• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.299-299
• /
• 2014

엔진블럭 사이를 왕복 운동하는 피스톤은 엔진블럭과의 마찰은 불가피한 상태일 수밖에 없으며 이렇게 된다면 엔진블럭 또는 피스톤의 파손, 변경이 있을 수밖에 없다. 피스톤에 대한 연구는 이러한 파손, 변경을 최소화시키기 위해서 내마모성, 내열성 그리고 내구성을 향상시키는데 목적을 두고 있다. 본 실험은 APS법으로 제작된 자기윤활복합코팅층을 준비해 레이저표면텍스처링을 넣어 마찰 실험을 하였다. 기지재로는 알루미나-지르코니아복합체를 사용하였고, 고체윤활제로는 $CaF_2$ 및 $BaF_2$을 사용하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.103-103
• /
• 2021

실험실에서의 파랑생성에 흔히 사용되는 피스톤형 조파장치는 수심에 따라 유속이 동일하게 생성된다는 제약이 있어 주로 천해파의 생성에 적합한 것으로 알려져 있다. 본 연구에서는 이러한 제약조건 없이 다양한 유속분포의 파형을 생성하는 수직 다열화된 조파장치가 개발되었다. 우선, 수심방향으로 이산화된 각 패들(paddle)의 스트로크에 대해 선형해석해가 유도되었다. 개발된 해석해는 패들의 수 및 유속분포에 따라 기존의 피스톤형 혹은 플랩형 조파장치 해석해로 근사함이 밝혀짐으로써 포괄적으로 활용될 수 있음이 확인되었다. 즉 개발된 해석해를 활용하면 선택적으로 피스톤형 및 플랩형 조파성능이 구현될 수 있다. 더불어 개발된 해석해는 다상유체의 내부파 생성에도 확정되어 적용가능함이 확인되었다. 다음으로, 개발된 조파장치를 수치적으로 구현하였다. 오픈소스 3차원 수치모형인 OpenFOAM 중, 두 개 이상의 불연속 및 비압축 유체에 대한 Navier-Stokes 방정식을 해결하는 수치 모듈을 사용하여 제안된 수직다열화된 조파장치의 성능이 평가되었다. 이때 동적격자모델(olaDyMFlow)을 결합함으로써 개발된 조파장치 움직임이 물리적 조파장치와 흡사하도록 수치적으로 구현하였다. 모의결과, 여러 개의 다열화된 패들이 층류 흐름 조건에서 심해파를 효율적으로 생성시키고, 중간수심 파랑조건에서는 제안된 조파장치가 상대적으로 덜 유리함을 확인할 수 있었다. 마지막으로 공기, 기름 및 물 등 3상의 흐름조건에서 단 두 개의 패들을 활용하여 각각 내부파 및 표면파를 생성하되었으며, 모의 결과는 해석해과 비교됨으로써 개발된 조파장치의 성능이 검증되었다.

• Journal of the Korean GEO-environmental Society
• /
• v.6 no.3
• /
• pp.5-15
• /
• 2005

A large diameter sampler that can take undisturbed samples from soft ground was developed by KICT. In order to compare the quality of samples taken by the sampler with those of the traditional piston sampler, a series of laboratory tests were performed. Samples were taken at different sites such as Incheon, Gimhae, Yangsan and Busan. The results showed that the values of unconfined compression strength, secant modulus, pre-consolidation pressure, undrained shear strength, and shear modulus exhibited higher in samples taken by the large scale sampler. Strains at shear failure and volumetric strains were low for the new sampler. It was proved from the comparison that better quality samples could be obtained by the KICT sampler.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.9
• /
• pp.875-882
• /
• 2011

In the present study, the imbalance in the axial-thrust and variation in the volumetric efficiency that occurred during the trimming of impeller diameter were investigated. The present study was focused on low-specific-speed multistage centrifugal pumps with a balancing piston as the balancing mechanism. The effects of impeller trimming on the axial-thrust balance in multistage pumps with horizontal and vertical axes were compared. The results showed that impeller trimming resulted in an additional axial-thrust acting in direction of pump inlet. The axial-thrust imbalance due to impeller trimming was more severe in the vertical-axis pumps than in the horizontal-axis pumps. The rate of increase in the diameter of the balancing piston, which was proportional to the rate of impeller trimming, was evaluated to maintain the axial-thrust balance. Furthermore, a simultaneous increase in the piston length and piston diameter was more effective for reducing the axial-thrust imbalance along with the volumetric efficiency drop.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.5
• /
• pp.421-427
• /
• 2005

