• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.4
• /
• pp.431-441
• /
• 2021

Full-mouth rehabilitation with increasing vertical dimension can be used for patients with severely worn teeth. In severely worn teeth also, the alveolar process can be elongated to compensate for the reduced vertical dimension, and the patient's vertical dimension of occlusion can be kept constant. However, full-mouth rehabilitation with increasing vertical dimension must be carefully chosen, because the vertical dimension can be reduced by tooth wear. It is important to establish a treatment plan with the systematic diagnosis of the change in the vertical dimension and gain space for the prosthesis. It is necessary to change the vertical dimension to secure the restoration space and select the minimum vertical dimension elevation for the esthetic and functional goal. In this case report, the patient complained of difficulty during chewing due to a worn dentition and wanted esthetic improvement of the short mandibular anterior teeth. After systematic evaluation and diagnosis, we performed full-mouth rehabilitation with minimum vertical dimension elevation to obtain the space for restoration. This resulted in a stable and harmonious occlusion, and the functional and esthetic problems of the patient were solved after treatment. The patient was satisfied with the results of the treatment and maintained stable occlusion during the follow-up period.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.3
• /
• pp.143-152
• /
• 2019

Purpose: The aim of this study is to investigate the characteristics of patients and teeth referred to a university dental hospital for endodontic problem. Materials and Methods: From January, 2017 to December, 2018, patients who were referred to a university dental hospital for endodontic problem were collected from clinical records. A total of 1171 patient records were analyzed. The status of the referred teeth was divided into three groups according to whether they were treated endodontically based on radiographs and clinical records at the time of referred visit. Results: 69.9% of the referred teeth were maxillary and mandibular first and second molars. The average time from referral to actual visit is 9.03 days and 65.6% of the case referred with referring letter. The most primary reasons of referral were persistent clinical symptom (pain, swelling, and sinus tract) (37.9%), diagnosis difficulty (16.7%), blockage of canal space (13.8%) and difficult tooth anatomy (11.4%). In the case of referral before endodontic treatment, the most primary reason of referral was failure to make a proper diagnosis. If the teeth were referred in the middle of endodontic treatment, the most primary reason of referral was persistent clinical symptom and blockage of canal space. In the case of referral after root canal filling, the most primary reason of referral was persistent clinical symptom. Conclusion: In the case of molars, the rate of persistent clinical symptom and blockage of canal space were the most primary reason of referral, and the rate of apical surgery and management of trauma was high in the case of anterior teeth.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.2
• /
• pp.202-210
• /
• 2022

Recently with the advance in digital dentistry, the fabrication of dentures using computer-aided design and computer-aided manufacturing (CAD-CAM) is on the rise. The denture designed through a CAD software can be produced in a 3-dimensional manufacturing process. This process includes a subtractive processing method such as milling and an additive processing method such as 3D printing and in which it can be applied efficiently in more complex structures. In this case, complete dentures were fabricated using Stereolithography (SLA)-based 3D printing to shorten the production time and interval of visits in patient with physical disabilities due to cerebral infarction. For definitive impression, the existing interim denture was digitally replicated and used as an individual tray. The definitive impression obtained with polyvinyl siloxane impression material was including information about the inclination and length of the maxillary anterior teeth, vertical dimension, and centric relation. In addition, facial scan data with interim denture was obtained so that it can be used as a reference in determination of the occlusal plane and in arrangement of artificial teeth during laboratory work. Artificial teeth were arranged through a CAD program, and a gingival festooning was performed. The definitive dentures were printed by SLA-based 3D printer using a FDA-approved liquid photocurable resin. The denture showed adequate retention, support, and stability, and results were satisfied functionally and aesthetically.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.39 no.3
• /
• pp.133-145
• /
• 2023

Class III malocclusion with mandibular protrusion can be divided into skeletal and pseudo malocclusion due to tooth displacement. For skeletal malocclusion, favorable treatment results can be obtained by establishing an appropriate vertical and horizontal intermaxillary relationship in order to secure a restoration space and obtain aesthetic and functional results. In this case, complete mouth rehabilitation was performed using an implant and a fixed prosthesis in a patient with mandibular protrusion and anterior teeth wear and reduced occlusal vertical dimension. After cast analysis and digital diagnosis, a provisional restoration with increased vertical dimension was fabricated to secure posterior support and evaluate stable centric occlusion. With the definitive prosthesis reflecting the provisional restoration, favorable function and aesthetics were obtained.

