• Journal of the Korean Wood Science and Technology
• /
• 제28권3호
• /
• pp.34-41
• /
• 2000

Recently many scientists have tried to synthesize biodegradable polymers due to durable and non-biodegradable products of conventional synthetic plastics when these were wasted in nature. So to reuse the wastepapers for biodegradable polymer resources, ONP (old newsprint), OCC (old corrugated containerbpard) were carried out by the pretreatment of chlorinite, hypochlorite and oxygen-alkali treatment conditions. For manufacturing of biodegradable polymer with wastepaper, this study performed to investigate change of chemical components and optimal pretreatment condition. The summarized results in this study were as follows: Lignin content in ONP and OCC was was higher than in MOW and ash content was the highest in MOW. More amount of ash components were reduced by wet defiberation than by dry defiberation. Wet defiberation fiber are better than dry defiberated fiber in chemical pretreatment condition for wastepapers, and the best result was obtained in the condition of sodium chlorite at $70^{\circ}C$, because it has high delignification ratio, ${\alpha}$-cellulose contents and degree of polymerization in this treatment condition. Oxygen-alkali treatment condition is the worst method because of low yield, low degree of polymerization in this pretreatments.

• Journal of the Korean association of regional geographers
• /
• 제19권4호
• /
• pp.641-653
• /
• 2013

This study analyzed the location of manufacturing industries and works' residence in Yangsan city of which large part of industries were relocated from Busan metropolitan area along the industrial suburbanization process. Through the field survey, in-depth interview, and analysis of statistical data, the study tried to describe the relocation characteristics of manufacturing industries in Yangsan city. The results of the analysis are as follows: 1. The relocation rate of manufacturing industries from Busan to Yangsan was very high in 1980s. As a result of analysis, the first prime factor on relocation was the site problem for industrial land use. But for the newly starting industries, the most important factor was the subcontract networks among industries which differed from relocated ones. 2. The industrial suburbanization process influenced on the industrial structure strongly, as the compositional weight of rubber and plastic industries in Yangsan became greater and the size of the major plants got larger. 3. The manufacturing industries in Yangsan city were widely distributed on the main national industrial districts. Also, they were diffused out to the other places beyond the boundary of industrial districts. 4. The commuting workers' residence in Busan, employed by the plants of Yangsan marked 44.5%. That confirmed the strong influence of Busan labor market.

• Fire Science and Engineering
• /
• 제24권2호
• /
• pp.82-88
• /
• 2010

In this study, we have performed several tests for composite plastic materials to be applied on interior materials of a vehicle to identify their combustion characteristics using cone calorimeter, smoke density chamber and toxicity index chamber. We have prepared a total of 12 samples for 4 major parts of a vehicle wherein each major part has 3 different materials. The results of cone calorimeter test showed ignition time of PVC sheet and PVC leather were 2s. The 8 samples showed under less than 10s of ignition time. The sample comprising Nylon and PE had the biggest maximum heat release rate of 635 $kW/m^2$. The sample comprising Rubber showed the smallest maximum heat release rate but with the biggest total heat release. The results of smoke density chamber test showed the sample that is made up with Rubber had the biggest specific optical smoke density. The sample comprising PVC leather and PUR showed the biggest VOF4 which enables the initial smoke production. The results of toxicity index test showed that all samples contained carbon dioxide content exceeding its lethal concentration. The sample comprising PVC showed high content of hydrogen chloride and hydrogen bromide. The PVC sheet showed the biggest toxicity index calculated by using lethal concentration and test results. Toxicity index of all sample wes over 1.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• 제23권3호
• /
• pp.238-244
• /
• 1990

The behavior of conger eel, Astroconger myriaste(Brevoort), to the net pots with baits was investigated alternately in two experimental water tanks. One of the pots being dropped on the tank bottom, the eels increased rapidly in number of touching the pot to show a maximum whithin 30 minutes and then decreased gradually. The enterings of eels into the pots were also made mainly within 30 minutes and easier in pots with lower entrances. But the complete enterings were decided by the passage of eel tails through the pot entrances and so the eels retreated frequently after attemping to enter the pots, especially in pots small in the interval between the entrances and the baits or in pots with flappers. However, most of enterings encouraged the touches and earlier enterings ascribed earlier production of maximum touch. The eels, if entered the pots without flappers, got out of the pots relatively easily and the getting-out was easier in pots with lower entrances. On the other hand, the eels entered the pot with flappers could not get out of the pots. A comparison between the circular and square pots gave that the guidance of eels to the entrances was easier in the former and the passing of eels through the entrances in the latter, not only at the inside of pots but also at the outside. The general behavior of eels in touching or entering the net pots in the above results was almost equal to that on the bamboo and plastic pots in the previous paper.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• 제24권1호
• /
• pp.1-11
• /
• 2018

