• Journal of the Korea Concrete Institute
• /
• v.17 no.3 s.87
• /
• pp.335-342
• /
• 2005

In this paper, fundamental properties of Polymer Concrete(PC), made from unsaturated polyester resin based on recycled PET and recycled aggregate were investigated. Mechanical properties include strength, modulus of elasticity, and chemical resistance. Resins based on recycled PET and recycled aggregate offer the possibility of low source cost for forming useful products, and would also help alleviate an environmental problem and save energy. The results of test for resin contents and recycled aggregate ratio we, first, the strength of Polymer Concrete made with resin based on recycled PET and recycled aggregate increases with resin contents relatively, however beyond a certain resin contents the strength does not change appreciably, Second, the relationship between the compressive strength and recycled aggregate ratio at resin $9\%$ has a close correlation linearly whereas there is no correlation between the compressive strength and the flexural strength of RPC with recycled aggregate ratio. Third, the effect of acid resistance at resin $9\%$ was found to be nearly unaffected by HCI, whereas the PC with $100\%$ recycled aggregate showed poor acid resistance. Unlike acid, alkali nearly does not seem to attack the RPC as is evident from the weight change and compressive strength. And last, In case of stress-strain curve of polymer concrete with $100\%$ of natural aggregate and $100\%$ recycled aggregate it is observed the exceptional behavior resulting in different failure mechanisms of the material under compression.

• Journal of the Korea Concrete Institute
• /
• v.19 no.2
• /
• pp.233-239
• /
• 2007

The main objective of this study was to evaluate the effect of recycled PET fiber made from waste PET bottle on the control of plastic shrinkage cracking of cement based composites. PET is blown as a plastic material and used in a variety products such as a beverage bottle. However, waste PET bottles are thrown after the usage, raising huge problems in terms of the environment. Thus, the research on the method to recycle the PET bottles indicates important aspects in environment and economy. The method to recycle waste PET bottles as a reinforcing fiber for cement based composites is one of effective methods in terms of the recycle of waste PET bottles. In this research, the effect of recycled PET fiber geometry and length on the control of plastic shrinkage was examined through thin slab tests. A test program was carried out to understand the influence of fiber geometry, length and fiber volume fraction. Three type of recycled PET fibers including straight, twist crimped and embossed type. Three volume fraction and two fiber length were investigated for each of the three fiber geometry. Test results indicated that recycled PET fibers are effective in controlling plastic shrinkage cracking in cement based composites. In respect to effect of length of fiber, longer fiber was observed to have efficient cracking controlling with low volume fraction in same fiber geometry while shorter fiber controled plastic shrinkage cracking efficiently as addition rate increase. Also, embossed type fibers were more effective in controlling plastic shrinkage cracking than other geometry fiber at low volume fraction. But, for high volume fraction, straight type fibers were most effective in plastic shrinkage cracking controlling in cement based composites.

• Korean Journal of Ichthyology
• /
• v.12 no.3
• /
• pp.180-185
• /
• 2000

The effects of bisphenol-A(BPA), a monomer of plastics used in many consumer products, on vitellogenin(VTG) synthesis were examined in primary hepatocyte culture of olive flounder, Paralichthys olivaceus. The hepatocytes were precultured for 2 days, and then estradiol-$17\beta(10^{-6}M)$ and BPA were simultaneously added to the incubation medium. The hepatocytes were cultured for 6 more days and then spent medium was analyzed by SDS-PAGE. BPA increased the rate of VTG to total protein concentrations in a concentration-dependent way, and a significant difference was obtained at concentrations of $10^{-6}M$ and $10^{-5}M$ (P<0.05). In particular, the rate of VTG to total protein concentrations was 26.36% at $10^{-5}M$ of BPA, and its level did not differ from the control level with $E_2$ alone. $E_2$ and/or BPA-primed VTG synthesis was markedly inhibited to about 80% of the control(with $E_2$) by the addition of tamoxifen($10^{-6}M$) to the incubation medium. Furthermore, In vivo $E_2$-primed VTG synthesis was significantly inhibited by in vitro $E_2$-free incubation of hepatocyte to about 22% of the control (with $E_2$) on Day 6. The effect of reducing was delayed in a BPA concentration-dependent way. These results suggest that BPA induce VTG synthesis by estrogenic activity through estrogen receptor mediated response and prolong VTG synthesis on vitellogenesis in olive flounder.

