• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.243-246
• /
• 2009

하이브리드 로켓의 고체 연료에서 축방향 국부 후퇴율은 하이브리드 추진 연소기의 설계 변수 및 성능 변수로 활용 된다. 국부 후퇴율 측정하기 위한 방법으로는 여러 가지 있지만, 침수법은 간단한 방법으로 연료의 형상 및 물리적 특성에 관계 없이 정확하게 축방향 국부 후퇴율을 측정할 수 있다. 본 연구에서는 기존의 국부 후퇴율 측정장비의 문제점을 개선하였고, 실험을 통해 높은 정확성을 가짐을 확인 하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.189-194
• /
• 2007

An experimental real-time hybrid method, which implements the wind response control of a building structure with only a two-way TLMD, is proposed and verified through a shaking table test. The building structure is divided into the upper experimental TLMD and the lower numerical structural part. The shaking table vibrates the TLMD with the response calculated from the numerical substructure, which is subjected to the excitations of the measured interface control force at its top story and an wind-load input at its base. The results show that the conventional method can be replaced by the proposed methodology with a simple installation and accuracy for evaluating the control performance of a TLMD.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.669-673
• /
• 2007

In this study, real-time hybrid test using a shaking table for the control performance evaluation of a U-shaped TLCD controlling the response of earthquake-excited building structure is experimentally implemented. In the test, the building structure is used as a numerical part, on which a U-shaped TLCD adopted as an experimental part was installed to reduceits response. At first, the force that is acting between a TLCD and building structure is measured from the load cell attached on shaking table and is fed-back to the computer to control the motion of shaking table. Then, the shaking table is so driven that the error between the interface acceleration computed from the numerical building structure with the excitations of earthquake and the fed-back interface force and that measured from the shaking table. The control efficiency of the TLCD used in this paper is experimentally confirmed by implementing this process of shaking table experiment on real-time.

• 한국소음진동공학회논문집
• /
• 제18권5호
• /
• pp.485-495
• /
• 2008

An experimental real-time hybrid method, which implements the vibration control of a building structure with only a two-way TLMD, is proposed and verified through a shaking table test. The building structure is divided into the upper experimental TLMD and the lower numerical structural part. The shaking table vibrates the TLMD with the response calculated from the numerical substructure, which is subjected to the excitations of the measured interface control force at its top story and sinusoidal waves input at its base. The results show that the conventional method can be replaced by the proposed methodology with a simple installation and accuracy for evaluating the control performance of a TLMD.

• 콘크리트학회논문집
• /
• 제28권1호
• /
• pp.13-21
• /
• 2016

기존의 강재 보가 콘크리트에 매립되어 볼트접합 연결되는 기존 하이브리드 접합법의 한계와 단점을 개선하기 위하여 단순한 강접합 절점을 갖는 하이브리드 PC 콘크리트 보 시스템을 개발하였다. 개발된 하이브리드 시스템의 원할한 하중전달을 파악하기 위하여 양단 고정단의 보 실험체 3개를 반복 집중하중 하에서 실험하였다. 주요 변수는 강재 보의 길이로서 지점에서 변곡점까지의 거리의 0.25, 0.5 및 1.0배로 변하였다. 모든 실험체는 동일 주철근 지수를 갖는 철근콘크리트 보에 비해 높은 변위 연성비를 나타냈는데, 보의 반복하중-처짐 관계 및 연성은 강재 보의 길이에 영향을 받지 않았다. 보 길이에 따른 연속 변형률 분포 및 붕괴하중에 기반한 극한하중 예측으로부터 제시된 강접합 절점은 구조적 효율성을 갖는다고 판단된다.

• 대한기계학회논문집A
• /
• 제24권5호
• /
• pp.1297-1304
• /
• 2000

The reflective photoelastic experiment can be used more effectively than the transparent type in industrial fields. Therefore the reflective photoelastic experimental hybrid method applied to the fatigue fracture problems is introduced in this research. It is verified that the reflective photoelastic experimental hybrid method is very useful on the determination of crack propagation velocity and stress intensity factor of the fatigue crack and on the separation of stress components in the vicinity of fatigue crack tip etc.

• 대한기계학회논문집A
• /
• 제34권9호
• /
• pp.1287-1292
• /
• 2010

본 연구에서는 균열선단 주위의 응력장을 균열선단으로부터 떨어진 일직선상에서 유한요소법에 의해 계산된 광탄성 등색프린지 차수와 급수형 등각사상 맵핑함수를 이용하여 해석하였다. 해석된 광탄성 응력장을 실제의 광탄성프린지와 비교하였다. 정성적인 비교가 용이하도록 디지털 영상처리에 의해 등색프린지 패턴을 2 배로 증식시키고, 증식된 프린지를 다시 세선처리하여 서로 비교하였다. 유한요소법으로 계산된 프린지 차수를 이용한 하이브리드 응력장 해석에 의해 계산된 프린지와 광탄성 실험에 의한 실제의 프린지를 정성적이고 정량적인 비교를 하였다. 입력된 변위와 계산된 변위의 퍼센트 오차는 18 개의 데이터 모두 6.0% 이하로 서로 일치하였다. 또한 하이브리드 기법에 의한 정규화시킨 응력확대계수 $K_I$ 및 $K_{II}$는 유한요소법과 경험식으로 계산된 값에 근접하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.811-812
• /
• 2011

• 대한기계학회논문집A
• /
• 제23권6호
• /
• pp.988-1000
• /
• 1999

An experimental study is presented for the effect of number of terms of a pewee series type stress function on stress analysis around a hole in tensile loaded plate. The hybrid method coupling photoelastsic data inputs and complex variable formulations involving conformal mappings and analytical continuity is used to calculate tangential stress on the boundary of the hole in uniaxially loaded, finite width tensile plate. In order to measure isochromatic data accurately, actual photoelastic fringe patterns are two times multiplied and sharpened by digital image processing. For qualitative comparison, actual fringes are compared with calculated ones. For quantitative comparison, percentage errors and standard deviations with respect to percentage errors are caculated for all measured points by changing the number of terms of stress function. The experimental results indicate that stress concentration factors analyzed by the hybrid method are accurate within three percent compared with ones obtained by theoretical and finite element analysis.

• 대한기계학회논문집A
• /
• 제28권8호
• /
• pp.1229-1236
• /
• 2004

The specimen materials used in this research are isotropic epoxy resins. The static photoelastic experiment was applied to them. And then the specimens used in photoelastic experiment were fractured under static load. The static photoelastic experimental hybrid method was introduced and its validity had been assured. Crack propagation criterion used the stress components, which are considered the higher order terms, obtained from the static photoelastic experimental hybrid method was introduced and it was applied to the minimum strain energy density criterion, the maximum tangential stress criterion and mode mixity. Comparing the actual initial angle of crack propagation with the theoretical initial angle of crack propagation obtained from the above failure criterions, the validities of the above two criterions are assured and the optimal distance (r) from the crack-tip is 0.01mm in order to get the initial angle of crack propagation of isotropic epoxy resin.