• Journal of Digital Convergence
• /
• v.11 no.1
• /
• pp.129-138
• /
• 2013

As the use of smartphones becomes widespread, the negative aspects of smartphone are under controversy. The cutting-edge technologies, such as smartphone, lead to technostress, and the digital addiction causes a social problem, where users cannot properly work without smartphone in their hands, causing anxiety or embarrassment to them. The digital detox intended to solve such digital addiction and the technostress caused by cutting-edge technologies are currently under controversy. This paper investigated the negative factors from smartphone as internal factors affecting the use of smartphone and found their relationship. In this study, a theoretical study model was presented on the satisfaction of smartphone users, in which technostress was selected as an independent variable affecting the satisfaction of smartphone users and user satisfaction as an dependent variable, and digital detox, perceived usefulness and flow were set as parameters. This paper, investigated the effects of technostress and digital detox on the satisfaction of smartphone users with questionnaires data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5B
• /
• pp.455-462
• /
• 2009

In this paper, we propose a buffer management scheme for decreasing the packet loss due to buffer overflow and improving the packet fairness between nodes in IEEE 802.11 based multi-hop mesh networks. In the proposed scheme, each mesh router that is an intermediate node receives fairly packet sent from neighboring mesh routers and mobile nodes, and it improves the reception ratio of multi-hop traffic of neighboring mesh routers. Therefore, the proposed scheme can reduce transmission delay and energy consumption. In order to improving the packet loss and the packet fairness, the proposed scheme uses the modified RTS/CTS under the IEEE 802.11 MAC protocol and reduces the packet loss by recognizing the packet size to send to the destination in advance. By using the simulation, we evaluated the proposed scheme in terms of the packet loss ratio and the number of received packet in each mesh router, and compare it to a traditional scheme.

• The KIPS Transactions:PartD
• /
• v.16D no.4
• /
• pp.595-612
• /
• 2009

The early test can greatly reduce the cost of error correction for system development. It is still important in SOA based service system. However, the existing methods of test case generation for SOA have limitations which are restricted to only web service using XML. Therefore, this paper proposes a method of test case generation using BPMN-based model reduction for service system. For minimizing test effort, an existing BPM is transformed into S-BPM which is composed of basic elements of workflow. The process of test case generation starts with making S-BPM concerning the target service system, and transforms the target service system into directed graph. And then, we generate several service scenarios applying scenario searching algorithm and extract message moving information. Applying this method, we can obtain effective test cases which are even unlimited to web service. This result is the generation of test case which is reflected in the business-driven property of SOA.

• The Journal of Society for e-Business Studies
• /
• v.18 no.2
• /
• pp.223-240
• /
• 2013

RFID(Radio Frequency Identification) is use of an RFID tag applied to object for the purpose of identification and tracking using radio waves. Recently, it is being actively researched and introduced in logistics and manufacturing. RFID portals in supply chains are meant to identify all the tags within a given interrogation zone. Hence the hardware and software mechanisms for RFID tag identification mostly focus on successful read of multiple tags simultaneously. Such mechanisms, however, are inefficient for determining moving direction of tags, sequence of consecutive tags, and validity of the tag reads from the viewpoint of workflow. These types of problems usually cause many difficulties in RFID portal implementation in manufacturing environment, there by having RFID-system developers waste a considerable amount of time. In this research, we designated an RFID portal system with SDO(Sequence, Direction, and Object-flow)-perception capability by using fundamental data supplied by ordinary RFID readers. Using our work, RFID system developers can save a great amount of time building RFID data-capturing applications in manufacturing environment.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06a
• /
• pp.109-111
• /
• 2006

