• The korean journal of orthodontics
• /
• v.26 no.1 s.54
• /
• pp.105-111
• /
• 1996

Most of orthodontic cases are treated with extraction of certain teeth, which influence the pre-eruptive movement of the lower third molar The purpose of this study was to evaluate the positional change of lower third molar following orthodontic treatment. Pre- and post-treatment pantomograms of 163 orthodontic patients (77 nonextraction group, 78 first premolar- extraction group, 8 second molar- extraction group) were analyzed in terms of the mesiodistal and buccolingual angles of lower third molar. The results were as follows. 1. The change of the mesiodistal angle of lower third molar by orthodontic treatment was significant in second molar-extraction group. 2. The mesiodistal angle of lower third molar in pre-treatment was significantly correlated to the mesiodistal angle in post-treatment and/or the change of the mesiodistal angle by treatment. 3. The change of the buccolingual angle of lower third molar by orthodontic treatment was significant in non -extraction group or first premolar-extrction group. 4. The change of the buccolingual angle of lower third molar by treatment was significantly correlated to the mesiodistal angle in post-treatment, the change of the mesiodistal angle by treatment, the buccolingual angle in pre-treatment or the buccolingual angle in post-treatment.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.2
• /
• pp.215-221
• /
• 2007

The aim of this study was to test whether metric measurements of crown length, root length and apex width during tooth development could be a better basis for correlation with age than the classical methods based on subjective estimations of various stages of tooth development. Panoramic radiographs of 120 children, aged 7 to 9 years, were collected from the department of the pediatric dentistry of Chonnam National University Hospital, Korea. The methods of Mornstad was used to estimate age. The structures measured were crown length root length and apex width in panoramic radiographic. The results were as follows : 1. In the boys, it showed higher correlation between lower 2nd molar crown length, lower 1st molar root length or lower 1st permolar apical width and age. In the girls, it showed higher correlation between lower 2nd premolar crown length, lower 2nd molar root length or lower 1st molar apical width and age. 2. With the aid of a multiple regression model, a linear relationship between some of these distances and age was shown. Boy(months) = 43.958 + lower 2nd molar crown length ${\times}$ 4.392 + lower 1st molar root length ${\times}$ 2.255 - lower 1st permolar apical width ${\times}$ 2.046, Girl(months) = 75.213 + lower 2nd premolar crown length ${\times}$ 3.910 lower 2nd molar root length ${\times}$ 2.280 - lower 1st molar apical width ${\times}$ 6.217 Age was estimated in boys and girls using the mathematic model ; the mean difference between chronological and estimated ages was $-2.1{\pm}6.8$ months for boys and $6.1{\pm}6.2$ months for girls. Therefore, it seems to be more accurate and easier than the earlier methods.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.1
• /
• pp.47-59
• /
• 2016

Purpose: The aim of this study was to investigate the changes in occlusal force after loss of the lower first molar depending on the inclination and extrusion of the adjacent and opposing teeth by using a strain gauge. Materials and Methods: Anatomic teeth were used to reconstruct the normal dental arch with loss of the lower right first molar. A uniformly thick layer of silicone was applied to the root to mimic the periodontal ligament. Four stages of dies with varying degrees of inclination and extrusion of the adjacent and opposing teeth were constructed and attached to master model interchangeably by using a CAD/CAM fabricated customized die system. The strain gauges were attached to teeth and a universal testing machine was used to determine the changes in occlusal force. An independent t-test and one-way ANOVA were performed (${\alpha}=.05$). Results: While simulating chewing food, the upper first, second premolar and lower second molar showed greater occlusal force than before extraction. When the change of adjacent teeth's occlusal force with their progressive movement after molar loss was evaluated, the difference among four die models was significant and was in the decreasing aspect (P < 0.05). Conclusion: When the lower first molar was lost and the adjacent teeth did not move yet, the occlusal force in adjacent teeth was higher than that when the lower first molar still existed. In addition, the occlusal force in the upper premolars and lower second molar decreased significantly with the progressive movement of adjacent teeth.

