• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.45-50
• /
• 1995

본 연구에서는 기존에 널리 사용되고 있는 스카이훅 제어 알고리즘(skyhook control algorithm)[3]을 바탕으로 확장 개발된 모드 스카이훅 제어(mode skyhook control) 개념 및 주파수 감응식 제어(frequency dependent control)개념[4][5]을 실용화하기 위하여 응답속도가 20msec이하의 비교적 빠른 응답 속도를 갖는 전자기식 작동기 (electro-magnetic actuator)에 의해 가변되는 4단 반능동형 가변 댐퍼 시스템을 개발한 후, 다음과 같은 성능의 향상을 시험결과를 통하여 보이고자 한다. -저속에서의 승차감 향상과 고속에서의 주행 안정성 향상 -커브 주행 또는 급격한 핸들 작동시의 롤안정성 (rolling stability) 향상 -제동 및 급발진시의 차체 피칭 운동 방지 (anti-dive, anti-squat)

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.727-730
• /
• 2011

본 논문에서는 3차원 자기부상열차에 대한 열차-가이드웨이 상호작용 해석기법을 제시하고자 한다. 수직 및 수평방향 변위, 피칭, 롤링 그리고 요잉에 대한 자유도를 각 보기와 차체에 대해 고려하여 총 25자 유도 자기부상열차에 대한 운동방정식을 유도하였다. 제어방식으로는 UTM01에 적용된 제어기법을 이용하였고, 궤도 틀림을 고려하기 위하여 미국 FRA에 적용하고 있는 궤도 불규칙성에 대한 밀도 스펙트럼 함수를 이용하여 조도를 생성하였다. 같은 조건하에 2차원 모델과 3차원 모델의 동적응답 결과를 비교하여 타당성을 확인하였고, 2차원 모델에서 고려할 수 없는 수평방향 조도를 도입하였을 때 수직방향 부상공극에는 두드러진 영향을 미치지 않았으나, 수평방향 부상변위에 있어서 중요하게 작용함을 확인하였다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.2 no.2
• /
• pp.61-69
• /
• 1999

A dynamic stability test was performed to determine dynamic stability derivatives for the pure pitching motion of air-to-ground missile model in the low speed wind tunnel. The free vibration technique was employed to acquire oscillation characteristics of the model for damping coefficients. Damping coefficients are obtained by the method of logarithmic decrement. Results show good damping effects and stability capability at Mach numbers 0.1 and 0.2, with the angle of attack ranging from -15 to +20 degrees.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4D
• /
• pp.671-678
• /
• 2006

In this study, to describe vehicle-structure dynamic interaction phenomena with 1/4 vehicle model, nonlinear Hertzian contact spring and nonlinear contact damper are adopted. The external loads acting on 1/4 vehicle model are selfweight of vehicle and geometry information of running surface. The constraint equation on contact surface is implemented by the Penalty method with stabilization and the reaction from constraint violation. To describe pitching motion of various vehicles two types of the displacement constraint equations are exerted to connect between car bodies and between bogie frames, i.e., the rigid body connection and the rigid body connection with pin, respectively. For the time integration of dynamic equations of vehicles and structure Newmark time integration scheme is adopted. To reduce the error caused by inadequate time step size, adaptive time-stepping technique is also adopted. Thus, it is expected that more versatile dynamic interaction phenomena can be described by this approach and it can be applied to various railway dynamic problems with low computational cost.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.6
• /
• pp.653-663
• /
• 2012

The study considers the high maneuverability flight and path optimization is conducted to investigate the appropriate generation of the lift and thrust considering the angle of the stroke plane. The path optimization problem is defined according to the various purposes of the high maneuverability flight. The flying purposes are to maximize thrust force, lift force and both lift and thrust forces. The flapping motion of the airfoil is made by a combined sinusoidal plunging and pitching motion in each problem. The optimization process is carried out by using well-defined surrogate models. The surrogate model is determined by the results of two-dimensional computational fluid dynamics analysis. The Kriging method is used to make the surrogate model and a genetic algorithm is utilized to optimize the surrogate model. The optimization results show the flapping motions for the high maneuverable flight. The effects on the generation of lift and thrust forces are confirmed by analyzing the vortex.

• Journal of Advanced Navigation Technology
• /
• v.21 no.5
• /
• pp.450-458
• /
• 2017

This paper presents dynamic modelling and simulation study on attitude/altitude control of an insect-mimicking flapping micro aerial vehicle during hovering. Mathematical modelling consists of three parts: simplified flapping kinematics, flapping-wing aerodynamics, and six degree of freedom dynamics. Attitude stabilization is accomplished through linear quadratic regulator based on the linearized model of the time-varying nonlinear system, and altitude control is designed in the outer loop using PID control. The performance of the proposed controller is verified through numerical simulation where attitude stabilization and altitude control is done for hovering. In addition, it is confirmed that the attitude channel by periodic control is marginally stable against periodic pitching moment caused by flapping.

• Aerospace Engineering and Technology
• /
• v.6 no.1
• /
• pp.35-44
• /
• 2007

In this study was made the flutter analysis for the export model of Firefly(Bandi-ho), the small canard aircraft. Stiffness model based on internal load generation finite element model was generated. Mass model based on the weight DB for weight control was generated. Aerodynamic model based on Doublet Lattice Method was generated. Preliminary flutter analysis was made. Based on it, major vibration modes are identified and experimentally obtained via the ground vibration test. The obtained normal mode frequencies were used to correlate the finite element model. Flutter analysis was made again and major flutter mechanisms were summarized. The most important flutter root was identified as a coupled root between rigid body roll mode and anti-symmetric wing pitching mode.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.11
• /
• pp.1-8
• /
• 2006

A steady prediction method is presented to compute dynamic damping coefficients for axisymmetric projectiles. Viscous flow analysis is essential to the steady method using a zero-spin coning motion in the inertial coordinate frame. The present method is applied to compute the pitching moment and the pitch-damping moment coefficients for the Army-Navy Spinning Rocket. The results are in good agreement with the parabolized Navier-Stokes data, range data, and unsteady prediction data. Predictions for Secant-Ogive-Cylinder configurations are performed to investigate effects of afterbody geometries. To investigate the geometrical effect and flow physics, the longitudinal developments of the coefficients are examined in detail.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.12
• /
• pp.1153-1161
• /
• 2010

An efficient solution method for harmonic balance techniques with Fourier transform is presented for periodic unsteady flow problems. The present partially-implicit harmonic balance treats the flux terms implicitly and the harmonic source term is solved explicitly. The convergence of the partially Implicit method is much faster than the explicit Runge-Kutta harmonic balance method. The method does not need to compute the additional flux Jacobian matrix from the implicit harmonic source term. Compared with fully implicit harmonic balance method, this partial approach turns out to have good convergence property. Oscillating flows over NACA0012 airfoil are considered to verify the method and to compare with results of explicit R-K(Runge-Kutta) and dual time stepping methods.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.7
• /
• pp.9-17
• /
• 2005

The wake patterns and thrust characteristics of dual flapping airfoils in a biplane configuration are investigated using an unsteady panel method. To trace complicated wake shapes behind airfoils, a core addition scheme, a vortex core model, and the fourth order Runge-Kutta convection scheme are employed. Present results are verified by comparing them with flow visualization, exact solution and published computed results. The thickness and camber of thick airfoils has an effect of decreasing thrust. The airfoils produce maximum thrust when the phase angles between plunging and pitching motions are both 90 and 120 degrees. Thrust increases as the plunge velocity is increased, which is also found as the pitch amplitude is stepped up. Thrust decreases when the distance between the airfoils is less than 0.6c.