• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.04a
• /
• pp.97-99
• /
• 2000

대기오염물질의 침적현상은 대기 중에 부유하는 독성물질의 거동에 영향을 미치고 대기오염물질이 대기로부터 수면 또는 지표로 이동하는 주요 경로이며 이로 인하여 식물성장에 대한 피해 및 토양오염, 수질오염을 야기 시키는 둥 환경에 주는 영향으로 인하여 그 중요성과 관심이 증가되고 있다. 이러한 대기침적현상에 관한 최근 연구결과에 의하면, 미국의 5대호에 있어서 납 총량의 95% 이상이 대기로부터 기여되고 있으며 미국 동부의 체사피크만 (Chesapeake bay)의 경우 적조현상의 원인물질로 알려진 질소에 대한 대가로부터 기여도가 25 ~ 40%에 이르고 있는 것으로 보고되고 있다. (중략)

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.356-356
• /
• 2012

InGaN/GaN로 제작된 Blue chip의 파장에 따른 백색 LED의 성능 저하를 전기적, 광학적 특성을 고려하여 조사하였다. 4가지 파장으로 제작된 백색 LED Sample들은 60 mA, 75 mA, 90 mA의 주입 전류로 장 시간동안 스트레스를 주었다. 또한 형광체가 없는 상태와 있는 상태를 구분하여 패키지의 감쇠 특성을 확인하였다. Blue 피크 파장 437 nm, 주입전류 90 mA, 형광체가 있는 상태와 형광체가 없는 상태에서 패키지의 출력 광세기는 각각 20%, 36%까지 감소하였다. 이는 Blue Chip에서 출력되는 단파장이 페키지 몰드의 노화(황변)현상에 직접적인 영향을 주기 때문이다. 전기적 특성은 Blue chip의 파장영역에 의존하지 않고, 스트레스 시간에 따른 LED내부 저항이 커지는 현상을 확인하였다. 따라서 InGaN/GaN로 제작된 백색 LED의 장 수명을 얻기 위해서는 Blue chip의 출력 파장 영역과 페키지 몰드 재료 특성의 신뢰성 관계가 중요하다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.38-38
• /
• 2014

SPCC강판상에 PVD 스퍼터링법으로 Zn계 박막을 제작하였고, Zn계 박막의 결정구조와 표면특성에 미치는 산소의 영향을 해석하였다. 실험결과, 진공쳄버 내부에 있는 대부분의 Zn 이온중에서 Mg 이온이 증가할 때, Mg의 증발 및 흡착으로 인한 Zn의 증착핵 성장 억제와 Zn-Mg 금속간 화합물의 분산분포는 Zn-Mg막의 결정입자의 크기를 작게 만들었다. 산소가 쳄버내부에 존해하는 경우에는 XRD 피크는 상대적으로 감소되면서 브로딩하게 나타났다. 또한, 표면특성인 몰포로지의 경향을 분석해 보면 결정입도는 작아지는 현상을 보였다. 이것은 챔버 내부에 존재하는 잔류가스인 산소가 Zn 및 Mg과 같은 증착입자와 결합 및 흡착이 이루어지고, Zn 및 Mg 등이 증착핵의 마이그레이션 효과를 감소시켜 결정입도의 크기가 감소되는 것으로 나타났다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.2
• /
• pp.173-179
• /
• 1999

The effect of the surface activation treatment on the crystallization of the amorphous silicon film was investigated. The amorphous silicon film was deposited on the silica substrate with LPCVD technique. Wet blasting with silica slurry or exposure with Nd:YAG laser beam was applied on the amorphous silicon film before annealing for the crystallization. For the analysis of the crystallinity, XRD, Raman, and SEM were employed. In this investigation, the prior surface activation treatment like silica wet blasting or Nd:YAG laser beam exposure before annealing for the crystallization were found to be effective in the enhancement of the crystallization. It is believed that these treatment lower the activation energy required for the crystallization of the amorphous silicon film.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.21 no.2
• /
• pp.137-141
• /
• 1985

In this paper, the author investigate viscous effects on the characteristics of TP620 hydrofoil. The pressure distribution on the foil section in non-cavitating flow should be considered its characteristics of displacement thickness due to viscous effects. Theoretical potential theory, which neglects viscous effects do not agree with this analysis, especially at leading edge region of the foil. And, the efficiency of TP620 hydrofoil considering viscous effects is a little lower than that of the foil, which neglected viscous effects.

