• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.291-292
• /
• 2012

플렉시블 (F-PCB, Flexible Printed Circuit Board)은 얇고 유연하며 모바일, 광학, 노트북, 프린터, LCD 등 IT산업전반에 걸쳐 사용되고 있다. 통신기기가 이동용으로 전환되면서 대용량, 고속의 정보 전달이 필요하다. 인접 회로간의 전자파 차폐, 구리성분의 편석방지와 고성능의 회로소재 확보가 요구된다. 본고에서는 최근의 플렉시블 인쇄회로기판의 주석도금의 위스커방지 품질향상을 중심으로 기술하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.202-202
• /
• 2011

최근 대용량 고속송신을 위한 모바일 무선정보통신기기의 신뢰성향상 함께 광 인쇄회로기판(O-PCB)국산화개발이 진행되고 있다. 광 Rigid-MLB개발에 이어 개발추진중인 광 Flexlble PCB는 광 연결 장치는 대용량데이터를 고속 전송하는데 필수적이다. 전원접속코드를 사용하지 않는 광도파로 층으로 구성되며 전기신호를 광신호로 변환시켜 다층의 광도파로 층으로 전송시킨다. 신속한 전송을 위한 균일도금에칭기술이 요구되고 있다.

• Journal of Welding and Joining
• /
• v.31 no.3
• /
• pp.84-88
• /
• 2013

These days embedded technology may be the most significant development in the electronics industry. The study focused on the development of active device embedding using flexible printed circuit in view of process and materials. The authors fabricated 30um thickness Si chip without any crack, chipping defects with a dicing before grinding process. In order to embed chips into flexible PCB, the chip pads on a chip are connected to bonding pad on flexible PCB using an ACF film. After packaging, all sample were tested by the O/S test and carried out the reliability test. All samples passed environmental reliability test. In the future, this technology will be applied to the wearable electronics and flexible display in the variety of electronics product.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.4
• /
• pp.395-403
• /
• 2012

This is direct bonding many of the metal bumps between FPCB and HPCB substrate. By using an ultrasonic horn mounted on an ultrasonic bonding machine, it is possible to bond gold pads onto the FPCB and HPCB at room temperature without an adhesive like ACA or NCA and high heat and solder. This ultrasonic bonding technology minimizes damage to the material. The process conditions evaluated for obtaining a greater bonding strength than 0.6 kgf, which is commercially required, were 40 kHz of frequency; 0.6MPa of bonding pressure; and 0.5, 1.0, 1.5, and 2.0 s of bonding time. The peel off test was performed for evaluating bonding strength, which was found to be more than 0.80 kgf.