• Journal of the Korean Ceramic Society
• /
• v.33 no.4
• /
• pp.432-440
• /
• 1996

ZrO2 gel was prepared under pH 10 alkaline condition by sol-gel process and was investigated as a function of calcination temperature and effect of calcination temperature on cobalt adsorption capacity. The ZrO2 powder prepared by sol-gel process was calcined at 600, 800, 1000, 1200, 140$0^{\circ}C$ and analyzed by X-ray diffractometry. SEM specific surface area by BET nitrogen adsorption FT-IR and TG-DTA technique. It was shown that cobalt adsorption capacity of ZrO2 prepared under pH 10 alkaline condition and then calcined at $600^{\circ}C$ in high temperature was determined to be larger than that of ZrO2 at various calcination temperature. The specific surface area of ZrO2 calcined at $600^{\circ}C$ was 24.03m2/g and cobalt adsorption capacity at 25$0^{\circ}C$ high-temperature water was 0.16m-eq/g.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.04b
• /
• pp.84-87
• /
• 2000

The microwave dielectric properties of complex perovskite-structured $Ba(Mg_{1/3}Ta_{2/3})O_3$ ceramics were investigated with calcining condition. The BMT ceramics were prepared by conventional mixed oxide method. Calcining conditions were $1200^{\circ}C$ for 10hr., $1300^{\circ}C$ for 2hr., and 5hr., respectively. And the specimens were sintered at $1650{\mu}m$. The structural and microwave properties of BMT ceramics were investigated by XRD, SEM and network analyzer. In the case of BMT ceramics calcined at $1300^{\circ}C$ for 5 hr., dielectric constant, quality factor and temperature coefficient of resonant frequency were 20.26, 31,144(at 1GHz), 6.11[ppm/$^{\circ}C$], respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.288-288
• /
• 2007

본 연구에서 내환원성 $BaTiO_3$의 PTCR(Positive Temperation Coefficient Resistance) 특성 및 미세구조에 대한 분쇄 및 출발 원료들의 하소 조건의 영향을 연구하였다. $BaCO_3$, $TiO_2$, $CeO_2$를 Attrition milling 하여 1차 혼합 및 분쇄한 후 건조하여 혼합분말을 얻었으며, $(Ba_{1-x}Ce_x)TiO_3$를 합성하기 위하여 $1000^{\circ}C{\sim}1200^{\circ}C$ 공기중에서 하소하였다. 각 하소온도에서 제조한 $(Ba_{1-x}Ce_x)TiO_3$에 첨가제를 2차 혼합하고 초미분쇄하여 분말을 제조하였다. 직경 5mm 의 시편을 제조하여 환원 및 재산화 분위기에서 소결을 한 후 상온저항값 및 R-T특성을 측정하였고 SEM 을 통해 미세구조를 관찰하였다. 또한 하소 후 온도에 따른 상분석을 XRD를 통하여 분석하였다. 그 결과 하소온도가 증가함에 따라 상온저항값은 감소하는 경황을 보였으며 PTC특성은 감소하다가 증가하는 경향을 보였다. 초미분쇄에 따른 입자크기는 $1{\mu}m$이하로 작아졌으며 미립화가 됨에 따라 하소/소결온도에 앙향을 줄 것으로 사료된다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.4
• /
• pp.414-422
• /
• 1995

Coal fly ash was calcined and elutriated for recycling as ceramic raw materials. C Crystal phases, morphologies, chemical components, particle size distributions and Ig. loss of as-received, calcined and elutriated coal fly ash were investigated to study the effects of the calci nation and elutriation on the coal fly ash classification. The experimental equations, which were used in elutriation of clay, were examined in order to find out which equation is appropriated for coal fly ash classification. It turned out that Rittinger's equation is relatively well matched for the fly ash. Having nothing to do with the treatment conditions, the crystal phases of coal f fly ash were mullite, quartz. Calcite peak was detected in as - received and elutriated coal fly a ash; however, it disappeared in calcined coal fly ash. As - received coal fly ash consists of various type of particles such as a cenosphere, coke type, silicate type, whisker type and aggregat e ed type. In case of calcined coal fly ash, coke type particles were eliminated and agglomerated type particles were relatively increased. Most of the particles that were relatively spherical cenosphere in the 4th step of elutriator. Particle size distribution was narrowed by calcination a and elutriation. Especially, in elutriation, particle size distribution was very narrow.

• Journal of the Korean Ceramic Society
• /
• v.38 no.4
• /
• pp.380-387
• /
• 2001

140$0^{\circ}C$ 환원 분위기(질소-수소) 조건에서 열처리하여 반도성 SrTiO$_3$하소분말을 제조하였다. 하소분말을 이용하여 135$0^{\circ}C$에서 2시간동안 상압 소결하여 소결체를 제조하였으며, 이때 소결 분위기에 따른 소결체 입계의 전기적 특성을 고찰하였다. 이들 소결체는 전형적인 바리스터 특성을 나타내었으며, 특히 소결 분위기를 질소-수소로부터 공기로 변화시킴에 따라서 소결체의 문턱 전압, 입계 비저항 그리고 입계 전위 장벽은 430V/cm, 10MΩ.cm 그리고 2.0$\times$$10^{-3}$eV로부터 1000V/cm 이상, 240 MΩ.m 그리고 1.1eV로 변하였다.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.9
• /
• pp.735-742
• /
• 2009