본 논문은 애니메이터로 하여금 얼굴 표정들의 공간으로부터 일련의 표정을 선택하게 함으로써 3차원 아바타의 표정을 실시간적으로 제어할 수 있도록 하기 위한 표정공간의 생성방법에 관하여 기술한다. 본 시스템에서는 약 2400여개의 얼굴 표정 프레임을 이용하여 표정공간을 구성하였다. 본 기법에서는 한 표정을 표시하는 상태표현으로 얼굴특징 점들 간의 상호거리를 표시하는 거리행렬을 사용한다. 이 거리행렬의 집합을 표정공간으로 한다. 그러나 이 표정공간은 한 표정이 다른 표정까지 이동할 때 두 표정간의 직선경로를 통해 이동할 수 있는 그런 공간이 아니다. 본 기법에서는 한 표정에서 다른 표정까지 거쳐 갈 수 있는 경로를 캡쳐된 표정 데이터로부터 근사적으로 유추한다. 우선, 각 표정상태를 표현하는 거리행렬간의 거리가 일정 값 이하인 경우 두 표정을 인접해 있다고 간주한다. 임의의 두 표정 상태가 일련의 인접표정들의 집합으로 연결되어 있으면 두 표정간에 경로가 존재한다고 간주한다. 한 표정에서 다른 표정으로 변화할 때 두 표정간의 최단경로를 통해 이동한다고 가정한다. 두 표정간의 최단거리를 구하기 위해 다이내믹 프로그래밍 기법을 이용한다. 이 거리행렬의 집합인 표정공간은 다차원 공간이다. 3차원 아바타의 얼굴 표정 제어는 애니메이터들이 표정공간을 항해할 때 실시간적으로 수행된다. 이를 도와주기 위해 표정공간을 차원 스케일링 기법을 이용하여 2차원 공간으로 가시화하였고, 애니메이터들로 하여금 본 시스템을 사용하여 실시간 표정 제어를 수행하게 했는데, 본 논문은 그 결과를 평가한다.참여하는 빈들 간의 관계를 분석하여 워크플로우에 대한 성능 측정이 가능하도록 한다. 또한 제안된 메트릭을 통하여 EJB 어플리케이션의 성능 향상을 도모할 수 있도록 한다.로 표면 위로 자라났고, 부종은 창상 밑 조직까지 감소하였으며, 육아조직은 교원질 섬유로 대체되었다. 창상 유발 21일 후, 다른 창상에 비해, HG 처치창은 유의적으로 창상 표면이 거의 재생성 상피로 덮였으며, 육아조직은 창상 유발 14일 후와 비교해서 유의적으로 교원질 섬유로 대체되었다. 위의 모든 결과에서 보듯이, 개에서 전층피부 창상의 처치 시 HG의 사용은 HC와 생리 식염수에 비해 창상치유 복구기의 치유 속도를 촉진하는 것으로 사료된다.시범학교의 자녀를 들 부모들은 환경관련문제에 대한 의식 및 환경관련 제품에 대한 구매행동의 변화가 두드러지게 나타났다.EX>$d^{2+}$ + SA처리구는 두 화합물의 이중 효과에 의해 전반적인 생리 활성을 억제하여, 결국에는 식물의 고사를 유도하는 것으로 사료된다.목에 대한 보안'이 가장 중요한 것으로 나타났다. 본 연구에서는 솔루션 선정요인에 관한 중요도를 e-마켓플레이스의 유형과 산업 별로 평가해보았는데, 여기에서 밝혀진 중요도를 통해 e 마켓플레이스를 구축하고 자 하는 기업은 솔루션을 자체 개발하거나 구입할 때 올바른 의사결정을 할 수 있다. 그리고 솔루션을 제공하려는 기업측면에서는 e-마켓플레이스를 구축하고자 하는 기업에게 유형과 산업별로 적절한 솔루션을 제공할 수 있다.순환이 뇌대사 및 수술 후 신경학적 결과에 보다 유익한 효과를 제공해 줄 수 있음

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.4
• /
• pp.387-393
• /
• 2013

In shipyard site, a ship is constructed by integrating lots of modules that are made in several sites with different capabilities and specifications. Recently, it needs to make a shipyard to be smart with wired and wireless broadband networks between hierarchical shipyards. In this paper, we propose an installation of LTE femtocell local gateway at a remote shipyard, an information exchange method between hierarchical shipyards, and an offload method to separate the general traffic. We define the mode change in a femtocell gateway for supporting the offload of the general traffic between the headquarter and a remote shipyard, the offload data management and trigger message, and cache entry fields. To show the operation of our proposed off-loading function, we consider the transcipient message flow at the femtocell gateway with its state transition diagram. Hence, it is expected to increase the productivity of shipyard industry with mobile communications and broadband Internet technologies.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.8
• /
• pp.667-673
• /
• 2014

