• Industry Promotion Research
• /
• v.4 no.2
• /
• pp.1-8
• /
• 2019

This research is a technology for cutting the insulation of the busbar (busbar) installed in the distribution panel or switchboard, the results of the study, first, the cutting unit and frame of the cutting unit including a housing attached to the upper and lower cutters, respectively Busbar coating laser cutting machine is installed on the top, characterized by consisting of a stopper for adjusting the coating cutting distance of the busbar. Second, the frame is installed with the guide bar in the longitudinal direction at the top so as to be located at the rear side end of the table, the post is installed vertically at the front and rear at the upper middle part, respectively, and cut to the table at the outer side of the front post. It is characterized by the formation of holes. Third, the supporter is fixedly installed on the upper part of the guide bar arranged in the frame, and is characterized by consisting of a cylinder and a support plate. The meaning of this study is to prevent the safety accidents of workers, to improve the efficiency of cutting work, and to prevent the occurrence of scratches on the surface of the busbar.

• Korean Journal of Organic Agriculture
• /
• v.21 no.3
• /
• pp.413-422
• /
• 2013

This experiment was conducted to clarify the effect of double layer mulching on reducing the labor required to weed control and Leaf sheath training of the garlic cultivation. Six mulching methods(non-mulching, transparent P.E., rice hull+transparent P.E., sawdust+transparent P.E., rice straw+transparent P.E., black P.E. film+ transparent P.E.) were used for the experiment, and transparent P.E film was removed on April 10. Weed occurrence was in the order of black P.E. film< transparent P.E

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.3
• /
• pp.289-297
• /
• 2006

The Land Cover/Land Use Map have been constructed from 1998, which has hierarchical structure according to land cover/land use system. Level 1 classification Map have done using Landsat satellite image over whole Korean peninsula. Level II classification Map have been digitized using IRS-1C, 1D, KOMPSAT and SPOT5 satellite images resolution-merged with low resolution color images. Level II Land Cover/Land Use Map construction by digitizing method, however, is consuming enormous expense for satellite image acquisition, image process and Land Cover/Land Use Map construction. In this paper, the possibility of constructing Level II Land Cover/Land Use Map using hyperspectral satellite image of EO-1 Hyperion, which is studied a lot recently, is studied. The comparison of classifications using Hyperion satellite image offering more spectral information and Landsat-7 ETM+ image is performed to evaluate the availability of Hyperion satellite image. Also, the algorithm of the optimal band selection is presented for effective application of hyperspectral satellite image.

• Journal of Cadastre & Land InformatiX
• /
• v.44 no.2
• /
• pp.103-112
• /
• 2014

The objective of this study is to suggest the possibility on land cover classification using hyperspectal imagery on area which includes lands and waters. After atmospheric correction as a preprocessing work was conducted on hyperspectral imagery acquired by airborne hyperspectral sensor CASI-1500, the effect of atmospheric correction to a few land cover class in before and after atmospheric correction was compared and analyzed. As the result of accuracy of land cover classification by highspectral imagery using reference data as airphoto and digital topographic map, maximum likelihood method represented overall accuracy as 67.0% and minimum distance method showed overall accuracy as 52.4%. Also product accuracy of land cover classification on road, dry field and green house, but that on river, forest, grassland showed low because the area of those was composed of complex object. Therefore, the study needs to select optimal band to classify specific object and to construct spectral library considering spectral characteristics of specific object.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.06a
• /
• pp.9-10
• /
• 2012

This paper presents an observer to measure the lengths of cylinders of an underwater robot for harbour construction using a pressure sensor. In harbour constructing, we place heavy armour stones weighing over 2~3 tons on the surface of the bank to protect it from storming wave. This work typically done by a diver is difficult and dangerous so that we have developed Stone Diver which is the underwater robot for harbour construction. The robot needs a position sensor to control the hydraulic cylinder. The position sensors mounted outside the cylinders cause poor durability in construction site where shock and dust usually occur. However, the pressure sensor mounted inside a waterproof box improves the durability. Based on the dynamic parameters and the pressures in the cylinder, the observer measures the cylinder's position. This paper presents the positional accuracy of the pressure based observer and the performance of the underwater robot to assemble the armour stones.

• Journal of Navigation and Port Research
• /
• v.36 no.10
• /
• pp.865-871
• /
• 2012

This paper presents an observer to estimate the displacement of hydraulic cylinders of an underwater robot for harbour construction using a pressure sensor. In harbour constructing, we place heavy armour stones weighing over 2~3 tons on the surface of the bank to protect it from storming wave. This work typically done by a diver is difficult and dangerous so that we have developed Stone Diver which is the underwater robot for harbour construction. The robot needs a displacement sensors to control the position of hydraulic cylinders. The position sensors mounted outside the cylinders cause poor durability in construction site where shock and dust usually occur. However, the pressure sensor mounted inside a waterproof box improves the durability. Based on the dynamic parameters and the pressures in the cylinder, the observer estimates the cylinder's position. This paper presents the positional accuracy of the pressure based observer and the performance of the underwater robot to assemble the armour stones.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.07a
• /
• pp.108-113
• /
• 2002

