• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.3
• /
• pp.301-306
• /
• 2010

In this paper, a SIT(Source Independent Tree) method for ray tracing is proposed to enhance the efficiency of tree construction with reuse of sub tree in urban environment, As the SIT method is applied, the decrease of the number of nodes for picocell and microcell simulations is 100 times. And 88~98 % of the total nodes are reused with change of location of signal source from an analysis of node reuse efficiency. Therefore the proposed SIT method is useful in performance enhancement of ray tracing, especially, for multiple antenna simulation like as MIMO system and cell planning.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.7
• /
• pp.100-111
• /
• 2003

The HAUSAT-1(Hankuk Aviation University SATellite-1) will orbit at the altitude of 650km-800 km with 65 or 98 degree inclination angle. The effects of magnetic field and Earth gravity are more predominant than other space disturbances because the HAUSAT-1 will be positioned in LEO(Low Earth Orbit). The HAUSAT-1 design implements a magnetic control system and gravity-stable system which implement the solar panel deployment system. The simulation using MATLAB was performed to make sure the attitude stability of HAUSAT-1, which is based on the 8th order magnetic field model and non-linear equations of disturbances and the HAUSAT-1 attitude. The stability is investigated for two different HAUSAT-1 configurations and attitude which are affected by disturbances through simulation. The results for gravity-gradient stable and non gravity-gradient stable system are compared. Methodology of attitude stabilization was explored to develop an effective attitude control system for the HAUSAT-1 using magnetic torquers.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.45-48
• /
• 2004

RFID(Radio Frequency Identification) which is emerging from a change in digital convergence paradigm and recently rapidly advancing throughout the overall society is the core technology based on Ubiquitous network. In other words, This is a technology to identify the information of the object and recognize the situation by attaching electrical tag to an object and using Reader that can read the information of the object. With the emergence of the technology, it has turned the existing maintenance of the product into the network and intelligence of the product control by using the bar cord to maintain the product and will lead a revolution throughout overall society by affecting the fields of distribution and product maintenance as well as those of medicines, chemicals and food which the electrical tag can be attached to. this paper shows that utilizing the Bluetooth which is a local wireless telecommunication in the standalone imbedded system can implement the piconet configuration among the Readers and the data telecommunication with the main server

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.3
• /
• pp.1-10
• /
• 2006

It is widely accepted that the coverage with high user densities can only be achieved with small cell such as micro- and pico-cell. The smaller cell size causes frequent handovers between cells and a decrease in the permissible handover Processing delay. This may result in the handover failure. in addition to the loss of some Packets during the handover. In these cases. re-transmission is needed in order to compensate errors, which triggers a rapid degradation of throughput. In this paper, we propose a new handover scheme in the next generation mobile communication systems, in which the handover setup process is done in advance before a handover request by predicting the handover cell based on mobile terminal's current position and moving direction. Simulation is focused on the handover failure rate and Packet loss rate. The simulation results show that our proposed method provides a better performance than the conventional method.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.3
• /
• pp.277-285
• /
• 2019

In this study, effective cosmetic raw material weighing and bulk manufacturing management system were constructed by using bar code or quick response code (QR code) and database. Raw material labels and weighing labels for bulk manufacturing were published in web environment using the information entered in the database using ScriptX, a print component of Medi&Co. By checking the weighing and manufacturing process by using scanner, tablet and PC, it was possible to remarkably improve the product error caused by erroneous amount or misapplication which is the most cause of error in the production of cosmetic bulk. In conclusion, applying a database that utilizes bar code and QR code to cosmetics manufacturing can reduce the various problems in the process, thereby improving quality control and productivity of cosmetics.

• Tribology and Lubricants
• /
• v.37 no.5
• /
• pp.172-178
• /
• 2021

An injector is a mechanical device present inside the engine. Its main function is to supply an appropriate volume of fuel into the combustion chamber, which is directly related to the overall engine efficiency of a car. During the operation of an injector, a magnetic force lifts the parts of the injector from closed position to open position which generates a horizontal force on the needle. The horizontal force acts on a different position from that of the center of mass of the needle. Therefore, this causes eccentricity in the needle and the generation of a tilting motion during the lifting operation which can result in wear. However, appropriate selection of clearances for these parts can prevent wear. In this study, lubrication analysis is conducted to determine the optimum clearance of parts with sliding motion inside the injector. The height functions are derived considering the dynamic behavior and relative velocity of the parts. Using the derived height function, the pressure profiles are calculated for the lubricated surfaces from the Reynolds' equation. Subsequently, the fluid reaction forces are calculated. The equations of motions are applied to the fluid reaction forces and external forces are solved to calculate the minimum film thickness between each part with variation in the clearances. Finally, the optimum clearances are determined. The effect of the clearances on the behavior of the moving parts is presented and discussed.

