• The korean journal of orthodontics
• /
• v.37 no.4
• /
• pp.260-271
• /
• 2007

The purpose of this study was to evaluate the relationships between the occlusal plane angle and craniofacial skeletal pattern in relation to anterior overbite. Methods: Lateral cephalograms of 90 adults with skeletal class III malocclusions were traced and measured to analyze skeletal factors and occlusal plane angles. In terms of anterior overbite, all patients were classified into 3 subgroups of positive overbite, edgebite, and negative overbite groups. All measurements were evaluated statistically by ANOVA and Duncan's Post Hoc, and correlation coefficients were evaluated among measurements. Results: In this study, some skeletal measurements (saddle angle, articular angle, Y axis, AFH, SN-FH, SN-Mn, FH-Mn) showed a significant difference among the 3 groups in relation to overbite changes. Correlation coefficient showed that PFH/AFH, SN-Mn, Mx-Mn, and FH-Mn showed a significant difference with FH-Occ, Mx-Occ, and Mn-Occ. Regression analysis showed that Mx-Mn had a determination coefficient of 0.714, 0.560, and 0.677 in relation to FH-Occ, Mx-Occ, and Mn-Occ, respectively. Conclusion: This study suggests that consideration of the occlusal plane in relation to the maxillomandibular vertical skeletal state enable the establishment of a more predictable orthognathic surgery result.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.731-740
• /
• 1998

In the previous studies about prescription of preadjusted appliance, occlusal plane was used as a reference plane for crwon angulation (tip) measurement. But this reference plane is not parallel to the line connecting the facial axis points at which the centers of brackets are positioned (Andrews' plane), due to the curve of Spee. Therefore, we developed a new reference plane unaffected by the curve of Sun and more parallel to the Andrews' plane. It is an imaginary line connecting mesial and distal marginal ridges of each posterior tooth, and we named it 'marginal ridge plane'. In this study, crown angulations of posterior teeth of 29 normal occlusion samples were measured and measurements from both reference planes were compared. Crown angulation measurements measured from occlusal plane were different from crown angulation measurements from marginal ridge plane in the upper and lower 2nd molars (p<0.01), md 1st premolars (p<0.05). These results were analyzed as the crown angulation measurements from occlusal plane were affected by the curve of Spee. Crown angulations should be varied according to the amount of curve of Spee to maintain the continuity of marginal ridges. To solve this problem, determining bracket angulation as the bracket slot is parallel to the marginal ridge plane of each posterior teeth is recommended.

• Imaging Science in Dentistry
• /
• v.38 no.3
• /
• pp.169-176
• /
• 2008

Purpose : To assess the diagnostic accuracy and value in an imaging technique field through the comparison of cone beam computed tomography and conventional panoramic radiography in assessing the topographic relationship between the mandibular canal and impacted third molars. Materials and Methods : Participants consisted of 100 patients offered the images through cone beam computed tomography and panoramic radiography. PSR-$9000^{TM}$ Dental CT system (Asahi Roentgen Ind. Co., Ltd, Japan) was used as the unit of cone beam computed tomography. CE-II (Asahi Roentgen Ind. Co., Ltd, Japan) and Pro Max (Planmeca Oy, Finland) were used as the unit of panoramic radiography. The images obtained through panoramic radiography were classified into 3 types according to the distance between mandibular canal and root of mandibular third molar. And they were classified into 4 types according to the proximity of radiographic feature. The images obtained through cone beam computed tomography based on the classification above were classified into 4 types according to the location between the mandibular canal and the root and were analyzed. And they were classified into buccal, inferior, lingual, and between roots, according to the location between mandibular canal and root. The data were statistically analyzed and estimated by $X^2$-test. Results : 1. There was no statistical significance according to 3 types (type I, type II, type III) through CBCT. 2. The results of 4 types (type A, type B, type C, type D) through CBCT were as high prevalence of CBCT 1 in type A, CBCT 2 in type B, CBCT 3 in type C, and CBCT1 in type D and those of which showed statistical significance (P value=0.03). 3. The results according to location between mandibular canal and root through CBCT recorded each 49, 25, 17, 9 as buccal, inferior, lingual, between roots. Conclusion : When estimating the mandibular canal and the roots through the panoramic radiography, it could be difficult to drive the views of which this estimation was considerable. Thus it is required to have an accurate diagnostic approaching through CBCT that could estimate the location between mandibular canal and roots.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.48 no.1
• /
• pp.50-63
• /
• 2021

Microcephalic osteodysplastic primordial dwarfism type II (MOPD II) is an autosomal recessive inherited disorder form of primordial dwarfism, caused by mutations in the pericentrin gene. The purpose of the study was to examine the clinical and radiological features, physicochemical properties and microstructures of the tooth affected with MOPD II. The mandibular 2nd molar was collected from the MOPD II patient. Micro-computerized tomography, scanning electron microscopy, energy dispersive spectrometry and Vickers microhardness analysis were performed on the MOPD II and the normal control. The morphology of the MOPD II tooth appeared to have malformed pulp and root and showed a small size. The mineral density measurement showed that the MOPD II tooth had similar scores in the enamel, but lower scores in the root 1/2 and apical dentin compared to the normal control. The microhardness values were smaller in the cusp enamel, root 1/2 dentin and apical dentin of the MOPD II compared to the normal control. In this study, the dental characteristics and the physicochemical properties of a tooth affected with MOPD II were analyzed to improve understanding of the oral manifestations of the disease and to assist in proper dental treatment by identifying precautions.