• The korean journal of orthodontics
• /
• v.31 no.6 s.89
• /
• pp.559-566
• /
• 2001

This study was undertaken to demonstrate the forces in the mandibular alveolar bone generated by activation of the mandibular posterior crossbite appliance in the treatment of buccal crossbite caused by lingual eruption of mandibular second molar. A three-dimensional photoelastic model was fabricated using a photoelastic material (PL-3) to simulate alveolar bone. We observed the model from the anterior to the posterior view in a circular polariscope and recorded photogtaphically before and after activation of the mandibular posterior crossbite appliance. The following results were obtained : 1. When the traction force was applied on the buccal surface of the mandibular second molar, stress was concentrated at the lingual alveolar crest and root apex area. The axis of rotation also was at the middle third of the buccal toot surface and the root apex, so that uncontrolled tipping and a buccal traction force for the mandibular second molar were developed. 2. When the traction force was applied on the lingual surface of the mandibular second molar more stress was observed as opposed to those situations in which the force application was on the buccal surface. In addition, stress intensity was increased below the loot areas and the axis of rotation of the mandibular second molar was lost. In result, controlled tipping and intrusive tooth movements were developed. 3. When the traction forte was applied on either buccal or lingual surface of the second molar, the color patterns of the anchorage unit were similar to the initial color pattern of that before the force application. So we can use the lingual arch for effective anchorage in correcting the posterior buccal crossbite. As in above mentioned results, we must avoid the rotation and uncontrolled tipping, creating occlusal interference of the malpositioned mandibular second molar when correcting posterior buccal crossbite. For this purpose, we recommend the lingual traction force on the second molar as opposed to the buccal traction.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.23 no.1
• /
• pp.19-25
• /
• 1993

The purpose of this study was to evaluate the prevalence and distribution of additonal root in the mandibular 1st molars and premolars by means of the analysis of the full mouth periapical radiographs in 6,082 patients visited the Dental Infirmary of Kyungpook National University Hospital from March 1989 to February 1993. The results were as follows: 1. The incidence of additional root in the mandibular 1st molars was revealed to be 9.32% in total examined patients, and there was a higher prevalence in males(I1.35%) than in females(7.46%). And bilateral occurrence was revealed to be 4.26%. 2. The incidence of additional root in the mandibular premolars was to be 3.57% in total examined patients, and there was a higher prevalence in males(4.28%) than in females(2.91%). And bilateral occurrence in the 1st premolars was revealed to be 1.53%.

• The Journal of the Korean dental association
• /
• v.14 no.6
• /
• pp.539-542
• /
• 1976

저자는 한국인 부착치은의 폭경을 측정하기 위하여 건전한 치은 및 치주조직을 가진 10명의 남자를 대상으로, 기능적인 방법과 조직화학적인 방법을 이용하여 부착치은 경계부인 Mucogingival Junction에서부터 Marginal gingva의 Crrest까지를 측정하였다. 이때 측정된 부위로, 상, 하악 공히 우측 제일대구치 원심면 Papilla로부터 시작하여 좌측 제일대구치 원심면 Pailla까지 각각 25개 부위로 구분하여 모두 50개 부위를 측정 하였다. 따라서 상기한 방법에 의한 측정을 토대로 다음과 같은 결과를 얻었다. 1. 기능적인 방법을 이용하여 측정한 측정치는 조직화학적인 방법에 의한 측정치보다 약 0.30~0.80mm의 높은 수치로 나타났다. 2. 측정치중 가장 높은 폭경을 나타내는 부착치은의 부위는 상악측절치 근심면(9.03~8.84mm 기능적인 방법, 8.49~8.12mm 조직화학적인 방법)이며, 가장 적은 측정치를 나타낸 부위는 하악제일소구치 Cervical부위이다. (3.87~3.70기능적인 방법, 2.82~2.77mm 조직화학적 방법). 3. Frenum 부착부위 치은폭경은 상악 6.27~6.56mm, 하악 6.95~6.07mm 4. 부착치은 폭경 중 가장 측정키 어려운 하악 제 1대구치 cervical부위는 4.17~3.82mm기능적인 방법, 3.86~3.49mm조직화학적인 방법

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.2
• /
• pp.246-251
• /
• 2010

Impactions can occur because of malpositioning of the tooth bud or obstruction in the path of eruption. However, the exact mechanism is still unknown. The impaction of mandibular first molar is rare with prevalence rates of 0.01~0.25%, but it is important to deimpact the tooth as soon as possible to avoid complications such as dental caries, root resorption, and periodontal problems on the adjacent teeth. Several biomechanical strategies have been proposed for uprighting mesially tipped mandibular first molars. However, most of these have had problems with movement of the anchorage unit because of the reciprocal force. The recent development of skeletal anchorage system(SAS) allows direct application of precise force systems to the target tooth or segment, producing efficient tooth movement in a short time. In this case, an impacted mandibular left first molar with dilacerated roots was treated with a miniplate, which provided skeletal anchorage to upright the tooth. The miniplate was installed in the mandibular ramus, and 10 months after the application of orthodontic force, the impacted tooth was exposed in the oral cavity and uprighted. At this point, the mandibular left first molar was included in the orthodontic appliance with fixed mechanotherapy, the tooth could achieve a normal occlusion. Therefore, the use of SAS simplified the orthodontic procedures and reduced the orthodontic treatment period, and had few side effects.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.2
• /
• pp.235-242
• /
• 2008

