• Polymer(Korea)
• /
• v.31 no.2
• /
• pp.136-140
• /
• 2007

Charge transfer interaction as a hybridization mechanism of silsesquioxane/polymer was tested using carbazole (electron donor) group and dinitrobenzene (electron acceptor) group. Hybridization test was conducted using films made from mixing/casting of poly (carbazole-styrene) (PS/D) and dimtrobenzyl silsesquioxane (Cube/A), and transparent hybrid films were successfully obtained under some conditions. $^1H-NMR$ of PS/D and Cube/A, and W absorption test of hybrid films showed that one acceptor and one donor can form one charge transfer complex when no silsesquioxane molecule was included in films, but transparent hybrids with no phase separation were obtained only at acceptor/donor ratios less than 0.7 : 1. These results also suggested that on average 4 charge transfer complexes form per one silsesquioxane.

• Journal of the Korean Society for Railway
• /
• v.15 no.4
• /
• pp.413-421
• /
• 2012

The purpose of this study is to evaluate the structural dynamic behavior under hybrid control system. The hybrid test is to consider the interaction between the numerical and physical models. In this paper, single degree of freedom hybrid test was performed with one-bay, two-story steel frame structure. One column at the first floor was selected as a physical substructure and one actuator was used for applying the displacement load in horizontal direction. El Centro as earthquake waves was inputted and OpenSees was employed as the numerical analysis program for the hybrid real-time simulation. As a result, the total time of the hybrid test was about 9.6% of actual measured seismic period. The experimental results agreed well with the numerical one in terms of the maximum displacement. In nonlinear analysis, however, material nonlinearity made a difference of residual strain. Therefore, this hybrid dynamic test can be used to predict the structural dynamic performance more effectively than shaking table test, because of the spatial and economic limitations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.4
• /
• pp.630-643
• /
• 2001

In this paper, the performance of a Multi-Carrier DS-CDMA system with Hybrid $SC/MRC- L_{c}/L$ diversity in the multipath Rayleigh fading environment is analyzed and compared with that of a Wideband DS-CDMA system. Each carriers of the number of the input diversity branches in the Multi-Carrier DS-CDMA system is L and among L, the branches of $L_c$ are chosen to be maximum-ratio-combined. And the diversity outputs are coherent-detected and despread by the correlator of each carrier. As the result, we have known that the structure of the Wideband DS-CDMA system with Hybrid $SC/MRC-L_{c}/L$ diversity reception becomes simple due to no synchronization of bit or phase and in terms of the error performance, the performance of Hybrid $SC/MRC- L_{c}/L$ diversity is better than that of selection diversity, but worse than that of MRC diversity. Moreover, the performance of a Multi-Carrier DS-CDMA system is better than that of a Wideband DS-CDMA system in multipath Rayleigh fading channel since Hybrid $SC/MRC- L_c/L$ diversity can obtain gain from each diversity branch. In case four carriers are used and required BER is $10^{-6}$ in wireless data communication, Hybrid SC/MRC-2/4 diversity can increase more 17 users than Hybrid SC/MRC-2/3 diversity because the better input branches can be selected through increase of input branches.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.5
• /
• pp.48-59
• /
• 2021

In this study, experiments were conducted to investigate the compressive·flexural performances of single fiber-reinforced mortar (FRM) using only steel fiber or carbon fiber which has different material properties as well as hybrid FRM using a mixture of steel and carbon fibers. The mortar specimens incorporated steel and carbon fibers in the mix proportions of 1+0%, 0.75+0.25%, 0.5+0.5%, 0.25+0.75% and 0+1% by volume at a total volume fraction of 1.0%. Their mechanical performance was compared and examined with a plain mortar without fiber at 28 days of age. The experiments of mortar showed that the hybrid FRM using a mixture of 0.75% steel fibers + 0.25% carbon fibers had the highest compressive and flexural strength, confirming by thus the synergistic reinforcing effect of the hybrid FRM. On the contrast, in the case of hybrid FRM using a mixture of 0.5% steel fibers + 0.5% carbon fibers witnessed the highest flexural toughness, suggesting as a result the optimal fiber mixing ratio of hybrid FRM to improve the strength and flexural toughness at the same time. Moreover, the fracture surface was observed through a scanning electron microscope (SEM) for image analysis of the FRM specimen. These results were of great help for images analysis of hybrid reinforcing fibers in cement matrix.

