• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.07a
• /
• pp.332-333
• /
• 2015

본 논문은 하이브리드 방송서비스의 여러 유형 중 ITU-T J.301 에서 정의한 AR-STV 환경에서 시청자가 선호하는 콘텐츠 사업자의 선택에 따라 동일한 방송프로그램에 대해서 서로 다른 하이브리드 방송서비스를 소비할 수 있는 시청자 경험과 시스템에 관해 설명한다. 하이브리드 방송서비스는 방송통신융합서비스의 한 형태로서 방송망과 인터넷을 결합하여 각각의 장점을 살려 기존에 방송망에서 제공하지 못했거나 구현하기 어려웠던 서비스를 시청자에게 효과적으로 제공하는 데 목적이 있다. 이러한 목적의 일환으로 시청자 선호 기반 하이브리드 방송서비스는 시청자에게 방송프로그램 시청 도중에도 선호하는 콘텐츠 사업자를 변경할 수 있는 선택권을 제공함으로써 방송 참여에 대한 관심을 유도하고, 콘텐츠 사업자들에게는 질 높은 콘텐츠 제공 경쟁을 유도함으로써 발전된 하이브리드 방송 환경 조성에 기여할 것으로 기대된다.

• Journal of Navigation and Port Research
• /
• v.37 no.6
• /
• pp.597-601
• /
• 2013

Recently, many studies about the wave power generation system for the marine structure as the hybrid form in linked with the original features have been made of. Of these, the wave power generation system using oscillating water column(OWC) has function to convert wave energy to electrical energy with original function of the break water structure. In this type of generation system, it is important to make the flow of sea water as much as possible without loss. Output characteristics of wave power generation system depending on entrance section were described in the paper. Also, flow quantity changing with entrance section, velocity of sea water and output of wells turbine were measured by simulating OWC wells turbine model in break water, one of the general marine structure. Finally, entrance section was suggested to enhance the energy conversion efficiency based on the results of simulation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.6
• /
• pp.1235-1242
• /
• 2018

When the wind speed changes rapidly, the wind turbine is stopped for the safety of the power system and the mechanical system. At that moment, the wind turbine gearbox is damaged and broken due to the contact load of the gearbox. In addition, the problems such as increasing frictional heat and deteriorate of the brake occur, because the power of the blades is transmitted directly to the brakes. This paper proposes a hybrid magnetic gear shape that solves the problem caused by the contact of the mechanical gear, which is the power transmission device of the wind power generation system, and the power cutoff system. The shape of the hybrid magnetic gearsuitable for the wind power generation system is derived through the torque and loss analysis according to the shape of the hybrid magnetic gear by using the two dimensional finite analysis method.

• Journal of Energy Engineering
• /
• v.26 no.2
• /
• pp.99-120
• /
• 2017

In SS branch of Korea District Heating Corporation, Combined Heat & Power power plant with 99MW capacity and 98Gcal / h capacity is operated as a district electricity business. In this region, it is difficult to operate the generator due to the problem of surplus heat treatment between June and September due to the economic recession and the decrease in demand, so it is urgent to develop an economical energy new business model. In this study, we will develop an optimized operation model by introducing a renewable energy hybrid system based on actual operation data of this site. In particular, among renewable energy sources, fuel cell (Fuel Cell) power generation which can generate heat and electricity at the same time with limited location constraints, photovoltaic power generation which is representative renewable energy, ESS (Energy Storage System). HOMER (Hybrid Optimization of Multiple Energy Resources) program was used to select the optimal model. As a result of the economic analysis, 99MW CHP combined cycle power generation is the most economical in terms of net present cost (NPC), but 99MW CHP in terms of carbon emission trading and renewable energy certificate And 5MW fuel cells, and 521kW of solar power to supply electricity and heat than the supply of electricity and heat by 99MW CHP cogeneration power, it was shown that it is economically up to 247.5 billion won. we confirmed the results of the improvement of the zone electricity business condition by introducing the fuel cell and the renewable energy hybrid system as the optimization process model.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.66-67
• /
• 2011

