• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.05a
• /
• pp.142-147
• /
• 2002

폴리머/세라믹 복합체는 내장형 캐패시터(embedded capacitor)의 유전 재료로 많은 관심을 불러 일으키고 있다. 본 연구는 BaTiO$_3$분말의 크기와 함량이 에폭시/BaTiO$_3$복합체 캐패시터의 유전 상수와 누설전류에 미치는 영향에 대해 살펴보고 이에 대해 고찰하고자 하였다. BaTiO$_3$분말이 67vo1% 함유된 Epoxy/BaTiO$_3$composite 필름의 유전상수는 전반적으로 사용한 BaTiO$_3$분말의 크기가 커짐에 따라 증가하였다. 이것은 입자의 크기가 증가함에 따른 입자의 유전상수의 증가 때문이며 XRD 분석을 통해 입자의 크기가 증가함에 따라 tetragonality가 증가함을 확인하였다. 복합체 필름의 누설전류도 또한 사용한 입자의 크기가 커짐에 따라 증가하였으며 이는 분말의 크기가 증가함에 따라 단위길이 당 입자의 수가 감소하는 것으로, 단위 길이 당 입자의 수가 감소하여 전류의 흐름을 방해하는 입자/폴리머/입자 계면의 수가 감소하기 때문이다. 분말의 함량에 따른 유전상수는 unimodal과 bimodal의 경우 각각 73vo1%와 80vo1%에서 최대 값을 나타냈으며 그 이상에서는 감소하는 것이 관찰되었는데 이는 과량의 분말이 조밀 충전을 깨고 필름의 밀도를 낮추기 때문이었다. 누설전류의 경우 unimodal과 bimodal 각각에 대해 73vo1%와 80vo1%에서 급격한 증가를 관찰 할 수 있었으며 이는 percolation 현상의 발생에 의해 입자와 입자간에 접촉이 이루어져 BaTiO$_3$분말을 따라 전류가 잘 흐를 수 있는 conduction path가 형성 되기 때문이다.

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.4
• /
• pp.59-65
• /
• 2001

Epoxy/$BaTiO_3$composite capacitor films with excellent stability at room temperature, uniform thickness, and electrical properties over a large area ware successfully fabricated. The composite capacitor films with good film formation capability and easy process ability were made from epoxy resin developed for ACF as a matrix and two kinds of $BaTiO_3$powders as fillers to increase the dielectric constant of the composite film. The crystal structure of the powders and its effects on dielectric constant of the films were investigated by X-ray diffraction (XRD). And the optimum amount of dispersant, phosphate ester, was determined by viscosity measurement of suspension. DSC and dielectric property tests were conducted to decide the right curing temperature and the optimum amount of the curing agent. As a result, the capacitors of 7 $\mu \textrm{m}$ thick film with 10 nF/$\textrm{cm}^2$ and low leakage current were successfully demonstrated.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.2 s.31
• /
• pp.1-9
• /
• 2004

We investigated the effect of $BaTiO_3$ powder content on the dielectric constant of epoxy/$BaTiO_3$ composite embedded capacitor films (ECFs). Variations of the dielectric constant of epoxy/$BaTiO_3$ composite ECFs with unimodal $BaTiO_3$ powder content were measured. To explain this result, density of the ECFs was measured, and surface and cross section images of the ECFs were observed. In addition, variations of the dielectric constant of epoxy/$BaTiO_3$ composite ECFs with various bimodal combinations were measured. In the case of unimodal powder, the maximum dielectric constant was about 60 at $60\;vol\%$ S4 powder. And more powder addition lowered the dielectric constant of the ECFs, which was due to voids or pores formation by excess $BaTiO_3$ powder. In the case of bimodal combination, $75vol\%\;BaTiO_3$ powder loading and the dielectric constant of 90 were achieved using $S_5+C_1$ combination, biggest and smallest powder combination.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.1
• /
• pp.87-96
• /
• 2004

Polymer/ceramic composites are the most promising embedded capacitor material for organic substrates application. Predicting the effective dielectric constant of polymer/ceramic composites is very important for design of composite materials. In this paper, we measured the dielectric constant of epoxy/$BaTiO_3$ composite embedded capacitor films with various $BaTiO_3$ particles loading for 5 different sizes $BaTiO_3$ powders. Experimental data were fitted to several theoretical equations to find the equation useful for the prediction of the effective dielectric constant of polymer/ceramic composites and also to estimate the dielectric constant of $BaTiO_3$ powders. The Lichtenecker equation and the Jayasundere-Smith equation were useful for the prediction of the effective dielectric constant of epoxy/$BaTiO_3$ composites. And calculated dielectric constants of the $BaTiO_3$ powders were in the range of 100 to 600, which were lower than those of $BaTiO_3$ bulk ceramics.

• Food Science and Preservation
• /
• v.14 no.5
• /
• pp.451-456
• /
• 2007

The vitamin C content in extruded comstarch matrix was shown to depend on extrusion process variables (barrel temperature and water content), the packaging method, and the storage period. In addition, loss rates of vitamin C under different processing conditions were calculated. Extrusion process variable were barrel temperature ($80^{\circ}C,\;90^{\circ}C,\;100^{\circ}C$ and $110^{\circ}C$), and water content (25% 30% both w/w). The vitamin C content decreased as barrel temperature increased from $80^{\circ}C$ to $110^{\circ}C$ and water content increased from 25% to 30% when either LDPE plastic film packaging or ON film vacuum packaging were employed. As barrel temperature and water content increased, vitamin C decreased in comstarch packed in either LDPE film or ON film. As temperature increased, vitamin C loss rate increased under both packaging conditions, but the loss tate was only 50% of the LDPE film packaging rate when ON film vacuum packaging was used. In conclusion, the higher the temperature, and the greater the water content, the less vitamin C was inactivated during extrusion cooking, although the loss rah of vitamin C became faster as temperature and water content rose. In conclusion, extrusion process could be applied for making vitamin C matrix to extend vitamin C preservation.