• The korean journal of orthodontics
• /
• v.27 no.3 s.62
• /
• pp.373-389
• /
• 1997

The purpose of this stdudy was to evaluate the effect of maxillary protraction and the relapse of hard and soft tissue after maxillary protraction. For this study 29 patients who were treated with maxillary protractor and labiolingual archwire were selected. Their mean age was 9 years 4 months and mean treatment period was 8.5 months. Lateral cephalograms were taken at pretreatment, immediately after treatment and one to three months after removal of the maxillary protractor. They were traced on skeletodental and soft tissue structures based on Burstone's analysis and analyzed by Quick-Ceph Image Digitizing System(ORTHODONTIC PROCESSING). The mean and standard deviation between pretreatment and posttreatment and between posttreatment and retention period for each cephalometric variable were calculated. Student t-test was used to determine the statistical significance of the changes in each variable. Correlation coefficients between hard tissue and soft tissue were used to determine interrelationship. The results were as follows. 1. After maxillayy protraction, the maxilla and maxillary dentition moved antero-inferiorly, the mandibld and mandibular dentition moved postero-interiorly and palatal plane rotated antero-superiorly by $0.59^{\circ}$. 2. After maxillary protraction, the soft tissue of upper lip moved antero-interiorly with the movement of hard tissue but the antero-posterior position of lower lip was stable in spite of the change of hard tissue. The thickness of upper lip was decreased and that of lower lip was increased after maxillary Protraction. 3. During the retention period, the position of jaws was relatively stable but upper and lower anterior teeth and antero-superiorly rotated palatal plane relapsed to original position. 4. During the retention period, the soft tissue of lips was stable antero-posteriorly and moved mote inferiorly than posttreatment. 5. The correlation coefficients between the postion of upper and lower incisal edge and that position of lips were high, especially in horizontal change.

• The korean journal of orthodontics
• /
• v.25 no.1 s.48
• /
• pp.73-85
• /
• 1995

Multi-Vertical Loop Arch Wire(MVLAW) is a kind of appliance for uprighting the mesially inclined posterior teeth axes simultaneously. In this study MVLAW was classified as 3 types by modifing the vertical loop design and named type A, B and C. Each MVLAW was fabricated from .017'x.025' TMA wire and preactivated at the distal end of the open vertical loop with 10 degree tip-back bend(type B has an electric welding stop at the distal end of each loop and type C has no electric welding stop). Type A MVLAW was preactivated at the apex of each open vertical loop with 10 degree tip-back bend(the electric welding stop of type A is positionod at the mesial side of each loop). The aim of the present study was to identify when and which MVLAW is more effective to correct the buccal segment axes simultaneously. The Photoelastic overview of the upper and lower right quadrant showed that stress concentrations were observed in its photoelastic model. The obtained results were as follows : 1. Higher level compression can be seen clearly at the distal curvature of the lower 1st and 2nd molar when A type MVLAW was applied without short class m elastic, but mild compression cannot be seen at the distal curvature of lower anterior teeth using the class m elastic. 2. Higher concentration was presented at the mesial curvature from the lower 1st premolar to the 2nd molar than the anterior teeth when B type MVLAW without short class III elastic was applied, but using the short class III elastic, higher concentration of compression was presented in the anterior teeth area. 3. Areas of higher compression and tension were not observed at the mesial and distal curvature of the entire 1ower teeth except lower central and lateral incisors in C type MVLAW without short class III elastic, but using the short class III elastic, higher concentration was seen at the mesial curvature of the lower 1st premolar and 1ower anterior teeth.

• The korean journal of orthodontics
• /
• v.30 no.2 s.79
• /
• pp.159-174
• /
• 2000

Many treatment approaches of Cl III malocclusion have been introduced and the choice of treatment should be a function of the individual problem, not of the clinician(personal preference, experience and success rate of the operator). Therefore a function of the individual problem should be analysed exactly Much has been written in the orthodontic literature concerning the nature of Cl III malocclusion. It has been reported by many investigators that a Cl III malocclusion occurs in a variety of skeletal and dental configurations by differences of race and age. Lateral cephalometric radiographs of 125 individuals were studied for the presence and distibution of four horizontal components and one vortical component in a manner similar to McNamara. The results were as follows : 1. Cl III malocclusion is not a single clinical entity. It can result from numerous combinations of skeletal and dental components. 2. Maxillary skeletal retrusion was the most common single charateristic of the Cl III sample. 3. Only a small percentage of the cases in this study exhibited maxillary dentoalveolar protrusion. 4. Only a small percentage of the cases in this study exhibited mandibular dentoalveolar retrusion. 5. Mandible was usually well-positioned, but a wide variation was observed. 6. A large percentage of the cases in this study exhibited excessive vertical development. Thus, it appears that in designing the ideal treatment regime, those approaches which might restrict vertical development and promote maxillary horizontal growth could be more appropriate in many cases.