우리 식생활에서 중요한 위치를 차지하고 있는 배추는 최근 식생활패턴 변화에 따라 외식 소비와 여성의 사회활동 증가, 가공원료용 수요 및 김치수출 증가 등으로 신선배추수요가 연중 평준화되어 안정적이고 지속적인 공급을 필요로 하고 있다. 그러나 배추재배 기계화는 경운정지, 비닐피복 및 방제작업을 제외하고는 대부분의 작업을 인력에 의존하고 있어 노동생산성 저하 및 생산비 증가의 원인이 되고 있다. 특히, 배추의 생산비 절감 및 안정적인 공급을 위해서는 전체 노동투하시간의 43%를 차지하고 있는 정식, 수확 및 제초작업 등 인력의존도가 높은 작업에 대한 기계화가 시급한 실정이다. (중략)

• Proceedings of the Korean Society of Organic Agriculture Conference
• /
• 2009.12a
• /
• pp.282-282
• /
• 2009

환경오염에 대한 우려 및 안전농산물에 대한 소비자욕구 증대로 유기농산물 시장규모가 최근 3년간 2.8배 성장 추세이다. 친환경농산물 인증면적은 '00년 2,039 ha에서 '07년 122,882 ha로 급격히 증가하고 있으나 생태적 원리에 부합된 벼 재배기술이 부족하며 특히 무경운 논토양에 대한 경영분석 자료는 거의 없는 실정이다. 본 연구는 유기농업기술을 종합적으로 투입한 시범마을을 육성하기 위하여 하동군 양보면 예성마을 1ha를 대상으로 관행농업과 무경운 자운영 피복 벼 기계이앙을 실증하여 경제적인 효과를 검토하였다. 토양 관리를 위해 2007년 9월 10일에 자운영을 3 kg/10a 파종하여 겨울철 토양 생태계를 유지하였고 화학비료나 농약을 사용하지 않았다. 볍씨 소독은 마른 종자를 60 $^{\circ}C$에서 8분간 침지하는 열탕침법을 이용하였으며 논 물담기는 5월 28일경 15 cm 이상 깊게 하여 자운영이 잘 분해되도록 하였다. 기계이앙은 6월 10일경 표면 1 cm 이내의 물 깊이에서 식부장치를 최대한 깊게하고 주수는 주당 5-7주 정도로 실시하였으며 기계이앙 후에는 5일 정도 물을 담지 않고 그대로 두고 그 후 물을 10 cm 이상 깊게 하여 잡초발생을 억제하였다. 중간낙수는 7월 10일경 1회 처리하였고 수확기 낙수는 9월 23일 실시하였다. 무경운 처리구의 이앙전 토양 가밀도는 관행 1.30 g $cm^{-3}$ 비해 0.09 g $cm^{-3}$ 정도 가벼운 것으로 나타났고 공극률은 관행 50.8%에 비해 3.5% 높은 것으로 나타났으며 특히 수분률이 3.5% 높았다. 무경운 자운영 피복 기계이앙 처리구의 잡초발생 건물량은 7월 4일경 피 8.8 g $m^{-2}$, 여뀌 10.8 g $m^{-2}$ 이었으며 9월 18일에는 피 16.0 g $m^{-2}$, 여뀌 12.3 g $m^{-2}$였다. 수확기 관행처리구의 주당 이삭수는 16.7개, 수당립수는 101개, 천립중은 25.4 g, 등숙비율은 82.3%로 수량은 517 kg $10a^{-1}$ 였으며 무경운 자운영 피복 기계이앙은 주당 이삭수가 14.1개, 수당 립수는 103개, 천립중은 26.2 g, 등숙비율은 91.2%로 수량이 456 kg $10a^{-1}$였다. 무경운 자운영피복 벼 기계이앙은 기경작업이나 시비작업 등이 없으므로 노동력이 60% 절감되었으며 농가소득은 5% 증대되었다. 따라서 농업분야 저탄소 녹색성장과 관련하여 자연 생태계를 보전하면서 농가소득을 유지할 수 있는 방법으로 무경운 자운영 피복 벼 기계이앙이 효과적인 것으로 판단되었다.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1997.05a
• /
• pp.74-75
• /
• 1997

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.10 no.4
• /
• pp.273-280
• /
• 2012

The electrochemical behaviors of 10 g-scale fresh and oxidized Zircaloy-4 cladding hulls were examined in $500^{\circ}C$ LiCl-KCl molten salts to confirm the feasibility of the electrorefining process for the treatment of hull wastes. In the results of measuring the potential-current response using a stainless steel basket filled with oxidized Zircaloy-4 hull specimens, the oxidation peak of Zr appears to be at -0.7 to -0.8 V vs. Ag/AgCl, which is similar to that of fresh Zircaloy-4 hulls, while the oxidation current is found to be much smaller than that of fresh Zircaloy-4 hulls. These results are congruent with the outcome of current-time curves at -0.78 V and of measuring the change in the average weight and thickness after the electrochemical dissolution process. Although the oxide layer on the surface affects the uniformity and rate of dissolution by decreasing the conductivity of Zircaloy-4 hulls, electrochemical dissolution is considered to occur owing to the defect of the surface and phase properties of the Zr oxide layer.