• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.3
• /
• pp.44-50
• /
• 2006

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.10
• /
• pp.1841-1852
• /
• 1992

With the wide application of fiber-reinforced composite material in aircraft, space structures and robot arms, the design and manufacture of composite joints have become a very important research area because they are often the weakest areas in composite structures. In this study, the effects of the adhesive thickness, residual thermal stress on the torque capacity of the tubular single lap joints were studied. The torque capacity of the adhesive joints were experimentally determined and found to be inversely proprotional to the adhesive thickness. In order to match the experimental results to the theoretical analyses, the elastic-perfectly plastic material properties of the adhesive were used in the closed form solution. Also, the residual thermal stress of the joints were calculated by the finite element method and it was proved that the residual thermal stress could play an important role in the thick adhesive joints.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.5 s.176
• /
• pp.1203-1214
• /
• 2000

In this paper, a failure model for co-cured steel-composite tubular single lap joints has been proposed incorporating the nonlinear mechanical behavior of steel adherends and different failure mode s such as steel adherend failure and composite adherend failure. The characteristics of the co-cured steel-composite tubular single lap joint were investigated with respect to the test temperature, the stacking sequence of composite adherend, the thickness ratio of steel adherend to composite adherend, and the scarf ratio of steel adherend. Thus, the optimum design method for the co-cured steel-composite tubular single lap joint was suggested.

• Journal of the Society of Disaster Information
• /
• v.15 no.2
• /
• pp.259-267
• /
• 2019

Purpose: In this paper adhesive-bonded cylindrical lap joints are analyzed by assuming that the adherends are elastic and the adhesive is linearly viscoelastic. Method: The distribution of the stresses in the adhensive is evaluated using the Finite Element Method. Nuverical examples for identical and different adherends bonded through a four parameter viscoelastic solid adhesive are illustrated. Results: The stress distribution in the adhesive layer with respect to time is shown. The stress distribution in the adhesive layer with respect to time is shown. The results are also shown that adherend thickness and elastic modulus give effect on the normalized stress. Conclusion: In this study, the stress distribution of the adhesive layer of the wrapped cylindrical body considering the viscoelasticity of the adhesive layer was numerically analyzed by using a four - element elastomer model.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.04a
• /
• pp.94-97
• /
• 2005

The strength of aluminum 7075 and carbon composite hybrid joints was studied for adhesive, bolt, and the adhesive-bolt combined joints. Several hybrid joint specimens were tested to get the failure load and modes for three types of the joints. Adhesive Cytec EA9394S was used for aluminum and carbon bonding. Failure load of the adhesive-bolt combined joint was 94 % of the sum of the failure load of the separately bonded and bolted joints. Hybrid joint also showed more stable failure behavior than the simple adhesive or bolted joint.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.785-788
• /
• 2012

본 논문에서는 접착제로 접합된 DCB 구조체의 피로 해석을 수행하였다. 두께가 25및 40 mm인 두 모델들의 피로수명과 피로손상의 해석 결과를 비교해보면, 두께 25 mm인 모델이 두께 40 mm인 모델에 비하여 수명과 손상이 불리한 것으로 나타났으며 불규칙 피로하중에서는 'SAE transmission'에서 가장 불리한 값을 나타냈다. 또한 'SAE transmission'에서 가장 안정한 경향을 보이고 있고 상대적인 손상으로서 약 1.1에서 1.8 % 정도로 가장 작은 것으로 나타났다. 본 연구에서 얻어진 해석 결과를 접착제로 접합된 실제 복합재 구조물에 적용시켜 피로거동을 분석하고 그 기계적인 특성을 파악할 수 있다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.4 no.3
• /
• pp.105-112
• /
• 1980

정현적 응력을 받고 있는 정탄성 결합부의 에너지 손실을 여러 가지 인자를 고려하여 구하였다. 탄성접착결합부의 해를 구하고 탄성해의 전단계수를 복소전단계수로 대치하여 점탄성 접착결 합부의 전단변형분포를 구하였다. 주어진 접착제의 최대강쇠현상은 접착제의 강성과 피접착물의 비를 증가 시킴으로서 얻을 수 있다. 구조적 결합부에서 파괴가 일어나지 않도록 피접착부와의 강성비를 결정함에 있어 주의를 요한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.4
• /
• pp.835-845
• /
• 1994

In this paper, the effects of the adhesive thickness and adherend roughness on the static and fatigue strengths of the adhesively bonded circular single lap joints has been investigated by an experimental method. The stacking sequence effect of the composite adherend on the static and fatigue strength and the fracture patterns of the adhesive failure were also observed. Since the circular single lap joint fails catastrophically beyond the static strength of fatigue limit, the tubular polygonal adhesively bonded joints such as triangular, tetragonal, pentagonal, hexagonal as well as elliptical joints were manufactured in order to give partial mechanical characteristics to the adhesively bonded tubular joints. These joints were tested both in static and fatigue modes. From the experimental investigations, it was found that the fatigue strength of the circular adhesively bonded joints was much dependent on the arithmetical average surface roughness of the adherends and the polygonal adhesively bonded joints had better fatigue strength characteristics than the circular adhesively bonded joints.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.7
• /
• pp.2865-2871
• /
• 2012

In this study, the fracture behaviour of DCB(double cantilever beam) specimen with aluminum foam composite materials is analyzed by simulation. By comparing the analysis results with two models of 25 mm and 40 mm, the model with thickness of 25 mm is weaker than 40 mm at fatigue life and damage. Two models are unfavorable at 'SAE Transmission' in case of nonuniform fatigue load and rainflow matrices are weakest at 'SAE Bracket history'. In damage matrices, the model with 25 mm of thickness is weaker than the model with 40 mm of thickness but the model with 40 mm of thickness relative damage possibility is higher than in case of 25 mm. As two models are safest at 'SAE Transmission', the relative damage becomes the lowest value from 1.1 to 1.8 %. The mechanical property can be investigated by applying these analyses results with the real composite structure bonded with adhesive and analyzing fracture behaviour.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.6
• /
• pp.678-684
• /
• 1996

Seed pelleting have successfully been used in many crops for better crop estab-lishment and for mechanizing seeding process for small crop seeds in developed countries. In this experiment various pelleting materials and binders were tested to get basic information on the shape, hardness and germination of pelleted seesds of cabbage (cv. Seoul Beachoo) and rice (cv: Ilpoom). PLL-11, paper clay, lime and coal ash were good materials to make smooth shape of the pellets with pel gel and AG-11 as binders, and PLL-ll as material and pelgel and AG-11 as binders were the best among them in consideration of shape and hardness together. The hardness of the pelleted seeds were differed with each other depending on both of the pelleting materials and binders. Pelleted cabbage seeds coated by pelgel as binder with different materials showed lower germination percentge than control in general, but the seeds pelleted by PLL-11 with different binders showed no restraint effects. When the cabbage seed pelleted by PLL-11 with pelgel as binder showed almost same germination percentage as control. The pH and electrical conductivity of the extract from bentonite and zeolite were very higher than other materials tested and germination percentage showed a little lower than control when the cab-bage seed planted on the filter paper damped with the extract. As a result, PLL-11 as pelleting material and pel gel and AG-11 as binder appeared the good materials to make pellets of cabbage seeds and rice in consideration of shape, hardness and germination.