• The korean journal of orthodontics
• /
• v.39 no.6
• /
• pp.362-371
• /
• 2009

Objective: The purpose of this study was to compare the longitudinal treatment effects of facemask with rapid maxillary expansion (FM/RME) and chincup (CC) therapy followed by fixed orthodontic treatment (FOT) in Class III malocclusion (CIII) patients. Methods: The samples consisted of twenty-one CIII patients who had similar skeletal and dental characteristics before FM/RME or CC therapy and good retention results (Class I molar/canine relationship and positive overbite/overjet) after FOT (Group 1, FM/RME, n = 11; Group 2, CC, n = 10). Lateral cephalograms were taken before (T0) and after FM/RME or CC therapy (T1), and after FOT and retention (T2). Skeletal and dental variables were measured. Mann-Whitney U-test and Wilcoxon signed-rank test were used for statistical analysis. Results: During T0-T1, FM/RME therapy induced forward movement of point A, and labioversion of the upper incisors. Both groups showed posterior repositioning of the mandible. FM/RME resulted in increase of the vertical dimension; however, CC caused an increase in articular angle and decrease in gonial angle. During T1-T2, both groups exhibited forward growth of point A. Group 1 showed forward growth and counterclockwise rotation of the mandible and increase of IMPA; however, Group 2, showed increase of ANS-Me/N-Me and decrease of overbite. Conclusions: The key factor for successful FM/RME and CC therapy and good retention results might be a harmonized forward growth of the maxilla that could keep pace with the growth and rotation of the mandible.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.136-147
• /
• 2009

Statement of problem: Since the introduction of the concept of osseointegration in dental implants, high long-term success rates have been achieved. Though the use of dental implants have increased dramatically, there are few studies on domestic implants with clinical and objective long-term data. Purpose: The aim of this retrospective study was to provide long-term data on the $Implantium^{(R)}$ implant, which features a sandblasted and acid-etched surface and internal connection with microthreads. Material and methods: 106 $Implantium^{(R)}$ implants placed in 38 patients at Yonsei University Hospital were examined to determine the effect of various factors on implant success and marginal bone loss, through clinical and radiographic results during a 6 to 30 month period. Results: 1. Out of a total of 106 implants placed in 38 patients, one fixture was lost, resulting in a 99.1% cumulative survival rate. 2. Among the 96 implants which were observed throughout the study period, the survival rates were 97.0% in the maxilla and 100% in the mandible. The survival rate in the posterior regions was 98.9% and 100% in the anterior regions. 3. The mean bone loss during the first year after prosthesis placement was 0.17 mm, while the mean annual bone loss after the first year was 0.04 mm, which was statistically less than during the first year(P<.05). 4. There was no significant difference in marginal bone loss according to age during the first year(P>.05), but after the first year, the mean annual bone loss in patients above 50 years was significantly greater(P<.05) compared with patients under 50 years. 5. No significant difference in marginal bone loss was found according to the following factors: gender, jaw, location in the arch, type of implant(submerged or non-submerged), presence of bone grafts, type of prostheses, and type of opposing dentition(P<.05). Conclusion: Based on these results, the sole factor influencing marginal bone loss was age, while factors such as gender, jaw, location in the arch, type of implant, presence of bone grafts, type of prostheses and type of opposing dentition had no significant effect on bone loss. In the present study, the success rate of the $Implantium^{(R)}$ implant with a SLA surface and internal connection with microthreads was satisfactory up to a maximum 30 month period, and the marginal bone loss was in accord with the success criteria of dental implants.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.1
• /
• pp.48-54
• /
• 2010

Purpose: The objective of this study was to evaluate and compare the accuracy of impression body taking by the closed and the open tray impression technique with 3 types of impression tray. Individual tray, metal stock tray and polycarbonate tray were used. Materials and methods: Nine closed tray impressions were taken by individual tray, metal stock tray and polycarbonate stock tray, respectively with polyether impression material. 9 open tray impressions were also acquired by same manner. Precision analysis on the master models was performed by attaching the reference frameworks with alternate single screws and measuring the vertical fit discrepancy of respective analogues in working cast with a stereo microscope. Data were analyzed by 1 way ANOVA and independent t-test. Results: The average fit accuracy of impression bodies was calculated. With the closed tray impression technique, there were significant statistical differences in vertical fit discrepancy according to the types of tray. The individual tray group showed the lowest value and the polycarbonate stock tray group represented the highest. With the open tray impression technique, there was no significant difference in vertical fit discrepancy. Significant statistical difference in vertical fit discrepancy was found between the open and the closed impression technique with the polycarbonate stock tray. Conclusion: From the results above, more precise impressions could be acquired by the rigid individual tray compared with the polycarbonate stock tray. It was hard to get consistent accuracy impressions by the closed tray impression technique with polycarbonate stock trays.