• Journal of the Korean Society for Railway
• /
• v.11 no.4
• /
• pp.357-363
• /
• 2008

This study investigates the durability of carbon/epoxy composites for use on train car bodies under a salt water spray environment. Salt water solution with 5% NaCl, similar to natural salt water, was used for the salt water environmental tests. The specimens were obtained from a composite panel consisting of an epoxy matrix reinforced with T700 carbon fabric. The specimens were exposed to the salt water environment for up to 12 months. Mechanical tests were performed to obtain tensile properties, flexural properties, and shear properties. Dynamic mechanical analysis was used to measure such thermal properties as storage modulus, loss modulus, and tan $\delta$. Also FT/IR tests were conducted to investigate changes in chemical structure with exposure. The results revealed that fiber-dominated mechanical properties were not affected much by exposure time, but matrix-dominated mechanical properties decreased with increasing exposure time. Storage modulus was not very sensitive to exposure time, but glass transition temperature was affected, slightly decreasing with increasing exposure time. Although the peak intensity of FT/IR curves was affected slightly by exposure time, the peak shape and peak location of FT/IR curves were not noticeably changed. Carbon/epoxy composites used for this study were relatively stable to the salt water environment.

• Journal of the Korean Ceramic Society
• /
• v.41 no.5
• /
• pp.417-424
• /
• 2004

Polycarboxylate type superplasticizers (PCA) with different graft chain (Polyethylene oxide) length were synthesized by Methoxypoly (ethyleneglycol)monomethacrylate (MPEGMAA) and methacrylic acid (MAA). The effects of PCA on the hydration of Ordinary Portland Cement (OPC) were investigated by Fourier Transform Infrared Spectroscopy (FT-IR), X-Ray Diffraction (XRD) and Differential Scanning Calorimetry (DSC) techniques. The effect of graft chain length of PCA on the hydration of OPC was different at early age, but, at long age, was similar. The ratio of relative peak intensity, (I［001］/I［101］), of Ca(OH)$_2$ compared with OPC also was reduced by PCA addition.

• Korean Journal of Optics and Photonics
• /
• v.24 no.2
• /
• pp.58-63
• /
• 2013

A theoretical analysis of the impact of rise time of a Q-switch on the output pulse performance is carried out in an Ytterbium-doped actively Q-switched fiber laser. The finite difference time domain (FDTD) method is used to numerically simulate the Q-switched fiber laser. It is shown that stable Gaussian-like pulse shape can be generated when the Q-switch rise time is increased and pulse repetition rate is enlarged.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.4
• /
• pp.345-352
• /
• 2010

The objective of this paper is to explore the short-term variability of water temperature and chlorophyll a (Chl-a) derived from in-situ and satellite data (NOAA, Sea WiFS and QuikScat) in the upwelling region of the southeastern part of Korean Peninsula in June and August, 2007. Particularly we focused on the spatial variability of sea surface temperature(SST) and Chl-a in the East Korean Warm Current region. In the results of the in-situ data, the peaks of Chl-a in june was shown at a depth of 50m The peaks of Chl-a in August was shown at a depth of 10m at the stations 4 and 5 near the land, and a depth of 30m at the other stations. The Chl-a concentrations in August were also lower than those in june except for station 5. As a result, the peaks of Chl-a in August occurred at a depth of 20~40 m shallower than those of Chl-a in june. This indicates that the nutrient-rich water within the mixed layer depth may be immediately supplied by the coastal upwelling, which is due to the southerly component of wind. The relationship between SST and Chl-a showed a negative correlation, and the high concentration of Chl-a occurred in the cold water area. The southerly wind and the East Korean Warm Current influenced a remarkable offshore movement of the cold water and Chl-a near the coastal area.

• Analytical Science and Technology
• /
• v.15 no.4
• /
• pp.373-380
• /
• 2002

Humic and fulvic acids present in soil of different depth were extracted and their characteristics were analyzed as a basic study to evaluate the effect of humic substances on the behaviour of radioactive elements deposited on soil. Molecular size distribution of the humic and fulvic acids was measured by stirred cell ultrafiltration technique and the structural informations were obtained from their UV-Vis., IR and synchronous fluorescence (SyF) spectral analysis. Main molecular size ranges of the soil 1) humic and fulvic acids were 30~100 kDa (46~56%) and 10~30 kDa (33~43%) respectively, and their overall molecular sizes were found to became smaller with increasing the soil depth. Absorptivities measured at 280 nm in the UV-Visible spectra of humic acids were 1.4~1.5 times higher than those of fulvic acids, and increased with increasing the soil depth. SyF spectral data showed two distinct peak components having maximum peak positions of 428 nm (type I) and 498 nm (type II) for the soil humic and fulvic acids. From the analysis of the peak components, it was found that humic molecules are mainly made up of aromatic compounds corresponding to longer wavelength (type II), and the molecular components increased with increasing the soil depth. Analysis of IR spectral data indicated that the humic molecules contain a higher relative concentration of carboxylic groups than those of fulvic molecules, and the carboxylic group contents are seen to increase as the soil depth increase.