• The korean journal of orthodontics
• /
• v.34 no.2 s.103
• /
• pp.189-195
• /
• 2004

The purpose of this research is to evaluate and compare the plaque removal ability of sonic brushing and manual brushing in order to present a method for continuous and effective oral hygiene control during orthodontic treatment. Nonextracted adolescent patients (male: 23 persons, female: 37 persons) and adult patients (male: 15 persons, female: 45 persons) outfitted with a fixed orthodontic appliance from their incisors to second molar, in both the maxilla and mandible, were divided into manual brushing and sonic brushing groups. A Philips oral healthcare HX-4401 sonic toothbrush was used, and the application of brushing for the two groups was standardized at two minutes. After brushing, the plaque score was measured with a modified Wilkin's PHP. The following results were achieved after comparing each group's plaque score. 1. In patients with a fixed orthodontic appliance when age was not accounted for, the application of sonic brushing exerted a beneficially decreased effect on the plaque score. (adolescents : p<0.01, adults: p<0.05) 2. When comparing the adolescent and adult groups in regard to plaque score, the adolescent group showed a more decreased effect. 3. When using the same toothbrush type, there was no difference between the adolescent and adult groups.

• The Journal of the Korean dental association
• /
• v.50 no.9
• /
• pp.566-573
• /
• 2012

Purpose : This study evaluated the impact of the presence and aspect of mandibular third molars to the mandible angle fracture or condyle fractures in Korean. Materials and Methods : A retrospective study was designed for patients attending the division of Oral and Maxillofacial Surgery, Kang-dong sacred heart hospital for treatment of mandibular fracture from January 2006 to September 2010. The primary variable was the presence of mandibular third molar and the secondary variable was the aspects of third molar impaction. Mandibular third molars were classified by the impaction depth and the available space as Pell & Gregory system. Outcome variables were the presence of mandibular angle fracture or condyle fracture. Also the source of trauma, age, sex were studied. Hospital charts, radiographs were used for study. Statistic analysis was done with descriptive statistics, the X2-test, linear-by-linear association. P value under 0.05 was considered significant statistically. Results : The number of involved patients was 86. The ratio of male to female patients was about 9:1 for angle fracture and 7:3 for condyle fracture. The most common source of trauma was assault for angle fracture and fall down for condyle fracture. The presence of mandibular third molar increased frequency of angle fracture and decreased condyle fracture with larger impaction depth. But available space of mandibular third molar did not show high association with angle or condyle fractures. Conclusion: Preventive extraction of mandibular third molar is recommended for patients with high risk of angle fracture. Male patients at their third decade or martial artists, police officer could be the case. But it is not recommended for patients with low risk of angle fracture and high risk of condyle fracture relatively. Elder female patients without any symptom on their third molar could be the case.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.23 no.3
• /
• pp.217-225
• /
• 2001

Any fracture passing through the socket of a teeth is compounded intraorally, even if the fracture is not displaced and the tooth is firm in its socket. Before the advent of antibiotic therapy the danger of infection in a compounded fracture posed severe problems in treatment. Infection is reduced by antibiotic therapy but prolonged use of antibiotics is not justified in an attempt to save a tooth which might eventually be sacrificed. There is still controversy in the management of third molar in mandibualr angle fracture, particulary in regard to their retention or removal at the time of fracture treatment. So we surveyed the 159 patients who were treated with open reduction of mandibular angle fracture containing third molar in fracture line, and compared with the postoperative infection rate depending on time intervals between injury and operation, eruption state of third molar, non-extraction or extraction of third molar related to eruption state, non-extraction or extraction of third molar related to condiition of third molar and its surrounding periodontium and were to propose treatment guidline of third molar in mandibular angle fracture The results obtained were as follows : 1. There were no statistical significance between the time from injury to operation and postoperative infection. 2. There were no statistical significance between eruption state of third molar and postoperative infection. 3. In case of retention of the third molar, there were no statistical significance between eruption state of third molar and postoperative infection, but in case of extraction, postoperative infection was high rate in complete impacted cases. 4. There were no statistical significance between non-extraction or extraction of third molar and postoperative infection depending on condition of third molar. There are no difference in infection rate statistically according to the time from injury to operation, eruption state and condition of third molar, but retention of third molar revealed lowered infection rate in completely impacted cases. By terms of the manegement of third molar, we should extract or preserve third molar in the line of the mandibular angle fracture according to possibility of infection.

