• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.3 s.55
• /
• pp.23-31
• /
• 2007

Fast bridge construction has been increasingly needed according to the changed construction environment. This paper deals with quasi-static tests on precast piers for bridge substructures. One of the most crucial aspect of the design of precast prestressed concrete bridge piers is the seismic performance. Seven precast pier elements were fabricated. The amount of prestressing bars, the prestressing force, and the location and number of the joint between segments were the main test parameters. Test results showed that the introduced axial prestress made the restoration of the deformation under small lateral displacement and minor damage. However, there was no effect of the prestress when the plastic hinge region was damaged severely due to large lateral displacement. Judging from the observed damage, the design of the joints in precast piers should be done for the first joint between the foundation and the pier segment. The amount of the necessary prestressing steel may be designed to satisfy the P-M diagram according to the service loads, not by having the same steel ratio as normal RC bridge piers. In order to satisfy the current required displacement ductility, it is necessary to have the same amount of the transverse reinforcements as RC piers. As the steel ratio increases, the energy absorption capacity increases. The number of joints showed a little influence on the energy absorption capacity.

• Economic and Environmental Geology
• /
• v.42 no.1
• /
• pp.55-72
• /
• 2009

The timing of hydrocarbon generation and expulsion from source rocks can be evaluated by reconstructing the geohistory of the basin using petroleum system modeling. The Tyee basin is generally considered having a high hydrocarbon generation potential For the southern part of the basin, the basin evolution from a structural and stratigraphic points of view, the thermal history, and the burial history were reconstructed and simulated using numerical tools of basin modeling. An evaluation of organic geochemistry for the potential source rocks and the possible petroleum systems were analysed to improve the understanding of the hydrocarbon charge of the basin. Organic geochemical data indicate that the undifferentiated Umpqua Group, mudstones of the Klamath Mountains, and coals and carbonaceous mudstones in the Remote Member and the Coquille River Member are the most potential gas-prone source rocks in the basin. The relatively high maturity of the southern Tyee basin is related to deep burial resulting from loading by the Coos bay strata. And the heating by intrusion from the western Cascade arc also affects to the high maturity of the basin. The maturation of source rocks, the hydrocarbon generation and expulsion were evaluated by means of basin modeling. The modeling results reveal that the hydrocarbon was generated in all potential source rocks and an expulsion only occurred from the Remote Member.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.6
• /
• pp.96-105
• /
• 2010

This study identified the dynamic process of sandbar and vegetation distribution of the sandbar on the Tan-cheon River. The study area is located in the lower reaches of the Tan-cheon River that has been managed as an Ecosystem Reserve Area since 2002. For the study, the geomorphological process was analyzed through mapping analysis using a satellite image followed by analysis of the vegetation distribution through an on-site survey. The major findings were as follows : First, In the fluvial geomorphic process, various kinds of sandbars were developed in 1990s, the morphologic characteristics changing continuously. Second, In the distribution of vegetation on the sandbar, the sandbar shore was covered with bare sand substrate or intermittent annual vegetation because of the periodic fluctuation of the water-level due to intensive disturbances. Third, In the relationship between the sandbar formation and vegetation, four types of sandbars were classified: channel-shore stable bar, channel-shore unstable bar, mid-channel stable bar and mid-channel unstable bar, according to the fluvial disturbance & vegetation process. The study verifies that the vegetation distribution is reciprocally related to the geomorphological process. Accordingly, it is meaningful in the selection of plant species and the planting area of the sand bar. However, it is limited to the planting guidelines on river restoration projects. More diverse on-site experimental studies should be conducted.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.3
• /
• pp.68-76
• /
• 2021