하이브리드 발전 시스템에서 전압과 주파수제어는 서로 다른 분산전원의 동기화 및 전력제어에 있어 매우 중요하다. 본 논문에서는 하이브리드 시스템 디젤 발전기의 연료 분사량을 조절하는 액추에이터의 전류제어를 위한 디지털 Governor의 제어 알고리즘을 구현하고, 제어기 개발을 통해 부하 가변 시에도 안정된 주파수 값을 얻어내어, 발전기의 운전영역에서 안정된 속도제어가 이루어지는 가를 시뮬레이션을 통해 검증하였다.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.368-368
• /
• 2009

• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.7-8
• /
• 2014

본 논문에서는 보편적으로 태양광 시스템에 적용되는 MPPT(Maximum Power Point Tracking) 기술들이 가지는 단점을 상호 보완하는 하이브리드 MPPT 제어 알고리즘을 제안하였다. 널리 사용되고 있는 MPPT 기술들을 비교하여 분석하였고, 이를 바탕으로 각 기술들의 단점을 상호 보완할 수 있는 요소들을 추출하여 MPPT 알고리즘에 적용하였다. 구현된 알고리즘은 최대전력점으로부터 동작점이 떨어져 있는 경우 빠르게 추적할 수 있는 속응성을 가지며, 정상상태에서는 안정도를 높이고, 국부적인 최대전력점(LMPP; Local Maximum Power Point) 발생 시 이를 감지하여 전체 특성 곡선의 최대전력점(GMPP; Global Maximum Power Point)을 찾아가도록 하였다. 또한 시뮬레이션을 통해 그 특성을 확인하였다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.5
• /
• pp.673-678
• /
• 2011

For the wind-diesel hybrid electric power generation system equiped with two diesel generators, the diesel power sharing is studied analytically and a power sharing technique of less fuel consumption is developed. Based on the technique, as example, a diesel power sharing algorithm is suggested for two diesel generators of capacity 500Kw(200Kw+300Kw).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.828-834
• /
• 2013

In this paper, TMC (Tracker Motion Controller) as one of the many research methods for condensing efficiency improvements can be condensed into efficient solar system configuration to improve the power generation efficiency of the castle with Concentrated solar silicon and photovoltaic systems (CPV)experiments using PV systems. Microprocessor used on the solar system, tracing the development of solar altitude and latitude of each is calculated in real time. Also accept the value from the sensor, motor control and communication with the central control system by calculating the value of the current position of the sun, there is a growing burden on the applicability. Through the way the program is appropriate for solar power systems and sensors hybrid-type algorithm was implemented in the ARM core with built-in TMC, Concentrated CPV system compared to the existing PV systems, through the implementation of the TMC in the country's power generation efficiency compared and analyzed. Sensor method using existing experimental results Concentrated solar power systems to communicate the value of GPS location tracking method hybrid solar horizons in the coordinate system of the sun's azimuth and elevation angles calculated by the program in the calculations of astronomy through experimental resultslook clear day at high solar irradiation were shown to have a large difference. Stopped after a certain period of time, the sun appears in the blind spot of the sensor, the sensor error that can occur from climate change, however, do not have a cloudy and clear day solar radiation sensor does not keep track of the position of the sun, rather than the sensor of excellence could be found. It is expected that research is constantly needed for the system with ongoing research for development of solar cell efficiency increases to reduce the production cost of power generation, high efficiency condensing type according to the change of climate with the optimal development of the ability TMC.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.5
• /
• pp.586-594
• /
• 2012

A future type ship power system requires both economic and eco-friendliness. That is, this should be reduced the discharge quantity of air pollutants and green-house gases as well as have high energy efficiency. Recently, gas turbines have been realized a lot of technical development in terms of efficiency and safety, and are widening the example of their adoption to a GT/ST hybrid system in a power plant as well as an aviation use. This paper reviewed the performance characteristics of a GT/ST hybrid system of several ten MW class, not large capacity, with a simulation in order to evaluate the possibility of a GT/ST hybrid system for ships. The reviewed GT/ST hybrid system has maximum 49 % efficiency, has the highest efficiency point for TIT, and has a 70~75 % and 25~30 % load ratio for a gas turbine and a steam turbine respectively.