysis of a full bridge model using fiber element experienced by the ground motion corresponding to the target response spectrum is accomplished. The result of time history analysis is similar to that of capacity spectrum method.

• Journal of Korean Society of Disaster and Security
• /
• v.6 no.2
• /
• pp.49-56
• /
• 2013

In this paper, used by the boundary layer wind tunnel test, have conducted a series of wind tunnel experiments, i.e. test the mean velocity profile regarding the surface roughness, turbulence intensity and power spectrum measured by augmentation device. After that, to provide data relevant for the preliminary design step of tall building hazard fluctuating wind loads may be obtained fluctuating pressure coefficients, fluctuating pressure spectrum, autocorrelation coefficients by the boundary layer wind tunnel test. From the results of experiments, this study can be obtained conclusions as follows. 1. We know the fact that the mean velocity profile and the turbulence intensity are well fitted natural wind flow in the boundary layer wind tunnel. 2. The satisfactory agreement of velocity spectrum can be obtained from the compare of fluctuating power spectrum and Von Karman spectrum. 3. We know the fact that the fluctuating pressure spectrums distributed peak at 0.01 Hz-0.1 Hz in the windward surfaces and at 0.1 Hz in the leeward surfaces. 4. We know the fact that the autocorrelation coefficients distributed stationary random processes with application time of hazard fluctuating wind loads.

• International Journal of Highway Engineering
• /
• v.8 no.3 s.29
• /
• pp.29-37
• /
• 2006

The primary objective of this study is to characterize traffic axle loadings that consider Korea specific traffic conditions for developing mechanistic-based pavement design method as a part of Korea Pavement Research Program(KPRP). Although the concept of equivalent single axle load(ESAL) has been generally used since the 1960s for the pavement design, the mechanistic-based pavement design procedure requires more accurate axle loading data on the specific pavement. In this study, axle loading data were collected according to vehicle type and highway functional classification. Axle-load spectrum was then standardized by cumulative density function(cdf), because the axle load spectrum could vary from the observed site, truck traffic volume, and truck type, Finally, this study presented the procedure and S-shaped exponential models for characterizing axle load spectra according to vehicle type and highway functional classification.

• Proceedings of the KAIS Fall Conference
• /
• 2011.12b
• /
• pp.503-506
• /
• 2011

항공기 착륙장치 피로 수명평가에는 안전 수명방법이 사용된다. 안전 수명방법은 항공기 전 수명기간을 모사하는 피로하중 스펙트럼 조건에서 균열 또는 유해한 변형과 같은 구조적 결함이 발생하지 않도록 설계/입증하는 것을 말한다. 설계 단계에서는 해석적 방법을 통해 착륙 및 지상운용하중을 구하고, 이를 착륙장치 피로해석에 적용하여 피로수명을 확인한다. 착륙장치는 수명 기간 중 일반적으로 High Cycle 피로를 겪게 되므로, 피로해석 시 응력 기반의 접근 방법이 적용된다. 시험평가 단계에서는 일반적으로 4배의 운용수명에 해당하는 피로하중 스펙트럼에 대해 시험을 수행하여, 착륙장치의 안전 수명을 최종 입증하게 된다. 이와 같이 항공기 착륙장치 피로 수명평가를 위해서는 착륙 및 지상운용 하중해석에서부터 피로해석, 피로시험에 이르기까지 전 과정이 유기적으로 결합되어 이루어져야 한다. 본 연구에서는 항공기 착륙장치 피로시험에 필요한 세부과정과 관련 기술을 실제 적용 사례와 함께 기술하였다.

• Land and Housing Review
• /
• v.5 no.2
• /
• pp.115-120
• /
• 2014

Site coefficient and amplification factor of current domestic Seismic Design Code (KBC-2009) have no consideration for the domestic ground condition in which the base rock is normally placed within 30m form the surface. Accordingly, in this study dynamic centrifugal test and analysis for pile foundation into clay were achieved. and the response spectrums of free surface and basement were compared with each other. Within the period 1sec., the measured spectral acceleration of free surface and basement was bigger than the design spectral acceleration of SC and SD site. However the measured spectral acceleration of free surface and basement for the period over 1.5sec. was smaller than the design spectral acceleration of SC site. There was no severe difference of spectral acceleration according to the upper structure, embedded depth of foundation and free surface conditions. Consequently, normal domestic apartment housing for the period range over 1.5sec. could be design more economically applying these test result.