• Land and Housing Review
• /
• v.5 no.2
• /
• pp.99-106
• /
• 2014

The purpose of this study is to develop hybrid energy blocks with piezoelectric and electromagnetic induction method. The developed energy block is able to be applied to the housing and facilities in the city and is suitable to adjust the characteristics of facilities. To develop the hybrid energy block, we analyzed the characteristics and requirements of various energy block types and drew improvement and application method to develop energy blocks. We compared and analyzed the characteristics and performance of the prototype energy blocks and the developed hybrid energy blocks. According to result of the comparison and analysis, the developed energy block shows higher performance of 12.7 times for adding one vibration and 28.9 times for five consecutive vibrations than that of a existing prototype energy block. This is consistent with research purposes for W-level electrical energy production. Thus, the new energy block will likely be possible to apply to the housing and urban facility.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.2
• /
• pp.356-363
• /
• 2012

In this study we synthesis Hybrid resin(WPC) by milk casein and waterborne polyurethane(WPU). Then we experiment how casein effect to Hybrid resins in Full-Grain leather coatings. According to measured data for solvent resistance, WPU resin and Hybrid resins had good property. As test of tensile strength, WPU had most low strength(2.130 $kg_f/mm^2$) and WPC-3(WPU 91: casein resin 9) had most high strength(2.191 $kg_f/mm^2$). Also we knew that most good property of abrasion is WPC-3(50.090 mg.loss). In elongation case, WPU had most good result(637 %) in this experiment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.914-925
• /
• 1998

This paper considers the evaluation of the hybrid acquistion perdformance for the pilot signal in the direct sequence code division multiple access(DS/CDMA) forward link. the hybrid acquisition is introduced by the combination of two schemes, the parallel and serial acquisions. The mean acquisition time of the proposed scheme is derived to consider both the best case(the correct code-phase offsets are included i one subset) and the worst case(the correct code-phase offsets exist at the boundary of two subsets), which are cause by the distribution of the correct code-phase offsets in the subset. Expressions for the detection, false alarm, and miss probabilities are derived for the case of multiple correct code-phase offsets and multipath Rayleigh fading channel. Numerical results present the hybrid acquistion performance with repect to design parameters such as postdetectio integration length in the search and verification modes, subset size, and number of I/Q noncoherent correlators, and compare the hybrid acquistion with the parallel acquistion in terms of the minimum acquistion time under the same hardware complexity.

• International Area Studies Review
• /
• v.12 no.3
• /
• pp.89-109
• /
• 2008

Using hybrid channel affords the benefits of achieving control through the direct channel and achieving flexibility through the indirect channel. However, using a hybrid channel also poses special challenges to a manufacturer, including the problem of managing multiple channel members with disparate goals and priorities. The purpose of this study is to enhance our understanding on the management of hybrid channel. We study marketing channels for fashion apparel to examine governance challenges and solutions of a hybrid channel. We have two objectives to fulfill that purpose. First, we aim to tie two largely separate research streams of salesforce management and marketing channel management together by examining both intrafrim governance and interfirm governance issues under one conceptual framework. Second, we aim to lay a ground work for rigorous further research on this topic by tying two major theoretical approaches of governance together under one conceptual framework. Our predictions were tested with data from the survey of apparel manufacturers and retailers. The analysis results support the predictions moderately.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.3
• /
• pp.399-404
• /
• 2002

본 논문에서는 Hybrid $SC/MRC-{L_c}/L$ 다이버시티 수신 기법과 콘볼루션 부호화 기법을 각각 또는 함께 이용할 때의 Multi-Carrier DS-CDMA시스템의 성능 개선을 구하였다. 우선 다중경로 페이딩 및 다중접속간섭의 영향을 분석하고, 두 기법에 의한 성능 개선 정도를 구하여 비교, 분석하였다. Hybrid SC/MRC-Lc/L 수신에서는 각각의 반송파에 대하여 상관을 취하고 상관기 출력들 중에서 가장 큰 신호성분을 {$L_c}$개 만큼 선택하여 최대비 합성하며, 콘볼루션 부호화는 다중경로 다중경로 페이딩 및 다중접속간섭에 의하여 발생된 오류를 정정 및 검출한다. 분석 결과, 콘볼루션 부호화 기법을 채용함으로서 성능이 현저하게 개선되는데, 보호이득과 전력제한 사이에 trade off를 고려하여 부호화 율 (r)을 선택할 필요가 있다는 것과 하이브리드 $SC/MRC-{L_c}/L$ 수신에서는 입력 다이버시티 가지의 수 (L)가 많을수록 선택의 폭이 넓어지며, 적절한 숫자의 다이버시티 가지의 선택이 시스템의 복잡성과 성능 대 배용 등을 결정한다는 것을 알 수 있었다.

• Journal of Broadcast Engineering
• /
• v.17 no.2
• /
• pp.262-269
• /
• 2012

Hybrid-ARQ and opportunistic relaying are the widely used schemes for obtaining diversity gain in wireless communications. In opportunistic relaying, channel state information(CSI) between relays and destination is required to select the best relay. But if the destination moves very fast, the CSI becomes outdated. In this paper, performance of hybrid-ARQ based opportunistic relaying with outdated CSI is analyzed in outage probability and throughput perspective. The analysis is verified by computer simulations.