• Journal of the Korean Institute of Gas
• /
• 제15권5호
• /
• pp.50-56
• /
• 2011

A preliminary experimental study of new concept air hybrid engine, which stores compressed air in the tank during braking and re-use it to propel vehicle during crusing or acceleration, was carried out in this study. A single cylinder engine was modified to realize the concept of air hybrid engine. Independent variable valve lift system was adopted in one of the exhaust valves to store the compressed air into the air tank during compression period. An air injector module was installed in the place of spark plug, and the stored compressed air was supplied during the expansion period to realize air motoring mode. For air compression mode, the tank with volume of 30 liter could be charged up to more than 13 bar. By utilizing this stored compressed air, motoring work of 0.41 bar of IMEP(Indicated mean effective pressure) at maximum can be generated at the 800rpm conditions, which is higher than the case of normal idle condition by 1.1 bar of IMEP.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제14권11호
• /
• pp.2442-2450
• /
• 2010

Using sensor devices applied to various objects will be needed wireless network that it is easy to install in them. Tiny devices configured to processor that bas comparatively low computing ability are inappropriate to use devices that are wireless LAN, etc. In result, network devices needed to not only have simple communication protocol, but have Plug and Play function that it works as soon as it connects without installing any device driver. it also will industrially have both low power and low cost because of mobility of it. From IEEE 802.11 standard, WPAN(Wireless Personal Area Network) included in LAN is being developed by WPAN WG(Working Group) on area with low power consumption and low complexity. In addition to, it is standardizing MAC and PRY of the standard that is expected to wirelessly communicate within 10m. WPAN will be used generally in the more near future because of both low power and low cost of Zigbee. In this paper we designed zigbee based user authentication module for a automotive smart-key system.

• Journal of Bio-Environment Control
• /
• 제20권1호
• /
• pp.21-26
• /
• 2011

Differences among cultivars, conditions of nutrient solution, nursing materials, and soilless culture systems were investigated to select suitable cultivar and cultivation methods for stable production of summer spinach in the highlands. The 'Quinto' spinach showed the earliest growth and highest yield. For yield increase of summer spinach, optimal solution pH was 6.0, EC was $2.0dS{\cdot}m^{-1}$, and $NH_4-N$ ratio of nutrient solution was 30 percent Stand rate of spinach in nursing seedlings, at 200-cell-tray filled with mixed nursing soil (peat : perlite = 7 : 3), was higher than those grown in urethane sponge and rock-wool plug. Yield was also 18 to 24 percent higher than those in rock-wool plug and urethane sponge. Plant length and yield of spinach in mixed substrate (peat : perlite = 7 : 3) filled nutrient film technique (MSNFT) system were longer of 18 percent, and higher of 9 percent than those in deep flow technique (DFT) system, respectively. However, changes of root zone temperature, pH and EC showed similar pattern with DFT. Therefore, growing 'Quinto' cultivar at 6.0 of pH, $2.0dS{\cdot}m^{-1}$ of EC, 30 percent of $NH_4-N$ ratio, at 200-cell-tray filled with mixed nursing soil, and MSNFT cultivation system, was the best for production of summer spinach in the highlands.

• Journal of Bio-Environment Control
• /
• 제22권3호
• /
• pp.209-213
• /
• 2013

This study was conducted to produce heads of artichoke in July in Korea. The artichoke was planted in the Autumn and it could be reaped heads of artichokes in late of May in Korea. It can inform us that the artichoke need under some low temperature during the Winter to open flowers. In order to harvest heads of artichoke in the Summer two kinds of cultivar 'Green Globe' and 'Imperial Star' those were grown for 4 weeks in green house of $17^{\circ}C$ which were treated at 3, 6, 9 and $12^{\circ}C$ chamber for 4 weeks and then planted the 8th April. Plant distance was $150{\times}50$ cm. After 3 months most of artichoke of 'Imperial Star (IS)' made heads. Especially, the artichokes 'IS' were treated at $6^{\circ}C$ made heads 63% of plants but those at $12^{\circ}C$ made heads 33% and the artichokes (no treatment at low temperature) grown in greenhouse at $17^{\circ}C$ for 8 weeks made heads 5% of plants. 'Green Globe (GG)' made heads 28% of plants at $9^{\circ}C$ and 10% at $12^{\circ}C$, and 'GG' grown in greenhouse at $17^{\circ}C$ for 8 weeks never had made any head. The weights of head were 97 g and 86 g in 'IS' and 'GG' respectively. The yield of heads were 215 and 108 kg/10a in 'IS' and 'GG' respectively.