• Progress in Medical Physics
• /
• v.8 no.2
• /
• pp.45-57
• /
• 1997

It is mandatory to measure accurately the dose distribution and the total absorbed dose of fast neutron for putting it to the clinical use. At present the methods of measurement of fast neutron are proposed largely by American Associations of Physicists in Medicine, European Clinical Neutron Dosimetry Group, and International Commission on Radiation Units and Measurements. The complexity of measurement, however, induces the methodological differences between them. In our study, therefore, we tried to establish a unique technique of measurement by means of measuring the emitted doses and the dose distribution of fast neutron beam from neutron therapy machine, and to invent a standard method of measurement adequate to our situation. For measuring the absorbed doses and the dose distribution of fast neutron beam, we used IC-17 and IC-18 ion chambers manufactured by A-150 plastic(tissue-equivalent material), IC-17M ion chamber manufactured by magnesium, TE gas and Ar gas, and RDM 2A electrometer. The magnitude of gamma-contamination intermingled with fast neutron beam was about 13％ at 5cm depth of standard irradiated field, and increased as the depth was increased. At the central axis the maximum dose depth and 50％ dose depth were 1.32cm and 14.8cm, respectively. The surface dose rate was 41.6-54.1％ throughout the entire irradiated fields and increased as the irradiated fields were increased. Beam profile was that the horn effect of about 7.5％ appeared at 2.5cm depth and the flattest at 10cm depth.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.23 no.3
• /
• pp.163-171
• /
• 2017

Effects of different packaging methods for maintaining the shelf life and postharvest quality of iceberg lettuce (Lactuca sativa L.) were studied after harvesting in summer season. Lettuce heads were packaged in plastic crate with or without different films such as (A) Individual lettuce head sealed packaging with linear low density polyethylene (LLDPE) film; (B) Packaging lettuce head in plastic crate and wrapped with LLDPE film; (C): Individual lettuce head sealed packaging with perforated high density polyethylene (HDPE) film; (D) Packaging lettuce head in plastic crate and wrapped with perforated HDPE; and (E) Packaging lettuce head in plastic crate without any film (control), and stored at $2^{\circ}C$ for 35 days. Several quality parameters such as fresh weight loss, SPAD (soil & plant analyzer development) meter value, respiration rate, moisture content and appearance of lettuce were investigated. The lettuce wrapped with individually-sealed LLDPE film showed the lowest weight loss and the highest SPAD value rendering the best appearance index among the treataments throughout the three-week storage period at $2^{\circ}C$. Extending the freshness of iceberg lettuce during low temperature storage will definitely increase the salability potential in the domestic market even during summer season.

• Korean Journal of Organic Agriculture
• /
• v.8 no.3
• /
• pp.99-109
• /
• 2000

This experiment was conducted to investigate the changes of rate of infected common scab and yield characteristics of fall potato(Solanum tuberosum L.) where green manual crops had been previously cultivated, crushed and tilled and P\ulcornerE transparent vinyl film had been mulched and tunneled to solar heating of soil from May 21. 1998 to July 28. 1998. The total yields of green manual crops which had been previousely cultivated were as followed order : pioneer 855F(64.3MT/ha), soybean(25.0MT/ha), red clover and orchardgrass. The average below-ground temperature at the depths of 5, 10 and 20cm were 54, 45 and 44$^{\circ}C$ during the mulching period, respectively The rate of infected area per potato tuber of common scab decreased by solar heating the soils with mulching after the soybean and red clover cultivation as with previous croppings. Plant height, SPAD(soil plant analysis development) reading, fresh weight of stems, and fall potato's tuber yields tended to increase by the cultivation of green manual crops and mulching of P\ulcornerE film. Fall potato's tuber yields were remarkably affected in the plot of soybean, red clover and pioneer 855F+cultivation of fall potato. T-N, K and Ca contents of fall potato(stem and tuber) also tended to increase by the cultivation of green manual crops and mulching of P\ulcornerE film. T-N, K and Ca contents of soil tended to increase after the cultivation of green manual crops and mulching of P\ulcornerE film and then reduced to contents of soil before green manual planting after potato harvesting.