• Journal of the Korean Society for Railway
• /
• v.6 no.4
• /
• pp.30-36
• /
• 2003

궤도(track)는 열차가 안전하고 승차감(乘車感)이 좋게 운행되도록 충분한 강도를 가지고 더욱이 양호한 상태로 정비되어 있어야 한다. 일반적으로, 토목구조물(structure)은 하중을 받으면 변위(變位)ㆍ변형하고, 하중이 없게 되면 원래대로 되돌아간다. 즉, 각 부재는 탄성 한계 내로 응력(應力)이 들어가도록 설계된다. 그러나, 궤도는 열차의 하중과 진동을 궤도 자신의 변위 축적으로 흡수하고 있다. 결국, 처음부터 틀림이 진행되어 가는 것을 전제로 한 유일한 구조물이다. 일반적으로는 스프링 하 중량과 축중(軸重)이 큰 차량이 빠르고 대량으로 주행하게 되면 궤도 틀림이 발생하여 진행한다. 궤도 틀림 파형의 성장은 궤도 틀림이라고 하는 공간적인 파형의 시간적인 추이라고 하는 2차원적인 취급이 필요하다. (중략)

• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.5
• /
• pp.1-11
• /
• 2001

The purpose of this study is to develop the main program and pre/post processor for the geometric and plastic non-linear analysis of steel jacket structures subjected to wave and earthquake loadings. In this paper, steel jackets are modelled using geometric non-linear space frames and wave loadings re evaluated based on Morrison equation using the linear Airy theory and the fifth Stokes theory. Random wave is generated using JONSWAP spectrum. For earthquake analysis, dynamic analysis is performed using artificial earthquake time history. Also the plastic hinge method is presented for limit analysis of steel jacket. In the companion paper, the pre/post processor is developed and the numerical examples are presented for linear and non-linear dynamic analysis of steel jackets.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.1
• /
• pp.1-9
• /
• 2001

유체-구조물 상호작용 효과를 고려하여, 실린더형 수중 구조물의 유한요소 모델을 상용 전산코드를 사용하여 작성하고 동적하중에 대한 응답해석을 수행하였다. 구조 유한요소에 부착되는 유체 유한요소로 인하여 발생하는 요소행렬의 비대칭성으로 인하여, 일반적으로 사용되는 유한요소 해석 전산코드로 유체-구조물 상호작용 모델에 대한 응답스펙트럼해석을 수행하는 것은 불가능하다. 이 문제의 해결을 위하여, 등가 비 유체-구조물 상호작용 모델을 구성하고, 등가비 유체-구조물 상호작용 모델에 대한 응답스펙트럼 해석 및 조화가진 응답해석 결과를 이용하여 유체-구조물 상호작용 모델의 스펙트럼 가진에 대한 동적 응답을 계산할 수 있는 효율적인 방법을 제시하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.6
• /
• pp.105-113
• /
• 2018

The proposed model to predict the bridge load carrying capacity uses the impact response spectrum. The spectrum is based on Euler-Bernoulli beam and the center of the bridge width for the moving load location. Therefore, it is necessary to investigate the eccentric moving load effects on the impact factor and response factor. For this, this study considers 10 m width and two-lane simply supported slab bridges and performs the moving load analysis to investigate the variations of peak impact factor and corresponding response factor. The numerical results show that the eccentric load increases both the static and dynamic displacements, but the impact factor is decreased since the incremental amount of static displacement is bigger than that of dynamic displacement. However, the difference of the impact factors between the center and eccentric loadings is small showing less than 0.5%p. In the response factor, the eccentric loading increases both the static and dynamic response factors, compared to the center loading. The difference of the response factor is only 0.18%p. It shows that the eccentric loading has very small effects on the response factor, thus the impact factor response spectrum which is generated based on the center moving load can be used to determine the response factor.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.2 s.31
• /
• pp.229-235
• /
• 1997

In order to check the influence of the randomness in yield strengths on the energy dissipation capacity of steel structures, behaviour factors applied for the "Response Spectrum Method" and their distributions are determined in this study with 7 steel framed models. Also 4 artificial accelerograms simulated with a given spectrum are applied to check the influence of the randomness in seismic action on the behviour factor. To execute numerous time-step calculations for the investigation a time-step analysis method is developed and applied after the reliability estimation to determine the action effects.