• Restorative Dentistry and Endodontics
• /
• v.32 no.1
• /
• pp.61-68
• /
• 2007

The purpose of this study was to compare the centering abilities of four root canal instrument systems and the amounts of dentin removed after root canal shaping using them. The mesial canals of twenty extracted mandibular first molars having $10-20^{\circ}$ curvature were scanned using X-ray micro-computed tomography (XMCT)-scanner before root canals were instrumented. They were divided into four groups (n = 10 per group). In Group 1, root canals were instrumented by the step-back technique with stainless steel K-Flexofile after coronal flaring. The remainders were instrumented by the crown-down technique with Profile (Group 2), ProTaper (Group 3) or K3 system (Group 4). All canals were prepared up to size 25 at the end-point of preparation and scanned again. Scanned images were processed to reconstruct three-dimensional images using three-dimensional image software and the changes of total canal volume were measured. Pre-and post-operative cross-sectional images of 1, 3, 5, and 7 mm from the apical foramen were com pared. For each level, centering ratio were calculated using Adobe Photoshop 6.0 and image software program. ProTaper and K3 systems have a tendency to remove more dentin than the other file systems. In all groups, the lowest value of centering ratio at 3 mm level was observed. And except at 3 mm level, ProTaper system made canals less centered than the other systems (p < 0.05).

• Journal of Periodontal and Implant Science
• /
• v.31 no.4
• /
• pp.651-659
• /
• 2001

후박추출물은 치주병인균에는 항균효과가 있고, 치은섬유아세포에는 세포독성이 적은 것으로 알려져 있으며 홍아씨 추출물은 골아세포를 활성화시키는 효과가 있어 골조직재생에 효과가 있는 것으로 알려져 있다. 이 실험의 목적은 비글견에 인위적으로 치주염을 유도하고 후박추출물과 홍화씨추출물의 혼합물을 투여함으로써, 이 두 가지 혼합물이 치주염 진행에 예방효과가 잇는지, 또, 치료효과가 있는지 알아보는 것이다. 후박과 홍화씨를 구입하여 에탄올에서 추출하여 정제하고 진공상태에서 건조시켜 농축하였다. 후박추출물과 홍화씨 추출물을 1:5의 질량비로 혼합하고 250㎎씩 캡슐에 넣었다. 비글견의 상하악 소구치와 하악 제1대구치를 8주 동안 철사와 견사로 결찰하여 치주염을 유발하였다. 8주 후에, 실험군 비글견에게는 미리 후박추출물과 홍화씨추출물 혼합물을 매 12시간마다 하루에 1,500㎎ 씩 12주 동안 투약하였다. 대조군 비글견에는 투약을 하지 않았다. 투약을 시작한 후에 치은지수, 부착수준을 매 4주마다 측정하였다. 매 4주마다 치주낭에서 페이퍼포인트를 이용하여 혐기성세균과 호기성세균을 채취, 배양하여 각각의 집락 수를 세었다. 그 결과 실험군의 치은지수는 8주, 12주에서 대조군보다 유의하게 낮았고(p<0.05)), 임상적으로도 상당한 치은염의 개선을 보였다. 실험군의 혐기성세균 집락수는 감소하여 4, 8, 및 12주에서 대조군에 비해 유의하게 낮았고(p<0.001), 호기성 세균 집락수는 4, 8, 및 12주에서 대조군에 비해 유의하게 낮았다.(p<0.05)이 실험 결과, 후박 추출물과 홍화씨 추출물 혼합물이 치주질환의 예방 및 치료에 이용되어질 수 있을 것으로 생각된다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.4
• /
• pp.324-332
• /
• 2011

Purpose: The purpose of this study was to compare the stress distribution of teeth and jaw on load by differentiating property of materials according to each layer of widely used mouthguard. Materials and methods: A Korean adult having normal cranium and mandible was selected to examine. A customized mouthguard was constructed by use of DRUFOMAT plate and DRUFOMAT-TE/-SQ of Dreve Co. according to Signature Mouthguard system. The cranium was scanned by means of computed tomography with 1mm interval. It was modeled with CANTIBio BIONIX/Body Builder program and simulated and interpreted using Alter HyperMesh program. The mouthguard was classified as follows according to the layers. (1) soft guard (Bioplast)(SG) (2) hard guard (Duran)(HG) (3) medium guard (Drufomat)(MG) (4) soft layer + hard layer (SG + HG) (5) hard layer + soft layer (HG + SG) (6) soft layer + hard layer + soft layer (SG + HG + SG) (7) hard layer + soft layer + hard layer (HG + SG + HG) The impact locations on mandible were gnathion, the center of inferior border, and the anterior edge of gonial angle. And the impact directions were oblique ($45^{\circ}$). The impact load was 800 N for 0.1 sec. The stress distribution was measured at maxillary teeth, TMJ and maxilla. The statistics were conducted using Repeated ANOVA and in case of difference, Duncan test was used as post analysis. Results: In teeth and maxilla, the mouthguard contacting soft layer of mandibular teeth presented lowest stress measure and, in contrast, in condyle, the mouthguard contacting hard layer of mandibular teeth presented lowest stress measure. Conclusion: For all impact directions, soft layer + hard layer + soft layer, the mouthguard with three layers which the hard layer is sandwiched between two soft layers, showed relatively even distribution of stress in impact.