• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.6
• /
• pp.681-687
• /
• 2014

Nuclear industries have faced unfavorable circumstances such as an obsolescence of the instrumentation and control system, and therefore nuclear society is striving to resolve this issue fundamentally. IEC and IAEA judge that FPGA technology is a good replacement for Programmable Logic Controller (PLC) of Nuclear Instrumentation and Control System. FPGAs are currently highlighted as an alternative means for obsolete control systems. Because the main function inside an FPGA is initially developed as software, good software quality can impact the reliability of an FPGA-based controller. Therefore, it is necessary to establish a software development aspect strategy that enhances the reliability of an FPGA-based controller. In terms of software development, HDL-Programmed Device (HPD) Development Life Cycle is applied into FPGA-based Controller. The burn-in test and environmental(temperature) test should be performed in order to apply into nuclear instrumentation and control system. Therefore it is ensured that the developed FPGA-based controller are normally operated for 352 hours and 92 hours in test chamber of Korea Institute of Machinery and Materials (KIMM).

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.12
• /
• pp.1365-1372
• /
• 2014

In recent, the LTE(Long-Term Evolution) mobile communication system has been commercialized and a variety of service is being provided. Comparing to the old wireless access systems such as 3G mobile communications, in particular, the LTE system supports a service requiring a high transmission rate by providing broadband wireless access. In order to understand the possibility of successful support of a multimedia service such as IPTV(Internet Protocol Television) through the LTE system, it is necessary to understand the mechanism that decides the transmission rate supported by the LTE system. This paper, therefore, discusses on the relationship between a number of metrics such as CQI and BLER that affects the transmission rate with the measurement results from the field tests.

• Journal of agriculture & life science
• /
• v.52 no.6
• /
• pp.127-138
• /
• 2018

In this study, the operational characteristics of a domestic vegetable transplanter were investigated. The main functional components and power path of the tranplanter were analyzed. The link structure of transplanting device waskinematically analyzed, and 3D modeling and dynamic simulation were performed. Based on this analysis, the trajectory of the bottom end of the transplanting hopper was analyzed. Also, the plant spacing according to the engine speed and the shifting stage of transplanting transmission was analyzed and verified by field test. As main results of this study, the transplanting device is one degree of freedom(DOF) 4-bar link type mechanism which comprises 10 links and 13 rotating joints. The transplanting hopper plants seedlings in a vertical direction while maintaining a constant posture by the links of transplanting device. The power is transmitted to both the driving part and transplanting part from the engine, and the maximum and minimum plant spacing of the transplanting device were 428.97 mm and 261.20 mm.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.1092-1095
• /
• 2019

In this paper, we propose the development of an embedded board for construction of smart factory. The proposed embedded board for construction of smart factory consists of main module, ADC module, I/O module. Main module is a main calculating device which includes communication pard that allows interface with external device with using industrial protocol and is ported operating system makes board operating into. ADC module takes part in transferring digital signal has converted from electrical signal to the main module from the external sensor which is installed on the field. I/O module is an input and output module which transfers to the main module about a status, alarm, command signal of field device and it has a function that blocks external noises from field device with isolation circuit into it. In order to evaluate the performance of the proposed embedded board for construction of smart factory, it has been tested by an authorized testing institute. As a result, quantity of interacting protocol was 5, speed of hardware clock synchronization was under 10us and operating time of battery without source power was over 8 hours. It produced the same result as the world's highest level.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.975_976
• /
• 2009

본 논문에서는 차량용 배터리의 내구 수명 분석을 위한 효율적인 분석 절차와 프로세스를 제안하였다. 분석 프로세스는 배터리의 내구성을 분석하기 위한 기본적인 배터리 특성을 통해 시험에서 얻어진 파라미터를 구하고 배터리 외부 온도 영향에 따른 내부 전해액의 변화 특성 및 배터리의 내구 수명 특성을 통한 상관관계를 도출할 수 있다. 본 논문에서 필드에서 측정한 데이터를 분석하고 이와 동일한 환경을 실험실에서 모사해 냄으로써 필요한 실험 데이터를 얻어 배터리의 내구 특성을 분석하고 배터리 수명을 예측하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.5
• /
• pp.12-24
• /
• 1994

