• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.143-144
• /
• 2003

최근 들어 플라즈마 촉매 복합공정을 이용하여 NOx를 제거시키기 위한 연구가 활발히 이루어지고 있다. 저온 플라즈마 공정중 하나인 DBD (Dielectric barrier discharge) 공정 내에서 NO는 NO$_2$로 매우 효과적으로 전환된다. 촉매공정의 경우 NO보다 NO$_2$가 주입되는 경우 NOx 제거 효율이 높고 촉매의 피독 현상도 줄어들게 된다. 따라서 DBD를 이용하여 NO의 전환율을 높일 수 있다면 플라즈마 촉매 복합공정의 NOx 제거 효율은 매우 높아진다. DBD 반응기 내에서 NO를 NO2로 전환시키는데 가장 중요한 역할을 하는 것 중 하나는 오존 (O$_3$)이다. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2001.11a
• /
• pp.143-144
• /
• 2001

질소산화물(NOx) 제거기술 중, 선택적촉매환원(Selective Catalytic Reduciton: SCR)공정은 배기가스 중에 포함되어 있는 질소산화물을 암모니아와 촉매상에서 반응시켜 무해한 질소와 물로 전환하는 기술로 높은 탈질율 및 안정적인 기술로 인하여 상업적으로 널리 이용되고 있다(Bosch, 1988). 귀금속촉매, Cu/Zeolite 촉매 및 V$_2$O$_{5}$/TiO$_2$ 등 다양한 촉매들이 SCR 공정에 적용되는데 V$_2$O$_{5}$/TiO$_2$ 촉매가 높은 활성과 황 등 피독 물질에 대한 우수한 내구성으로 인하여 가장 효과적인 촉매로 알려져있다(Heck, 1999). (중략)

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.902-905
• /
• 2009

축사 또는 쓰레기장에서 에서 발생되는 있는 물질인 암모니아, 아민, 메탄, 탄화수소류 등에 대한 처리를 위한 촉매 개발을 수행하였다. 암모니아를 금속산화물형태의 촉매를 사용하여 산화하였을 경우 $N_2$, NO, $NO_2$, $N_2O$가 일정 비율로 생성되게 된다. 이때의 NO, $NO_2$는 악취는 발생하지 않으나 유독성 가스이므로 이에 대한 선택성이 낮은 촉매를 선별하고 온도에 따른 활성능을 시험하여 최적의 촉매조성을 도출하였다. 다양한 산화가를 지닌 망간을 대상으로 각종 조촉매의 혼합에 따른 실험을 수행하여 최적 조성을 도출 하였다. 촉매 선별작업에서는 충전층을 사용하고, 선별된 촉매에 대하여 모노리스에 코팅하여 사용할 수 있는 모노리스형태의 반응기를 장착하여 모노리스 형태 촉매의 반응성 및 피독특성을 실험하였다.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.2
• /
• pp.199-208
• /
• 2000

In this study we investigated on the possibility of platinum and silver catalysts as de-NOx catalyst for activity test of supported metal oxide catalysts. the study was performed with the change of amount of metal and support types. The catalyst was prepared the activity of alumina supported silver catalyst produced by dry and wet impregnation method respectively and the resistance of sulfur for optimum supported silver catalyst,. As a result the activity of alumina supported platinum catalyst was showed at low temperature region but the case of silver catalyst activated at high temperature region. So we finally chose alumina supported silver catalyst as de-NOx target catalyst because alumina supported catalyst showed higher activity than alumina supported platinum catalyst.

• Applied Chemistry for Engineering
• /
• v.10 no.5
• /
• pp.754-760
• /
• 1999

The properties of the catalyst for a direct internal reforming type molten carbonate fuel cell were examined by ICP, BET, CHN, EDS, and $H_2$ chemisorption. Potassium and lithium, the components of carbonate electrolyte, were transported to the catalyst during the operation of fuel cell, and the amounts of the deposited alkali elements were reduced in the order of inlet, outlet, and the middle. From the direct correlation between the amount of alkali and the physical properties such as BET surface area and Ni dispersion, and from the observation of the lump of the alkali species on the poisoned catalyst, it was confirmed that the physical blocking of the catalyst by alkali deposition was the main reason for the deactivation. Although the amount of alkali species was greater at the inlet than at the oulet, the catalyst sampled from the outlet had lower activity. This was caused by the chemical interaction between the alkali species and the catalyst at the outlet where temperature was highest in the cell body, which was detected by FT-IR analyses.