A closed-loop sensorless stroke control system for a linear compressor has been designed. The motor parameters are identified as a function of the piston position and the motor current. They are stored in ROM table and used later for the accurate estimation of piston position. Also it was attempted to approximate the identified motor parameters to the 2nd-order surface functions. Some experimental results are given in order to show the feasibility of the proposed control schemes for linear compressors.

• Tribology and Lubricants
• /
• v.14 no.1
• /
• pp.64-69
• /
• 1998

A numerical analysis is carried out to study the effect of piston shape on the lubrication characteristics between the cylinder and piston in hydraulic piston pumps. The results showed that the shape of piston affect significantly the pressure distribution in the clearance, the lateral force acting on the piston and leakage flow through the clearance. Partially tapered piston is more effective than any other piston shapes because it reduces the possibility of hydraulic locking and improves the volumetric efficiency of the pump.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1065-1067
• /
• 2005

본 논문은 기존의 가스차단기와는 다른 차단동작을 가지는 새로운 형태의 가스차단기에 대한 특징을 검토한 것이다. 기존의 차단기에서 움직이던 가동부가 고정되고, 반대로 고정부이던 피스톤이 움직인다. 또한 기존 차단기의 고정부였던 고정 아크접점에 MDDM(Motor direct drive mechanism)을 채용하고, 반대편에 피스톤과 연결되는 소형 유압식 조작기를 설치함으로서 양방향 차단기(dual motion circuit breaker)를 구현하였다. 국내에서는 처음으로 MDDM을 실제 차단기에 적용한 사례로 판단되며, 기본 차단동자특성을 분석하여 향후 초고압 차단기에 적용할 수 있는 가능성을 검토하였다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1997.04a
• /
• pp.142-150
• /
• 1997

A numerical analysis is carried out to study the effect of piston shape on the lubricaton characteristics between the cylinder and piston in hydraulic piston pump. The shapes of piston affect significantly the pressure distributions, the lateral force and leakage flowrate. Composite shaped piston is more effective than other shapes which not only reduces the possibility of hydraulic locking but improves the volumetric efficiency of the piston pump.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.11
• /
• pp.1441-1446
• /
• 2012

An axial-piston-type hydraulic motor involves friction and leakage losses at the sliding parts, contact loss at the mechanism assembly parts, volumetric loss caused by the pressure drop, housing oil churning loss and compressibility from the hydraulic oil pipe resistance, etc. the friction and volumetric loss at the hydrostatic bearing between the piston shoe and the swash plate rotating at high speed and having an oil film gap of 8-15 ${\mu}m$ strongly affects the total efficiency of the hydraulic motor. In this study, a variable swash-plate-type hydraulic piston motor operating under a maximum pressure of 35 MPa, maximum speed of 2,500 rpm, and displacement of 320 cc/rev is tested to verify the optimal ratio of the hydrostatic bearing which is closely related to the hydraulic motor performance.

• Journal of the Korean Vacuum Society
• /
• v.16 no.4
• /
• pp.244-249
• /
• 2007

Deadweight piston gauge have been widely used as a fundamental instrument of precise pressure measurement because they are robust, accurate, potable, convenient to use and are able to realize the definition of pressure as farce per unit area. Basically, a deadweight piston gauge consists of a piston mounted vertically in a close-fitting cylinder filled with a gas and weights of known mass values. The pressure to be measured is applied to the base of the piston generating an upward vertical force, and is balanced by the downward gravitational force generated by weights. These instruments can be used to measure pressures above 10 kPa because of tare weights including piston. However, using a variable bell-jar pressure method and a newly developed weight loading device we can extend the application range of deadweight piston gauge to lower pressures. In this paper, we present the practical calibration results for two CDGs(Capacitance diaphragm gauge, MKS) with full-scale ranges of 1.33 kPa and 13.3 kPa, respectively.