• Composites Research
• /
• v.14 no.3
• /
• pp.1-9
• /
• 2001

A new non-destructive fatigue prediction model of the composite laminates is developed. The natural frequencies of fatigue-damaged laminates under extensional loading are related to the fatigue life of the laminates by establishing the equivalent flexural stiffness reduction as a function of the elastic properties of sublaminates. The flexural stiffness is derived by relating the 90-ply elastic modulus reduction, and using the laminate plate theory to the degraded elastic modulus and the intact elastic modulus of other laminates. The natural frequency reduction model, in which the dominant fatigue mode can be identified from the sensitivity scale factors of sublaminate elastic properties, provides natural frequency vs. fatigue cycle curves for the composite laminates. Vibration tests were also conducted on $[{90}_2/0_2]_s$ carbon/epoxy laminates to verify the natural frequency reduction model. Correlations between the predictions of the model and experimental results are good.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.84-84
• /
• 1999

최근 큰 잔류분극을 가진 강유전체 Pb(Zr, Ti)O3 박막을 이용한 비휘발성 기억소자의 연구가 활발히 진행되고 있다. 그러나 Pb(Zr, Ti)O3 박막을 비휘발성 기억소자로 응용하는 경우 분극피로(polarization fatigue), imprint, 누설전류 등의 문제점이 나타나는 것으로 알려져 있다. 특히 분극반전 횟수가 증가할수록 잔류분극이 감소하는 분극피로 현상은 비휘발성 기억소자의 응용에 있어서 치명적인 장애가 되므로 기억소자의 실용화를 위해서는 분극피로 현상의 개선이 무엇보다 중요하다. 본 연구에서는 Pb(Zr, Ti)O3 강유전체 박막의 분극피로 현상을 규명하고 개선하기 위해서 다음과 같은 세가 실험적 방법으로 접근하였다. 먼저 Pt와 금속산화물인 LaNiO3을 이용하여 상·하부 전극을 달리하여 제조한 축전기에 대해서 분극피로 특성을 관찰하고 이로부터 분극피로 현상에 대한 전극의 효과를 조사하였다. 여기서 금속산화물인 LaNiO3 박막과 Pt 박막은 r.f. 스퍼트 법으로 증가하였으며 Pb(Zr, Ti)O3 박막은 LaNiO3/Si(100)/와 Pt/Ti/SiO2/i(100) 기판위에 졸겔법으로 제조하였다. 다음으로 분극피로된 박막의 상부전극에 극성이 다른 직류전압을 인가해주었을 때 나타나는 분극회복 현상을 광범위하게 관찰하였으며, 특히 직류전압의 극성에 따라 비대칭적인 분극회복 특성을 보였다. 마지막으로 이와 같은 직류전압에 대한 비대칭적인 분극회복현상에 착안하여 양과 음의 방향으로 바이어스된 스윗칭 펄스를 인가하여 분극피로 특성을 조사한 결과 비대칭적인 분극피로 현상을 관찰할 수 있었다. 이와 같은 Pv(Zr, Ti)O3 박막의 분극피로와 회복의 비대칭적인 현상은 분극피로 현상의 기구를 밝히는 중요한 근거가 되었으며, 본 연구에서는 하부 계면에서의 산소빈자리의 역할로 분극피로 현상을 모형화하였다.식각하기 시작하였으며, 19.5J/cm2에서 유리기판의 rudraus(격벽 두께 130$\mu\textrm{m}$)까지 식각하였다. 대한 정보(RDF)는 명확하게 얻을 수 있었다.nospec과 SEM으로 관찰하였다. 또한 Ge 함량 변화에 따른 morphology 관찰과 변화 관찰을 위하여 AFM, SEM, XRD를 이용하였으며, 이온주입후 열처리 온도에 따른 활성화 정도의 관찰을 위하여 4-point probe와 Hall measurement를 이용하였다. 증착된 다결정 SiGe의 두게를 nanospec과 SEM으로 분석한 결과 Gem이 함량이 적을 때는 높은 온도에서의 증착이 더 빠른 증착속도를 나타내었지만, Ge의 함량이 30% 되었을 때는 온도에 관계없이 일정한 것으로 나타났다. XRD 분석을 한 결과 Peak의 위치가 순수한 Si과 순수한 Ge 사이에 존재하는 것으로 나타났으며, ge 함량이 많아짐에 따라 순수한 Ge쪽으로 옮겨가는 경향을 보였다. SEM, ASFM으로 증착한 다결정 SiGe의 morphology 관찰결과 Ge 함량이 높은 박막의 입계가 다결정 Si의 입계에 비해 훨씬 큰 것으로 나타났으며 근 값도 증가하는 것으로 나타났다. 포유동물 세포에 유전자 발현벡터로써 사용할 수 있음으로 post-genomics시대에 다양한 종류의 단백질 기능연구에 맡은 도움이 되리라 기대한다.다양한 기능을 가진 신소재 제조에 있다. 또한 경제적인 측면에서도 고부가 가치의 제품 개발에 따른 새로운 수요 창출과 수익률 향상, 기존의 기능성 안료를 나노(nano)화하여 나노 입자를 제조, 기존의 기능성 안료에 대한 비용 절감 효과등을 유도 할 수 있다. 역시 기술적인 측면에서도 특수소재 개발에 있어 최적의 나노 입자 제어기술 개발 및 나노입자를 기능성 소재로 사용하여 새로운 제품의 제조와 고압 기상 분사기술의 최적화에