In a smart shipyard area, it is possible to integrate a variety of ship modules from separate sites into a final ship construction by using mobile applications. In this paper, we proposed the LTE femtocell network configuration which is applicable to sub shipyard, the traffic exchange method with shipyard headquarter and offload method to separate the general traffic. We defined the mode change in a femtocell gateway for supporting offload for general traffic between the main server in shipyard headquarter and sub shipyard, the offload data managements and message definition. We check the transmitted/received message flow in the wireless link, and consider the performance of the proposed method using state the transition diagram. It is expected that our results can improve the productivity within a smart shipyard by mobile communications and LTE femtocell network.

• Journal of KIISE:Software and Applications
• /
• v.34 no.5
• /
• pp.407-418
• /
• 2007

Service science is a new application area that implements services in an interdisciplinary area of management, economics, and engineering. Service systems provide functionalities of traditional software systems, moreover the functionalities are more intellectual in that they require dynamic context awareness, analysis, and decision making based on the recognized and analyzed contexts. However, conventional software development approaches do not sufficiently provide methods to model the service requirements and to design service-intensive systems. Therefore, there is a great demand on effective methodologies for developing service systems. In this paper, we compare traditional software systems with service-intensive systems in order to identify characteristics of the service systems. And, we propose a step-wise process to model service systems, in terms of architecture, components, and workflows. Then, we show a case study on an emergency handling system which is a type of living assistant systems. We believe that the proposed approach can be used in developing high-quality service systems effectively.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.280-288
• /
• 2019

In the CR-enabled MANET, routing paths can be easily destroyed due to node mobility and channel unavailability (due to the emergence of the PU of a channel), resulting in significant overhead to maintain/recover the routing path. In this paper, network caching is actively used for route maintenance, taking into account the properties of the CR. In the proposed scheme, even if a node detects that a path becomes unavailable, it does not generate control messages to establish an alternative path. Instead, the node stores the packets in its local cache and 1) waits for a certain amount of time for the PU to disappear; 2) waits for a little longer while overhearing messages from other flow; 3) after that, the node applies local route recovery process or delay tolerant forwarding strategy. According to the simulation study using the OPNET simulator, it is shown that the proposed scheme successfully reduces the amount of control messages for path recovery and the service latency for the time-sensitive traffic by 13.8% and 45.4%, respectively, compared to the existing scheme. Nevertheless, the delivery ratio of the time-insensitive traffic is improved 14.5% in the proposed scheme.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.9
• /
• pp.626-636
• /
• 2009

In Mobile IP-enabled wireless LAN (WLAN), packet flows are corrupted due to the handoff of a mobile node (MN) at the link and network layers, which results in burst packet losses and can cause temporary buffer underflow in a streaming client at the MN. This transient behavior hurts time-sensitive streaming media applications severely. Among many suggestions to address this handoff problem, few studies are concerned with empirical issues regarding the practical validation of handoff options on the time-sensitive streaming media applications. In this paper, targeting seamless streaming over Mobile IP-enabled WLAN, we introduce a seamless media streaming framework that estimates accurate pre-buffering level to compensate the handoff latency. In addition, we propose a link-layer (L2) assisted seamless media streaming system as a preliminary version of this framework. The proposed system is designed to reduce the handoff latency and to overcome the playback disruption from an implementation viewpoint. A packet buffering and forwarding mechanism with L2 trigger is implemented to reduce the handoff latency and to eliminate burst packet losses generated during the handoff. A pre-buffering adjustment is also performed to compensate the handoff latency. The experimental results show that the proposed approach eliminates packet losses during the handoff and thus verify the feasibility of seamless media streaming over Mobile IP-enabled WLAN.