In this study, pro-oxidant($d2w^{(R)}$) and rPP/ZnO nanocomposite flexible films for food packaging were prepared, and their mechanical and antimicrobial properties were investigated. As a result, the carbonyl index and hydroxyl index increased with exposured time to heat and UV rays. Surface analysis showed that the addition of zinc oxide improved the dispersibility and compatibility of the polymer, so that the surface of the composite film was smooth and the zinc oxide particles were smaller than the compared film. And it kept the physical properties by heat and UV ray blocking effect, and it worked to reduce decomposition. In the antimicrobial activity test, the microbial reduction rate was 3 logs or more at the use concentration of zinc oxide. The tensile strength was increased and the elongation was decreased. Oxidative degradability of multi-layered film in UV exposured for 72 hours, the molecular weight of the film decreased by 75.6%, 1,294 g/mol Mn and 5,920 g/mol Mw. In the safety analysis of food packaging materials, we obtained that are in standard of polypropylene, a food contact material of domestic law.

• Korean Journal of Agricultural Science
• /
• 제28권2호
• /
• pp.99-107
• /
• 2001

It is difficult to install a ventilation window on the roof of single span greenhouses of arch shape. Investigation on the roof ventilation structures for those greenhouses was conducted. In small greenhouses with spans of 5 to 8 m, circular or chimney type ridge vents made of plastic were employed. In large greenhouses with spans of 12 to 18 m, even span roll-up ridge vents made of steel pipe were employed. The effect of roof ventilation was evaluated by comparative experiments between greenhouse installing ridge vents and having controlled side vents only. Roof ventilation contributed greatly to restraint of temperature rise and maintenance of uniform temperature distribution in greenhouses. And ventilation efficiency was analyzed by experiments on the opening and closing operation of the ridge and side vent. There were no temperature differences according to opening and closing sequence of ventilation window. But for greenhouse temperature control by ventilation, it is desirable to open side vents after ridge vents and to close ridge vents after side vents.

• Korean journal of applied entomology
• /
• 제46권2호
• /
• pp.325-330
• /
• 2007

Among various food base baiting materials, beer and macerated cucumber were the most effective to induce slug that is a troublesome pest on leafy vegetables, especially on lettuce. However, the baits attracted only but did not kill the pest. When the baits were combined with various insecticidal organic materials, a few combinations such as beer and cigarette mixture successfully induced and killed the slug in the field test. The most effective combination of beer 50ml and a cigarette contained in a small plastic box killed 25 slugs per night. While macerated cucumber 50ml and a cigarette mixture killed only 4.3 slugs. The bait of beer and cigarette mixture revealed 68.4% control value against slug damage when treated for 3 consecutive days in a lettuce cultivation greenhouse. The bait also effectively reduced the slug damage in a lettuce nursery showing 58.3% control value. The method seemed highly useful for the control of slug in the organic farming system in which application of pesticides are strictly prohibited.

• Elastomers and Composites
• /
• 제41권2호
• /
• pp.97-107
• /
• 2006

The recycled polyethylene composites with various ratio of ground waste tire powder were manufactured by using a fully intermeshing co-rotating twin screw extruder for the reuse of waste tire scrap. In this investigation, the ground waste tire powders (GWTP) were blended with virgin HDPE and recycled polyethylene in the weight ratio of 0 to 50 wt.%. Mechanical properties such as tensile strength, elongation at break and impact strength were measured by using ASTM standard. The experimental results for the various composite showed that the tensile strength of composites decreased with increasing GWTP ratio, while elongation at break increased with the amounts of GWTP. On the other hand, the impact strength for the three kinds of composites showed maximum at the 30 wt.% of GWTP and then decreased. Morphology of the fracture surface tends to be rough with increasing waste tire powder content. Rheological properties were investigated by measuring the shear viscosity against shear rates and softening temperatures. They showed that melt viscosity of rubber composites in this study subsequently increased with increasing GWTP content as a result of increase of flow resistance against external stress and followed a Power-law behavior.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 한국생물환경조절학회 2001년도 봄 학술발표논문집
• /
• pp.71-72
• /
• 2001