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.3
• /
• pp.209-223
• /
• 2013

This study was to evaluate the stress distributions of prefabricated, customized abutments and fixtures according to their material and shape by three-dimensional finite element analysis. And to investigate the fatigue life and fracture characteristics. Mandibular models were fabricated by reconstruction of the CT scan of patients with normal occlusion. A total of six finite element models were designed, a load of 100 N was applied on the buccal cusps vertically, and 30 degree obliquely. 10 specimens each were fabricated for the more clinically widely used 4 type abutments and were loaded according to ISO 14801. Differences in stress distribution patterns were not found according to the materials of the abutments and fixtures. But a slight difference in the stress level was detected. Customized abutment groups showed lower crown stress levels. One-piece zirconia implant showed the lowest bone stress levels. In the fatigue test, highest values were measured in group 7. Prefabricated abutments showed less variation of fatigue life (P<0.05). Use of customized abutments can improve the fracture resistance of restorations. Especially, use of customized zirconia abutments reinforced by titanium screw connecting parts is recommended.

• 한국도로학회:학술대회논문집
• /
• 2010.09a
• /
• pp.179-184
• /
• 2010

• Proceedings of the KSR Conference
• /
• 2006.05b
• /
• pp.522-527
• /
• 2006

• Journal of Korean Society of Steel Construction
• /
• v.9 no.3 s.32
• /
• pp.363-375
• /
• 1997

This study encompasses the performance of static and fatigue test for the 8 large scale test specimens to clarify the fatigue behavior of coped stringer and the effect of the repair and strengthening on the damaged stringer of the floor system in steel railway bridges. For the purpose of the research, the actual stress wave for the existing bridge was measured, the basic stress range frequency histogram was made and the equivalent stress range was calculated. Using the result from the equivalent stress range made by adjusting the stress range, the static and fatigue test was carried out by identifying the previous rehabilitation and after. As the result of the static tests, it was revealed that the level of local stress under the S1 specimen test of the real equivalent stress range was similar to tensile strength of the test material, and it was consistent with the requirement of the initiation condition of the fatigue crack. Through the various rehabilitation methods to the damaged specimens, the effects of the repair and reinforcement were analyzed. According to the results of the repair of effect, bolting the high tension bolt over the stop hole was confirmed to be more adequate method than drilling only stop hole to delay the fatigue crack growth. Futhermore, in case of the stringer subjected by bending moment, the reinforcement over the upper flange side was determined to be a useful strengthening method, and the reinforcement to the web of the stringer was not appropriate to accomodate as a adequate strengthening method. Also it was confirmed that the category of the fatigue design for the coped stringer met with the category E specified on the fatigue design criteria of the Highway Standard Specification in Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.6
• /
• pp.2169-2177
• /
• 2010