• Journal of the Microelectronics and Packaging Society
• /
• v.9 no.2
• /
• pp.11-17
• /
• 2002

Polymer/ceramic composite is of great interest as a dielectric material for embedded capacitors. This paper is concerned in the effects of $BaTiO_3$ particle size on epoxy/$BaTiO_3$ composite films for embedded capacitors. 6 different size powders smaller than 1 $\mu\textrm{m}$ in diameter and bisphenol-A type epoxy were used for this experiment. Dielectric constant of the epoxy/$BaTiO_3$ composite capacitors increases as the powder size increases at the same powder loading, which is due to the increase of tetragonality of the powders as particle size increases. And leakage current of the capacitors also increases dramatically as the powder size increases. It was explained that this is due to the decrease of the number of $BaTiO_3$epoxy/$BaTiO_3$ potential barriers per unit length and, moreover, the enhancement of potential barrier lowering effects caused by increase of potential drop per one barrier. As a result, there is tradeoff between high dielectric constant and low leakage current in the epoxy/$BaTiO_3$ composite capacitors. So it is important to select proper size $BaTiO_3$ powders in accordance with needs.

• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.611-616
• /
• 2011

In the study, annealing temperature was optimized by comparing with avrami crystallization rate and constant (k) using non-oriented PLA film as a base film. Crystallization rate constant of PLA film was 1.64, 1.68, and 1.26 at $120^{\circ}C$, $130^{\circ}C$, and $140^{\circ}C$, respectively. Annealing temperature was mainly affected on the surface properties such as rougnness (Ra) and kinetic friction coefficient (${\mu}_k$). Roughness of PLA film was 0.006 ${\mu}m$ at $80^{\circ}C$ and increased to 0.009 ${\mu}m$ 0.015 ${\mu}m$, 0.027 ${\mu}m$, and 0.029 ${\mu}m$ at $110^{\circ}C$, $120^{\circ}C$, $130^{\circ}C$ and $140^{\circ}C$, respectively. Kinetic friction coefficient decreased 0.45 to 0.43, 0.33, 0.31, 0.27 as annealing temperature was at $80^{\circ}C$, $110^{\circ}C$, $120^{\circ}C$, $130^{\circ}C$, and $140^{\circ}C$, respectivly. In addition, rate constant (k) was 0.58, 0.46, and 0.39 with adding 1 wt%, 3 wt%, and 5 wt% talc, respectively.

• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.582-587
• /
• 2012

In this paper, it was studied on the crystallization characteristics of PLA film by adding ammonium phosphate (APP) as a nucleation agent. Crystallinity and crystallite size of PLA film were determined by Scherrer equation. Crystallization rate constant of PLA film was calculated through Avrami equation. Film samples in the study were prepared by two steps. PLA films were prepared by adding 1, 5, and 10 wt%, respectively, at first and was secondly annealed at 130, 140, and $150^{\circ}C$. Crystallinity of pure PLA film was average 4.6% and those of PLA film with adding 1, 5, and 10 wt% APP were 12.2, 47.7, and 50.0%, respectively. Crystallite size of PLA film was average 28.0 nm and those of PLA film with adding 1, 5, and 10 wt% APP were 26.8, 24.0, and 19.0 nm, respectively. Crystallization rate constants of PLA film with 1 wt% APP were 2.12, 3.86, and 0.27 by annealing at 130, 140, and $150^{\circ}C$, respectively, where was higher than pure PLA film and those with adding 5 and 10 wt% APP, respectively.

• Microbiology and Biotechnology Letters
• /
• v.26 no.5
• /
• pp.465-469
• /
• 1998

The quantitative and rapid method for measuring the biodegradation of polymer materials in soil was developed. In this study, cellophane film was used as a model biodegradable polymer and the biodegradation was assayed by measuring the amount of glucose which was produced by a hydrolysis reaction using HCl after collecting the film from soil. Cellophane film was degraded 41.2% in 4 months during winter while it was degraded 76.5% in 2 months during summer. It means that biodegradation in soil is affected by environmental conditions. The biodegradation was also measured in an incubator (30$^{\circ}C$, humidity 50-55%) to exclude the environmental variations. Cellophane film was degraded 94% in that condition in 40 days. The biodegradation showed the first order kinetics and the rate constant was 0.067 (1/day). Acceleration of the biodegradation in soil was also studied. We added cultured soil microorganisms or nutrients such as N, P, and S into the soil. While the addition of microorganisms showed the temporary increase of rate constant, the addition of nutrients not only showed the increase of rate constant from 0.096 (1/day) to 0.21 (1/day) but also maintained the effect continuously.

• Korean Journal of Optics and Photonics
• /
• v.15 no.1
• /
• pp.63-67
• /
• 2004

We have obtained optical constants for cholesteric liquid crystal (CLC) films by fitting theoretical spectra of transmittance and reflectance with measured ones. Berreman's 4${\times}$4 matrix approach was used for the calculation of theoretical spectra. The fitting method was applied to three samples with different reflection bands and fitted results of refractive indices for CLC samples were compared with measured ones for a parallel-aligned LC sample. It was found that the two results were in fairly good agreement within the error of the fitted results for the three CLC samples.