Storage racks have suffered huge losses due to earthquakes, but related research and regulations are relatively insufficient non-structural elements compared to the structural elements. In this study, we tried to experimentally analyze the behavioral characteristics of storage racks due to external force according to the fixing conditions of the column-foundations connection of storage racks. In general, the column-foundations connection of storage racks is installed according to the user's convenience without installation standards and regulations. For this reason, this study conducted a behavior analysis test on four full-scale storage racks with the condition of column-foundations connection of four typical storage racks. The behavior characteristics analysis test was performed by two-direction of the shake table with El-Centro seismic wave. To confirm the behavior characteristics according to the magnitude of the seismic load, 50% ~ 150% of the seismic waves were increased by 50% for each test. In addition, a resonance search test was conducted to confirm the natural frequency of each storage racks foundations fixing condition. Among the data obtained through the test, the displacement of the top layer and the permanent displacement after the test were compared for each condition to analyze the behavior characteristics of the column-foundations fixed conditions of the storage racks. As a result, the change of natural frequency was small in storage racks due to the change of the conditions of the foundations, and the behavior characteristics were changed due to the difference of the restoring force due to the change of the storage racks foundations condition rather than the influence of the natural frequency of the input load.

• Journal of Navigation and Port Research
• /
• v.47 no.6
• /
• pp.315-323
• /
• 2023

Marine accidents due to loss of stability of small ships have continued to increase over the past decade. In particular, since sudden winds have been pointed out as main causes of most small ship accidents, safety measures have been established to prevent them. In this regard, to prevent accidents caused by sudden winds, a systematic analysis technique is required. The aim of the present study was to develop a probabilistic approach to estimate extreme value and evaluate effects of wind on motion characteristics of ships. The present study included studies of motion analysis, extraction of extreme values, and motion characteristics. A series analysis was conducted for three conditions: wave only, wave with uniform wind speed, and wave with the NPD wind model. Hysteresis filtering and Peak-Valley filtering techniques were applied to time-domain motion analysis results for extreme value extraction. Using extracted extreme values, the goodness of fit test was performed on four distribution functions to select the optimal distribution-function that best expressed extreme values. Motion characteristics of a fishing boat were evaluated for three periodic motion conditions (Heave, Roll, and Pitch) and results were compared. Numerical analysis was performed using a commercial solver, ANSYS-AQWA.

• Journal of the Society of Disaster Information
• /
• v.13 no.1
• /
• pp.43-50
• /
• 2017

In this study, to investigate the strength enhancement and stress transfer effect of the inflatable chemicals used in the recovery of soft ground or partial settlement, the dilatant solution was prepared and classified by measuring the density and the earth pressure in the sand ground. The inflation reinforcing agent was prepared by injecting into a separate impervious vacuum sheet by dividing into a relatively high expansion group and a low expansion group, and a cementation experiment was performed in the lower part of the homogeneously formed model ground. As a result, reinforcing effect was shown up to about 15cm above the expansion reinforcement, and the soil pressure showed a compaction tendency similar to the concentrated load of $1.150{\sim}11.298t/m^2$.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1989-1993
• /
• 2009

댐의 조절방류가 하류 하천생태에 미는 영향은 매우 복잡하다. 하류생물상에 미치는 영향은 댐에서의 거리, 유황의 변화크기에 따라 달라진다. 흐르는 물에 서식하는 물고기는 좋아하는 수심, 유속 및 하상재질 등을 이용하여 살아간다. 다만 생물상은 주변환경에 적응하거나 변화하는 능력이 있어 댐의 조절방류에 의한 수생태계 변화구조를 명확히 해석하기는 불가능하다(Power et al., 1988). 댐에 의한 일정방류는 생물다양성을 감소시키며, 보다 변동성이 큰 방류하천은 하천, 연안 및 생물상 변화 유도에 긍정적인 것은 사실이다. 또한 큰 규모의 홍수파는 하천지형의 동적활동을 촉진시키며, 이는 하천을 터전으로 서식하는 동물상을 위한 생태학적 여건을 개선시켜 주게 된다. 이는 주변 식생의 생태적 조건 변화에 도움을 주기 때문에 적어도 1년에 2번 정도의 홍수파방류는 하천주변 서식처의 다양성 변화에 필요한 것으로 보고되고 있다(Kondolf and Wilcock, 1996). 최근들어 댐 하류하천의 생태복원을 위해 연속적인 홍수파 방류의 중요성이 강조되고 있는데(Stanford et al, 1996) 자연하도에서 댐과 같은 구조물에 의한 유량조절은 하중도나 사주 등을 발달시키고 사주에서는 두꺼운 식생층이 형성될 뿐만아니라 수목군의 현저한 출현을 보여준다. 이렇게 사주나 식생이 고착됨에 따라 이의 저항을 피해가는 수로가 형성되고 저수로 구간외에서는 식생의 발달이 더욱 왕성해져 그 면적이 확대되고 있다. 결국 사주와 사주가 식생으로 연결되고 여기에 수목이 자라면서 웬만한 홍수에도 파괴되지 않는 거대한 식생대가 출현하게 되는데 우리나라에서도 많은 하천에서 볼 수 있는 현상이다. 또한 댐에 의한 퇴사의 차단은 하천지형의 불균형을 초래하고 식생의 발달과 함께 저수도부는 좁아지고 세굴에 의해 깊어지는 현상을 보인다. 이와같은 현상들은 수문특성의 변화에 의하여 결국 댐의 조절방류에 의한 수문 변화는 하천지형의 변화를 유발하고 하천지형의 변화는 하천환경에 변화를 미치게 된다. 본 연구에서는 실제적으로 댐이 건설된 지역에서 조사된 몇몇의 자료를 분석하여 댐건설후에 나타나는 부정적 영향을 최소화하기 위한 바람직한 댐운영방안을 제시하고자 한다.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.34 no.4
• /
• pp.69-79
• /
• 1992