• Horticultural Science & Technology
• /
• 제30권6호
• /
• pp.686-693
• /
• 2012

To develop a technique for mass-propagation of virus-free sweet potato [Ipomoea batatas (L.) Lam.] plant using nutrient film technique (NFT), the growth characteristics of 4 cultivars as affected by nutrient solution composition and cutting size were investigated. 72 cells (35 mL/cell) plug trays filled with vermiculite and perlite (1:1, v/v) were used. Vine length, fresh and dry weights of virus-free plants were the greatest in the nutrient solution recommended by National Horticultural Research Station in Japan, followed by that recommended by National Institute of Horticultural & Herbal Science in Korea, and Yamazaki's nutrient solution for lettuce. The growth of uppershoot cuttings was the best among 4 subsections of cutting. Vine length, and fresh and dry weights increased in the longer cutting treatments, and were better in 'Shinzami' and 'Yeonhwangmi' than those in 'Mannami' and 'Shincheonmi'. Vine diameter and length of the longest root were not significantly affected by the cutting size and cutting source. The growth characteristics of the single node cutting were not significantly different from those in 2-node cutting. The efficiency of rapid mass-propagation could be promoted with single node cuttings and uppershoot cuttings grown in NFT system.

• Horticultural Science & Technology
• /
• 제19권3호
• /
• pp.334-337
• /
• 2001

This study was conducted to investigate the effect of highland (Daekwallyung, altitude of 800m above sea level) production of cucumber (Cucumis sativus L.) seedlings for retarding culture in lowland (Kangnung, altitude of 20m above sea level). Cucumbers (cv. Jangilbanbaek, Jeongsunyeoreum and Ginseollok) were raised during 25 days from 31st July to 25th August, and then planted under the rain-shelter at Kangnung 25th August. Mean and minimum temperature during raising seedlings at Daekwallyung, $20.9^{\circ}C$ and $16.1^{\circ}C$ were $3.7^{\circ}C$ and $5.3^{\circ}C$ lower than those of Kangnung, respectively. T/R ratio of the seedlings produced at Daekwallyung was lower than that of Kangnung, but chlorophyll contents were higher. Daekwallyung seedlings were higher female/male ratio compared with seedlings from Kangnung. Marketable yield from cucumber seedlings (cv. Jeongsunyeoreum) produced at Daekwallyung was 32% higher than that of Kangnung. These results showed that cucumber seedling raising place was Daekwallyung for the retarding culture during summer season, particularly, and the best cultivars was Baekchim (cv. Jeongsunyeoreum).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제19권1호
• /
• pp.705-713
• /
• 2018

An automotive ball joint connects the suspension system to the steering system and helps to enable rotational and linear motion between the two elements for steering. This study examines a ball joint used in medium and large-sized pickup trucks. Ball joints consist of a stud, socket, bearing, and plug. The main structural performance metrics of ball joints are the pull-out strength and push-out strength. These structural parameters must meet certain criteria to avoid serious accidents. Test and simulation methods are used to investigate the design requirements, but tests are time-consuming and costly. In this study, we modeled ball joints in SolidWorks and performed a finite element analysis in Abaqus to predict structural performance. The analysis was used to obtain the structural performance required for the static analysis of a 2D axisymmetric model. The uncertainties in the manufacturing of the ball joint were assumed to be the manufacturing tolerances, and the dimensional design variables were identified through case studies. The manufacturing tolerances at each level were defined, and the results were compared with experimental results.