최근 수년간에 걸쳐 이루어진 센서기술의 발달과 컴퓨터를 이용한 데이타 처리능력의 혁신적인 발전은 대형의 복잡한 시스템을 실시간으로 운용하는데 있어서 막대한 양의 정보를 적절히 처리할 수 있는 기술을 요구한다. 예를 들어, 제철 또는 화학공장 공정제어에 있어서 여러 단계의 복잡한 공정의 상태에 관련된 정보는 다양한 센서들에 의하여 감지되어 제어컴퓨터에 전달된다. 또한 제어컴퓨터에서 생성되는 데이타는 자동화장비들의 각 구동장치로 분배된다. 이와 더불어 전체공정의 운용 및 관리와 제품의 품질 검사 및 시험에 관련된 데이타들도 적절히 전송되어야 한다. 또한 공장의 생산자동화 시스템에서도 수많은 로봇, PLC, CNC,AGV,켠베이어, 자동창고 등 자동화장비관련장비들의 시간적,공간적인 작업상태와 작업환경에 대한 무수한 정보들은 다양한 센서들에 의하여 감지되어 제어컴퓨터로 전달되어야 한다. 이러한 막대한 양의 데이타들을 적시에 수집하여 가공한 후 적시, 적소에 분배해 줄 수 있는 데이타 전송기술의 확보는 미래의 첨단생산시스템으로 인식되는 CIM(Computer Integrated Manufacturing)및 분산제어시스템(Distributed Control System)의 구축을 위한 선결과제라 할 수 있다. 이러한 문제들은 발전소, 최신예 항공기와 인공위성 등과 같이 고도의 제어기능과 매우 높은 신뢰도를 요구하는 시스템들에서도 마찬가지로 제기된다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.12
• /
• pp.114-119
• /
• 2008

In this paper, a home network gateway has been developed, which supports the ZigBee and power line communication methods at the same time. A conversion protocol for smooth information exchange between ZigBee module and power line communication module have been implemented on the gateway, and the performance and reliability of the gateway have been evaluated as good through field tests. The gateway can support various home networks.

• 한국정보통신설비학회:학술대회논문집
• /
• 2005.08a
• /
• pp.128-132
• /
• 2005

각종 신호의 디지털 전송에서 Modulation기법에 의해 발생되는 PAPR(Peak to Average Power Ratio)은 전송 신호의 선형성을 보장하기 위하여 고출력 증폭기의 Back-off를 요구하게 된다. 이러한 고출력 증폭기의 Back-off요구로 인하여 원하는 출력에 비해 높은 전력소모량이 필요하여 대출력을 요구하는 장비의 소형화는 크게 제한을 받게 된다. 본 논문에서는 PAR을 감소하기 위한 CFR(Crest Factor Reduction)기법을 위성 DMB용 Gap Filler에 적용하여 장비 크기를 소형화한 사례에 대해 소개한다. 전송신호의 품질에 대한 영향을 최소화 하면서 PAR을 감소하기 위한 방안을 위해 도입된 Simulation 결과와 CFR기법을 적용한 장비에 대한 성능시험 결과 및 필드 테스트 결과에 대해 소개한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.05a
• /
• pp.280-281
• /
• 2023

본 논문에서는 FHIR 인터페이스를 통해 환자에 대한 정보를 사전에 습득하여 효율적인 응급구조 활동을 지원하기 위해 FHIR를 통해 제공되는 정보의 특성을 파악하고 수집 방법을 설계한다. 환자정보를 포함한 의료정보 시스템과 연동된 FHIR 서버에서 Condition 자원을 통해 환자의 현재 유병상태를, MedicationRequest 자원을 통해 약처방 정보를 습득할 수 있는데 HAPI 및 Synthea에서 제공하는 시험 데이터를 통해 필요한 필드를 얻는 과정을 구현한다.

• Journal of Broadcast Engineering
• /
• v.19 no.3
• /
• pp.372-384
• /
• 2014

DTV field tests have been performed to measure field strength and to check reception ratio on indoor and outdoor sites. They use an antenna of 9m to measure DTV signal in case of outdoor measurement on the road. Modern skyscrapers require the analysis of vertical-directional wave propagation by measuring vertical-directional DTV signal. Even if the field strength is above the reception threshold of $43dB{\mu}V/m$, the reception is impossible in case of strong multi-path or high impulse noise. So, vertical-directional field measurement is essential in environment of tall buildings. In this paper, we developed an octo type multi-copter to measure vertical-directional DTV signal level. A compact and portable DTV signal level meter, an antenna, a microwave transmitter for data transmission, and a recording equipment are equipped in the multi-copter. Three different sites are selected to test the measurement system. Developed measurement system using the multi-copter is very useful in measuring vertical-directional DTV signal, especially in apartments, non-accessible area by vehicles, and forbidden areas.