The bone of spinal animals has a hydroxylapatite ($Ca_{10}(PO_4)_6(OH)_2$, HAp) structure which is well known as an excellent inorganic ion exchanger for various heavy metal ions in solutions. In this study, the reusability of cow-bone, pig-bone and fish-bone as a potential material for the removal of heavy metals in solutions was evaluated from the removal of Cu(II) ion in batch tests. The surface properties of three bones, calcined at different temperatures, were measured with SEM, XRD, FT-IR analyses. From the SEM analysis, a clear development of heterogeneity as well as pores having small diameter was observed as the calcination temperature increased. The results of X-ray diffraction analysis showed well developed crystallinity on the surface of calcined bones obtained at higher temperatures, suggesting a transform of amorphous type to crystalline type. Fourier transform infrared (FT-IR) analysis showed disappearance of water molecule on the surface of HAp and organic functional groups of the HAp with increasing the calcination temperatures. Cu(II) removal in the control test was below 15%. By the way, additional 40% increase of Cu(II) removal was observed in the presence of calcined bones. For three bones, Cu(II) removal was decreased as the calcined temperature increased. Cu(II) removal was increased as the solution pH increased due to a favorable condition for the cation exchange as well as precipitation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.198-198
• /
• 2006

Tin doped $In_2O_3$ sputtering target is widely used to produce a various kinds of flat panel display because of high transmittance in visible region and high electrical conductivity. In2O3 and SnO2 powders were prepared by a homogeneous precipitation method using metal source, respectively, the calcining and sintering behavior of the indium-tin oxide(In2O3-SnO2) composite powders were studied. The tin oxide(SnO2) dispersion condition in ITO sputtering target was improved by increasing calcining temperature. And the tin oxide dispersion was also improved by reducing the tin oxide contents in the ITO target from 30 to 5wt%. SnO2 dispersion and densification of ITO target is very difficult to control due to sublimation of SnO2 at over 1150C.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.4
• /
• pp.78-85
• /
• 2007

This study provides an attempt to evaluate sanding wastes, generated from a chemical company as a reused adsorbent. Organic impurities in the raw sanding wastes were removed by calcination at $550^{\circ}C$. Aluminum was a major inorganic composition in the raw sanding wastes and increased from 29.09% to 52.73% after calcination. Dissolved concentrations of heavy metals from the calcined sample were below 0.3 mg/L in a stability test at pH 2. From the pH-edge adsorption experiments with the calcined sanding wastes, As (V) was found to follow an anionic-type adsorption. Adsorption isotherm obtained with variation of the dosage of the calcined sanding wastes was better described by Freundlich equation than Langmuir one. Freundlich constants of K and 1/n were 4.244 and 0.316, respectively. The As (V) adsorption capacity of calcined sanding wastes estimated from Langmuir isotherm was 13.25 mg/g. From this study, the calcined sample was identified as a good reusable adsorbent in the view point of stability and adsorption capacity on As (V).

• Proceedings of the KIEE Conference
• /
• 2000.11c
• /
• pp.482-484
• /
• 2000

압전 세라믹은 공정 조건에 따라 압전 및 전기적 특성이 큰 영향을 받는다. 최적의 조건을 갖는 압전변압기를 제조하기 위해서는 이런 공정의 변수들의 변화를 관찰할 필요성이 있다. 본 논문에서는 이런 압전 특성을 관찰하고자, 하소의 온도를 $850^{\circ}C$에서 $900^{\circ}C$도까지 시간변화에 따라 phase 변화를 XRD로 관찰하고 burn out의 온도에 따른 기공변화 및 소결의 온도변화에 따른 임피던스 어낼라이저로 주파수 특성을 관찰하였다. 이렇게 조사해본 결과 하소를 $900^{\circ}C$에서 3시간 burn out을 $500^{\circ}C$에서 2시간, 소결을 $1250^{\circ}C$에서 2 시간 한 경우가 $Q_m>1000$, $k_p>0.40$ 값을 얻을 수 있었다.

• Journal of the Korean Ceramic Society
• /
• v.31 no.11
• /
• pp.1378-1386
• /
• 1994

The characteristic of calcined BaTiO3 powder and sintered PTC ceramics was investigated varing with calcination temperature and time of BaTiO(C2O4)2.4H2O synthesized from BaCl2.2H2O, TiCl4, oxalic acid and ethanol by oxalic acid method. When the particle size was less than 0.1 ${\mu}{\textrm}{m}$ by controlling calcination temperature and time, the resistance at room temperature was measured very high (above M{{{{ OMEGA }}). However, when the calcined particle sizes ranged from 0.2 to 0.3 ${\mu}{\textrm}{m}$, the resistance was 100 {{{{ OMEGA }} (After sintering, the grain size was 10~30 ${\mu}{\textrm}{m}$ homogeneously with the addition of dopant in sintering, the resistivity, resistance, $\alpha$ value and jumped to were 110{{{{ OMEGA }}.cm, 24$^{\circ}C$/% and 106{{{{ OMEGA }}, respectively.