• Journal of Korean Ophthalmic Optics Society
• /
• 제19권3호
• /
• pp.377-382
• /
• 2014

Purpose: To investigate the effect of anterior, posterior corneal astigmatism and total corneal astigmatism on posterior corneal astigmatism by analyzing correlation. Methods: Participants were 31 patients (31 eyes) without corneal disease at the age range of 22 to 28 who had visited hospital to receive corneal refractive surgery. The total corneal astigmatism and anterior and posterior corneal astigmatism were measured using a rotating scheimpflug camera before surgery. The magnitude of astigmatism was calculated with the difference between the meridian of the steep refractive power and the flat, and With-The-Rule and inverse astigmatism were divided according to the direction of the meridian that was the steepest. Results: The averages of total corneal astigmatism and anterior and posterior astigmatism were found to be $1.13{\pm}0.76D$, $1.51{\pm}0.84D$, and $-0.59{\pm}0.17D$. The magnitude of posterior corneal astigmatism was distributed between -1.0 D and -0.25 D in all the subjects, and when the magnitude of total corneal astigmatism was set as 100, the magnitude of anterior corneal astigmatism was $142.9{\pm}29.9%$. Total corneal astigmatism indicated the highest correlation with the magnitude of anterior astigmatism (y = 0.871x-0.184, $R^2=0.982$) and high negative correlation with posterior astigmatism (y = -2.974x-0.184, $R^2=0.698$). All the subjects' anterior and posterior corneal astigmatism was classified into With-The-Rule. Conclusions: Anterior and posterior corneal astigmatism in the subjects in their 20's showed the magnitude of -3.8 D in 0.2 D and -0.25 D in -1.0 D separately, and both anterior and posterior astigmatism indicated a high percentage of With-The-Rule.

• Communications for Statistical Applications and Methods
• /
• 제16권3호
• /
• pp.449-461
• /
• 2009

Higher sigma quality level is generally perceived by customers as improved performance by assigning a correspondingly higher satisfaction score. The process capability indices and the sigma level $Z_{st}$ ave been widely used in six sigma industries to assess process performance. Most evaluations on process capability indices focus on statistical estimation under normal process which may result in unreliable assessments of process performance. In this paper, we consider statistical estimation for bivariate VPCI(Vector-valued Process Capability Index) $C_{pkl}=(C_{pklx},\;C_{pklx})$ under Marshall and Olkin (1967)'s bivariate exponential process. First, we derive some limiting distribution for statistical inference of bivariate VPCI $C_{pkl}$. And we propose two asymptotic normal confidence regions for bivariate VPCI $C_{pkl}$. The proposed method may be very useful under bivariate exponential process. A numerical result based on our proposed method shows to be more reliable.

• Korean Journal of Plant Resources
• /
• 제33권1호
• /
• pp.24-32
• /
• 2020

This study was aimed to establish the most effective approach for the cultivation of Veronica rotunda var. subintegra (Nakai) T.Yamaz. plants, which was expected as new ornamental plants. We conducted an experiment using plug seedlings, varied the seeding container type and seeding rate. We also varied seedling quality, planting container, soil type, and shading ratio. Seedling quality was used seedlings produced from different seeding containers and seeding rates. The seedling quality were seeding growth using 162, 200, and 288 trays, and seedings rate was used seedlings produced by sowing 1, 2, 4 and 6 seeds. As a result, 162 trays of seedlings were suitable for use in this study. Plants grown with one seed per cell in individual cells exhibited increased individual growth, but those grown with four seeds per cell exhibited better growth for the whole plant. According to seedling quality, seedlings produced in the 162 trays or with four seeds per cell showed higher growth than other seedlings. In the cultivation of V. rotunda var. subintegra (Nakai) T.Yamaz., seedling growth increased depending on container capacity for both shoot and root parts. Container material had no significant impact on seedling growth. Seedlings grew the best on horticultural substrate, and showed better growth on mixed soils with high decomposed granite content than on peatmoss.