The effects of job related factors on psychosocial health status were examined by taking job stress into account. The self-administered questionnaires were performed, during the period between Oct. 1st, 2009 and Nov. 30th, 2009, to 805 individuals in the service of general administration located in Daejeon City. Causal relationships between job related factors, job stress, and, psychosocial health status were examined by structural equation model. The main finding as follows: For correlations of such indices of psychosocial health status as PWI and MFS with various studied items, all of these two indices were found to be in a negative correlation with the job position, job career, satisfaction in job life, autonomy of job, supervisors support and coworkers support, whereas in positive correlation with the experience of sick absence per year and job demand. With the analysis of structural equation model, the degree of job stress factors was more influential on the level of psychosocial health status than job related factors in such a manner as that the greater the job stress, while the lower the job related factors, the higher the psychosocial health status(PWI and MFS). Moreover, it was found to have the inter-relational effects that the greater the job related factors, the lower the job stress factors. Thus the effective strategy for stress and fatigue symptoms reduction among governmental employees requires additional programs focusing on innovated job specifications.

• Journal of Korean Academy of Nursing
• /
• v.34 no.2
• /
• pp.333-343
• /
• 2004

Purpose: This study was designed to construct a structural model for symptom management of life of the patients with chronic fatigue. The hypothetical model was developed based on the literature review and Self-regulating Model. Method: Data were collected by questionnaires from 252 patients with chronic fatigue in the 8 community from December 2002 to April 2003 in Seoul. Data analysis was done with SAS for descriptive statistics and PC-LISREL Program for Covariance structural analysis. Result: The fit of the hypothetical model to the data was moderate, thus it was modified by excluding 4 path and including free parameters and 3 path to it The modified model with path showed a good fitness to the empirical data($x^2$=318.11, p=0.0, GFI=.98, AGFI=.98, NNFI=.95, RMSR=.03, RMSEA=.05). The symptoms of stress, self-efficacy, and present fatigue level were found to have significant direct effect on symptom management of the patients with chronic fatigue. The ways of coping, perceived stress, and fatigue symptom were found to have indirect effects on symptom management of the patients with chronic fatigue. Conclusion: The derived model is considered appropriate in explaining and predicting symptom management of the patients with chronic fatigue. Therefore, it can effectively be used as a reference model for further studies and suggested direction in nursing practice.

• Journal of Broadcast Engineering
• /
• v.19 no.2
• /
• pp.215-226
• /
• 2014

The 3D technology has been spread slowly and the reason would be attributed to the fact that most commercialized 3D displays require 3D glasses. There have been various researches on human factors of glass type 3D display. In this study we measured and modeled crosstalk as well as 3D visual fatigue induced by mobile glassless 3D display. Crosstalk as well as visual fatigue varied depending on horizontal position of the 3D mobile display. Measured crosstalk was relative low around the center of the display and it increased at the side of the display. Similar results were found in the measurement of 3D visual fatigue and discomfort. These results imply that human factors should be considered in the process of design and evaluation of mobile 3D displays.

• Journal of Digital Convergence
• /
• v.17 no.12
• /
• pp.329-336
• /
• 2019

This study is a descriptive research study that examines the level of terminal care nursing care and the effects on terminal nursing in the internal and external control beliefs of nurses in the nursing geriaic hospital.. The subjects consisted of 442 nurses, and data were collected through structured questionnaires.. The data were analyzed with descriptive that used SPSS WIN 22.0, and AMOS 5.0 statistical program was hypothetical model and path analysis of research hypothesis. As a result, terminal care of geriatric hospital nurses was statininificant to the terminal care stress, fatigue and locus of internal & external control. and the higher the internal control belief, the less stress of the terminal care and the higher the terminal care performance As a result, this study providers a more terminal care performance, It is considered that nursing hospital nurses who develop strategic programs and terminal care nursing will need to provide quality nursing education and work environment improvement.