• Applied Chemistry for Engineering
• /
• v.7 no.1
• /
• pp.162-170
• /
• 1996

Light cycle Oil(LCO) contains 2,6-dimethylnaphthalene (2,6-DMNA) which is used as the basic material for high performance engineering plastics and liquid crystal polymer. This study was experimentally investigated to concentrate a mixture of dimethylnaphthalene(DMNA) isomers in the LCO by extraction-distillation combination as a pretreatment for separation and purification of 2,6-DMNA in the LCO. Furthermore, concentration of a mixture of DMNA isomers in the LCO compared between distillation and extraction-distillation combination. The recovery of aromatics in the LCO was performed by batch cocurrent multistage extraction with dimethylsulfoxide and water mixture as solvent. The concentration of naphthalene group(carbon number 10-12) in the extracted mixture is higher than that in the LCO. The yield for naphthalene group increased with decreasing carbon number. The yield for a mixture of DMNA isomers obtained in 5 equilibrium extration runs was about 65%. the separation of individual components with extractedmixture was tested by batch distillation. Futhermore, for recovery of a mixture of DMNA isomers of high concentration, distillate containing DMNA was distilled. As a result, a mixture of DMNA isomers with high concentration such as 60wt% was recovered. The extraction-distillation combination was more effective than the distillation to concentration a mixture of DMNA isomer in the LCO.

• Fire Science and Engineering
• /
• v.33 no.3
• /
• pp.21-28
• /
• 2019

To examine the mechanical and combustion characteristics of FRTP, either polycarbonate or nylon were used as a matrix, and either glass fiber or carbon fiber were used as the fiber reinforcement. The fiber reinforcement content was differentiated at 0~40 wt%. The tensile strength and heat distortion temperature increased with increasing reinforcement content. When the fiber reinforcement content was above 30 wt%, the flammability rating showed V-0. As the fiber reinforcement content increased from 0 to 40 wt%, the peak heat release rate of polycarbonate decreased by approximately 51% and that of nylon decreased by approximately 24%. The rate of CO generation decreased for a period of time, and then increased. This appears to have resulted from incomplete combustion. The rate of CO₂ generation shows a similar tendency with the heat release rate. As fiber reinforcement content levels increased from 0 to 40 wt%, the CO₂ peak rate of polycarbonate generation decreased by approximately 50% and that of nylon decreased by 28%.

• Asian Journal of Turfgrass Science
• /
• v.20 no.1
• /
• pp.107-118
• /
• 2006

This study was carried out to introduce a couple of commercialized patented technologies in the area of turfgrass production. All sod production related patents in Korea during the period from Dec. 20, 1948 to Dec. 30, 2005 were reviewed. Details of two patents (patent No. 0434389 and 0478194) were included. The results are summarized as follows: 1. One of the domestic patents on sod production was the technique using natural and plastic films. Information on topsoil mixtures was also reviewed form foreign patents. 2. Patented multi-purpose sowing equipment can evenly mix soil, sand, fertilizer and other soil conditioners with seed, stolen and rhizome of turfgrass. 3. Patent on cool-season turfgrass sod production provide topsoil mixture combination and mixing ratio for sports field, landscape area and roof garden.

• Korean Journal of Optics and Photonics
• /
• v.21 no.1
• /
• pp.26-32
• /
• 2010

Line lamps, which utilize leaky optical fibers based on periodic bending of plastic optical fibers, are proposed. The LED-optical fiber coupler, the key component of the line lamp, is designed and analyzed. The analysis by the Monte Carlo photon simulation method has shown that the optical coupling efficiency is affected rather sensitively by $\theta_w$, the slanting angle of the reflecting cup sidewall and $\rho_{ref}$, the reflectivity of the reflecting cup. The optical coupling efficiency of the coupler reaches the maximum when $\theta_w$ is about $60^{\circ}$, which is significantly larger than $\theta_w=45^{\circ}$, the typical sidewall slanting angle of the reflecting cup adopted in most LED lamps. When the reflectivity of the reflecting cup is above 0.8, the optical coupling efficiency is larger than 80%, which is the typical efficiency to be achieved in LD-optical fiber coupler.