• Applied Chemistry for Engineering
• /
• v.8 no.4
• /
• pp.568-574
• /
• 1997

The effect of microencapsulation of maetal hydride (MH) with copper on the electrode performance of a Ni/MH battery has been investigated. The MH electrodes were prepared with a combination of cold press and paste methods. The discharge capacity of the electrode increased with an addition of small amounts if CMC into the electrode, but decreased when heat-treated in an oxygen-free nitrogen flow. The capacity of a Cu-coated $LaNi_5$ electrode was higher than that of LaNi5electrode. The discharge capacity of the electrode prepared with Cu-coated $LaNi_5$ increased with the increase of copper content in the electrode. It is considered that the increase of copper content enhanced the current density on the electrode surface, leading to the increase of the discharge capacity The MH electrode coated by an acidic electroless plating method showed much higher discharge capacity than that using an alkaline electroless plating method. The discharge capacity of the $LaNi_{4.5}Al_{0.5}$ electrode was higher than that of the $LaNi_5$ electrode. Also, the effect of microencapsulation on the deactivation of $LaNi_5$ was studied using an absorption-desorption cycle in CO-containing hydrogen.

• Applied Chemistry for Engineering
• /
• v.18 no.4
• /
• pp.337-343
• /
• 2007

The reforming catalyst and the electrodes in fuel cells can be poisoned by the organic sulfur compound which is added as an odorant for checking out the leakage of natural gas, and that makes a big problem of system degradation. In this study, various adsorbents, such as silica, ${\gamma}$-alumina, activated carbon, HZSM-5, Ultra-stable Y zeolite (USY), and beta zeolite (BEA), were utilized to remove tetra-hydrothiophene (THT) and tert-butylmercaptan (TBM), and to confirm the performance in the adsorption of those odorants by using a continuous adsorptive bed. The effects of Si/Al ratio of zeolites, adsorption temperature and the type of balance gas (methane or He) on the adsorption performance in the packed bed have been investigated. In addition, the competitive adsorption between TBM and THT on the adsorbents was also estimated. The result shows that H-type BEA zeolite exhibited the highest adsorption capacity for TBM and THT odorant, and the higher amount of THT was removed adsorptively on the same adsorbent than TBM. The physical and chemical adsorption of those compounds on acid sites of zeolite were confirmed by temperature programmed desorption (TPD) and infrared spectrum (IR) analyses.

• Journal of the Korean Electrochemical Society
• /
• v.24 no.4
• /
• pp.106-112
• /
• 2021

Catalyst poisoning by ionomers in membrane electrode assemblies of alkaline membrane fuel cells has been reported recently. We tried to improve the membrane electrode assembly's performance by controlling the solvent's ratio during electrode manufacturing. 4 Different mixing ratios of N-Methyl-2-pyrrolidone (NMP) and ethylene glycol (EG) gave four different cathode electrodes with platinum and Fuma-Tech ionomers. The electrode with higher EG improved polarization performance by about 36% compared to the NMP-based commercial ionomer. The dependence of the ionomer's dispersibility on the solvent seems responsible for the difference, which means that the non-uniform distribution of ionomers improves the performance of the electrode. High-frequency resistance, internal resistance corrected polarization curve, Tafel slope, mass activity, and impedance spectroscopy characterized the electrode. We can find that the existence of poor solvent improves cathode electrode performance. It seems to be the result of reduced poisoning of the catalyst according to the particle size distribution of the ionomer.

• Journal of the Korean Chemical Society
• /
• v.23 no.2
• /
• pp.80-87
• /
• 1979

The active site for the formation of acrolein in propylene oxidation reaction over copper(Ⅱ)-exchanged zeolite Y has been studied. At the early stage of the reaction, the formation of hydrocarbons was observed. The formation of hydrocarbons decreased gradually during the course of reaction, apparently due to the poisoning the Bronsted acid sites. The formation of acrolein was quite low when the formation of hydrocarbons was proceeding. The formation of acrolein was depend on the copper ion content and this can be related to the availability of the copper ions inside the supercage. It seems that it is the copper ion not the Bronsted acid site which is primarily responsible for the formation of acrolein.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.107.2-107.2
• /
• 2010

고온건식탈황기술은 고온고압에서 석탄가스에 함유된 황화합물을 제거하는 기술로 석탄가스화에 의해 생성된 고온의 석탄가스의 열손실을 최소화하여 열효율이 높은 기술이다. 본 연구에서는 석탄으로부터 합성원유를 생산하는 0.3 배럴/일 규모 석탄액화(CTL)공정의 연계운전을 통하여 건식탈황공정의 성능을 평가하였다. 0.3 배럴/일 규모 석탄액화공정은 석탄가스화기, 건식탈황공정, 액화공정으로 구성되어 있으며 30 atm의 고압에서 운전된다. 건식탈황공정은 석탄가스화기와 액화공정 사이에 위치하여 석탄가스화로부터 생성된 석탄가스에 함유된 황화합물을 아연계 건식탈황제에 의해 제거한 후 액화반응기로 공급하여 황화합물에 의한 촉매의 피독을 막아주는 역할을 수행한다. 본 연구에서는 기존에 개발된 두 개의 기포유동층 반응기로 구성된 탈황장치를 30 atm에서 운전이 가능하도록 수정/보완하여 실제 운전압력인 30 atm의 고압에서 연속운전을 수행하였다. 실험 결과 탈황효율은 99% 이상이며 탈황반응기 출구 황화합물의 농도는 1 ppmv 이하로 유지하였다.