The purpose of this study was to investigate the relationship of the skeletal maturity of hand-wrist and the development of mandibular third molar in subjects with class I and class III malocclusion. The subjects used in this study were 304 children(149 boys, 155 girls) with class I malocclusions and 308 children( 153 boys, 155 girls) with class III malocclusions, ranged from 8 to 15 years of age. Hand-wrist radiographs and panoramic radiographs were used to evaluate the stage of skeletal maturity and teeth development. Fishman's method for the skeletal maturity stages of the hand-wrist and new six-developmental-stage method for the calcification stages of mandibular third molars were analyzed. The results were as follows : 1. In subjects with class I and class III malocclusion, skeletal maturity of the hand-wrist occured earlier in females than in males(p<0.05), while the calcification stages of mandibular third molars were no significant gender differences. 2. There were no significant differences between the groups, when comparing the skeletal maturity stages of the hand-wrist and the calcification stages of mandibular third molars between subjects with the class I and the class III malocclusion. 3. The correlation coefficients between the calcification stages of mandibular third molars and the skeletal maturity stages of the hand-wrist in subjects with class I and class III malocclusion showed a high interrelationship(p<0.01). 4. The correlation coefficients between the calcification stages of mandibular third molars and chronological age in subjects with class I and class III malocclusion showed a high interrelationship (p<0.01). As a result, there were no significant differences between class I and class III malocclusion group for skeletal maturity of the hand-wrist and third molar development.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.22 no.2
• /
• pp.185-193
• /
• 1992

The purpose of this study was to evaluate the prevalence and distribution of tooth number anomaly by means of the analysis of panoramic radiographs in 6,531 patients visited the Dental Infirmary of Kyungpook National University Hospital from January 1983 to May 1992. The results were as follows: 1. The prevalence of congenitally missing teeth except third molar was revealed to be 10.8%, and there was a hihger prevalence in females(44.6%) than in males(55.4%). Mandibular 2nd premolars(23.2 %) were absent most frequently, followed by maxillary lateral incisors(18.4 %), mandibular lateral incisors(18.3%), and maxillary second premolars(15.4 %) in descending order of frequency. As to the number of congenitally missing teeth, the percentage of missing one tooth was 48%, missing two teeth was 35.4 %, missing three teeth was 6.6%. 2. he prevalence of congenitally missing third molars was revealed to be 39.7%. There was a higher prevalence n the maxilla(60.3%) than in the mandible(39.7%). Maxillary right 3rd molars(30.6%) were absent most frequently, followed by maxillary left 3rd molar(29.7%), mandibular right 3rd molar(202%), mandibular left 3rd molar(19.5%) in descending order of frequency. 3. The prevalence of supernumerary teeth was revealed to be 4.2%, and there was a higher prevalence in males(65.7%) than in females(34.3 ). They were ound most frequently in maxillary central incisor area(64.8%), followed by maxillary lateral incisor area(132%), posterior area of maxillary third molar(8.7%) in descending order of frequency. As to the number of supernumerary teeth; The percentage of one supernumerary tooth was 79.9%, two supernumerary teeth was 8.9%, three supernumerary teeth was 1.2 %.

• The korean journal of orthodontics
• /
• v.26 no.1 s.54
• /
• pp.113-124
• /
• 1996

The purpose of this report is to present the successful improvement of occlusal relationship and facial estherics in Class II div.1 malocclusion by orthodontic treatment with upper first premolars and lower second premolars extracted. Before treatment, the patients showed Class II div. 1 relation with severe overjet. deep overbite, large ANB angle, retrusive mandible and a convex soft tissue profile. After treatment, normal canine and molar relationships were obtained. Facial esthetics were improved. There were no mesial tipping of lower first molars and root resorptions. With the adequate diagnosis and treatment plan and biomechanics, the application of upper first and lower second premolar extraction may be one of good strategies in some Class II cases treatment.