• Journal of Digital Convergence
• /
• v.19 no.1
• /
• pp.373-378
• /
• 2021

This study is a study on user experience design of Meal Kit product information. The purpose of this study is to derive the product information necessary for the purchaser and the necessity for the convenience of use, and to propose an improvement plan. When purchasing Meal Kit products, two types of domestic Meal Kit brands, Peacock and Fresheasy, were compared and analyzed for information on nutrition intake, package design, and environmental issues. As a research method, a questionnaire survey was conducted by deriving 7 factors for purchasing Meal Kit products through literature research and prior research. Proceeded. As a result of the study, the factors that satisfy buyers were in the order of cooking process, food, taste/nutrition, package, convenience, price, and information, and overpacking was also revealed as a problem. Through this, it was possible to derive improvements and develop plans for the Meal Kit product. It is expected that this study will help improve the dietary life of One person households and develop Meal Kit products in the future.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.20-20
• /
• 2022

최근 국내 기후변화와 산업화로 인한 오염물 배출량 증가로 인해 하천 및 호소에 남조류 과대 성장이 빈번히 발생한다. 과거에 비해 녹조현상의 빈도가 잦아졌으며, 지속기간이 증가하였다. 조류 발생 시 현장에서 채수한 샘플을 통해 검경 및 chlorophyll-a 분석을 진행하여 조류의 정성·정량적 평가를 진행한다. 이러한 분석결과는 녹조 발생에 대한 기초자료로 활용되고 있다. 하지만 현장 시료 샘플을 통한 조류 검경의 경우 단일지점에 대한 분석으로 인해 하천 및 호소의 전체적인 대표성을 나타내기엔 한계가 있고, 많은 인력과 시간이 소요된다. 또한 chlorophyll-a는 녹조류와 높은 관련성이 있어 유해남조류에 대한 집중 분석에는 한계가 발생한다. 이러한 한계점을 통해 국내·외로 조류 연구에 분광 스펙트럼을 활용한 원격탐사 기법 적용되고 있으며, 남조류 농도를 분석하기 위해 남조류의 보조 색소인 phycocyanin을 활용한 연구가 진행되고 있다. 본 연구에서는 분광스펙트럼을 활용한 phycocyanin 분석을 진행하였다. 분광 스펙트럼을 측정하기 위해 점(point) 단위의 고해상도 분광방사계를 활용하였으며, phycocyanin 측정을 위해서 형광 센서를 활용하였다. 현장에서 형광센서 및 분광방사계를 동시에 측정하여 데이터를 취득하였으며, 분광 스펙트럼 특성상 노이즈 및 이상치가 발생하기 때문에 전처리 과정을 통해 이를 보완하였다. phycocyanin 분석을 위해 다중 스펙트럼을 활용한 분광지수를 활용했으며, 이를 통해 phycocyanin 분석에 있어 최적의 분광지수를 제시하고자 한다. 본 연구 결과는 고해상도 점(point)단위 분석으로 향후 선단위, 면단위 하천 조류-스펙트럼 분석에 있어 기초자료로 활용될 것으로 판단된다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.5
• /
• pp.362-368
• /
• 2023

In this paper, we presented the characteristics of the impulse signal which is applicable to the ultra-wideband antennas. In general, the width of the impulse has around sub nano or pico seconds in the time domain, where it corresponds to the wideband in the frequency domain. We confirmed by experiment that the impulse has around 130ps of the pulse width and bandwidth of 4GHz when 10MHz of sine wave excited as an input pulse. The fidelity factor was calculated in the time domain and -10dB bandwidth in the frequency domain was investigated for resistively loaded dipole antennas with different resistance per unit length. The received impulse signal through the wideband antennas is confirmed in the time and frequency domains that received pulse is to be similar to the generated impulse. The fidelity and bandwidth of the quantity value are 0.98 and 3.4GHz, respectively.

• Journal of Korean Society on Water Environment
• /
• v.39 no.6
• /
• pp.451-464
• /
• 2023

Harmful cyanobacterial monitoring is time-consuming and requires skilled professionals. Recently, Phycocyanin, the accessory pigment unique to freshwater cyanobacteria, has been proposed as an indicator for the presence of cyanobacteria, with the advantage of rapid and simple measurement. The purpose of this research was to evaluate the correlation between the harmful cyanobacterial cell density and the concentration of phycocyanin and to consider how to use the real-time water quality monitoring system for algae bloom monitoring. In the downstream of the Nakdong River, Microcystis spp. showed maximum cell density (99 %) in harmful cyanobacteria (four target genera). A strong correlation between phycocyanin(measured in the laboratory) concentrations and harmful cyanobacterial cell density was observed (r = 0.90, p < 0.001), while a weaker relationship (r = 0.65, p < 0.001) resulted between chlorophyll a concentration and harmful cyanobacterial cell density. As a result of comparing the phycocyanin concentration (measured in submersible fluorescence sensor) and harmful cyanobacterial cell density, the error range increased as the number of cyanobacteria cells increased. Before opening the estuary bank, the diurnal variations of phycocyanin concentrations did not mix by depth, and in the case of the surface layer, a pattern of increase and decrease over time was shown. This study is the result of analysis when Microcystis spp. is dominant in downstream of Nakdong River in summer, therefore the correlation between the harmful cyanobacteria density and phycocyanin concentrations should be more generalized through spatio-temporal expansion.