To estimate soil behavior and structural characteristics under the conditions of cyclic loading, freezing & thawing and initial state, several testing was performed and obtained following results. 1.After repeated freezing and thawing processes, original soil structure was destroyed and changed to globular structure from honeycomb or tube in its structure types. Also above processes resulted increasing the soil compression strain while decreasing the failure stress in stress-strain relationship and reached the soil structure into the mode of brittle fracture. Under cyclic loading conditions, soil cluster which was originally dispersed structure colloided with each other, seperated, and finally the soil failed due to the effect of overcompaction. 2.Through the stabilization processes seperated by four steps, the structure of soil skeleton was changed to quite different globular type. The degree of compressibility of soil was decreased in the normally consolidated zone, while the strength against external load increased due to soil particle stabilization. 3.Soil stress-strain chracteristics were largely influenced by repeated up and down processes of temperature. The maximum deformation was obtained in the case of temperature between 0 10˚C by the reseon of particle cluster reformation. 4.Soil compressibility was largely influenced by the optimum moisture content. Under freezing process, swelling could be found and its magnitude was proportional to the density of soil. 5.Density of soil was decreased as increasing the number or repeated freezing and thawing processes and the largest decreasing rate was found at the first turning point from freezing to thawing cycle.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.2
• /
• pp.51-56
• /
• 2003

The piezoelectric thin film(PVDF: polyvinylidene fluoride) sensors having good dynamic sensing charachteristics can be used to monitor low vwlocit impact on composite structures. The impact response function for composite sandwich beam was derved. The impact tests at low energy without inducing damage were performed on the instrumented drop weight impact tester. The measured signals of PVDF sensors attached on the surface of the beam agreed well with the simulated signals. And the inverse technique was applied to reconstruct the impact forces from the PVDF sensor signals. Most of reconstructed impact forces showed good agreement with the measured forces. The comparison results showed that the piezoelectric thin film sensor can be used to monitor the low velocity impact on composite sandwich structures.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.8
• /
• pp.3638-3643
• /
• 2013

These days, workers in a construction site conduct a rebar bending process with a machine. This bending process has some problems such as long processing time and bad quality of the rebar. In order to manufacture a rebar having precision and machinability, we should study on Spring-back phenomenon. This phenomenon affects a shape of rebar after unloading due to restoration ability of material and it is influenced by bending angle, bending radius and a rebar diameter. The change of spring-back ratio according to the change of the parameters are analyzed by FEM. Consequently, Spring-back increases around $0.1^{\circ}$ as bending angle increases $10^{\circ}$. and it also increases around $0.6^{\circ}$ as diameter of rebar increases from ${\varphi}$ 10mm to ${\varphi}$ 16mm. while we can confirm that it decreases around $0.2^{\circ}$ as bending angle increases $10^{\circ}$.