최근 수출오이의 재배 면적이 계속증가 추세에 있어 '99년 현재 143ha에 달하고 있다. 그러나 수출오이는 국내 오이와 재배방법이 상당히 달라 국내 오이는 주지착과형이지만 수출오이는 측지착과형으로 측지의 발생여부에 따라 수확량의 차이가 심하다. 따라서 수출오이의 성공여부는 측지발생을 어느정도 시키느냐에 달려 있다고 해도 과언이 아니다. 그런데 수출오이의 재배시기는 우리나라에서 재배환경이 가장 불량한 겨울철(10-2월)로, 저온 및 투광량 부족 등으로 인하여 측지발생율이 매우 저조하다. 따라서 본 시험은 수출오이의 측지 발생율을 높이고자 지중가온기 설치 여부에 따른 효과를 구명하고자 실시하였다. 그 결과, 생육(Table 1)은 접수의 줄기 직경이 지중가온 처리시 10.22mm로, 무가온의 8.64mm보다 굵었고, 엽장과 엽폭에 있어서도 지중가온 처리가 무가온 처리보다 좋았다. 곡과 발생수에 있어서도 지중가온 처리는 주당 0.73개가 발생하였으나, 무가온은 1.26개가 발생되어 지중가온 처리시 무가온에 비해서 생육이 좋아지고, 곡과 발생이 적었다. 주당 측지발생수(Table 2)는 지중가온구가 13.7개였고, 무가온구는 11.7개로 지중가온을 하면 측지발생수가 증가함을 알수 있었다. 또한 상품수확과수에 있어서도 지중가온구는 주당 45개인데 반해 지중무가온구는 38개였으며 따라서 전체적인 수량이 10a당 8,100kg으로, 무가온구의 6,840kg보다 18%의 증수효과가 있었다. 따라서 수출오이재배시 지중가온을 하면, 측지발생수가 증가하고 특히 장측지(Fig. 1)가 다수 발생하여 측지 수확과수가 증가하며, 곡과 등 기형과 발생이 감소하여 상품수량이 증가되므로써 기존 지중 무가온 재배에 비해 14% 소득향상 효과를 기대할 수 있다.시 생장이 둔화되었다. 밀폐시킨 삼각플라스크에서 자라는 Cell은 상태도 좋지 않고 전반적인 증식량도 적었다. Cell은 환기정도에 민감한 것으로 판단되며 삼각플라스크에서 약 35일 정도의 생장 주기를 가지는 것으로 사료된다. 배양 3주까지는 플라스틱 뚜껑으로 밀폐시킨 bottle에서 가장 많은 체세포배를 얻었다. Air filter를 달아 2일 마다 신선한 공기를 넣어 주었을 때는 배의 발달이 많이 늦어져 배양 3주째에 다른 처리보다 배의 수가 훨씬 적었다. 체세포배가 발달하는 동안에는 산소를 많이 요구하지 않으나 성숙하는 동안에는 산소를 많이 요구하는 것으로 생각된다.적인 것으로 나타났다. 다만, 곡선형은 물론 직선형에서도 열교환 튜브의 배치밀도, 튜브 길이 및 두께 등의 변화에 따른 최적화 연구가 수반되어야 할 것으로 판단된다.에서 제공된 API는 객체기반 제작/편집 도구에 응용되어 다양한 멀티미디어 컨텐츠 제작에 사용되었다.x factorization (NMF), generative topographic mapping (GTM)의 구조와 학습 및 추론알고리즘을소개하고 이를 DNA칩 데이터 분석 평가 대회인 CAMDA-2000과 CAMDA-2001에서 사용된cancer diagnosis 문제와 gene-drug dependency analysis 문제에 적용한 결과를 살펴본다.0$\mu$M이 적당하며, 초기배발달을 유기할 때의 효과적인 cysteamine의 농도는 25~50$\mu$M인 것으로 판단된다.N)A(N)/N을 제시하였다(A(N)=N에 대한 A값). 위의 실험식을 사용하여 헝가리산 Zempleni 시료(15%$S_{XRD}$)의 기본입자분포로부터 %$S_{XRD}

• Resources Recycling
• /
• 제22권6호
• /
• pp.3-11
• /
• 2013

This study was carried out to estimate greenhouse gas reduction potentials under treatment methods of combustible wastes excavated from closed landfill. The treatment methods of solid wastes were landfilling, incineration, and production of solid recovery fuel. The greenhouse gas reduction potentials were calculated using the default emission factor presented by IPCC G/L method of IPCC (Intergovernmental Panel on Climate Change). The composition of excavated waste represented that screened soil was the highest (65.96%), followed by vinyl/plastic (19.18%). This means its own component is similar to the other excavated waste from unsanitary landfill sites. Additionally, its bulk density was 0.74 $t/m^3$. In case of landfilling of excavated waste, greenhouse gas emission quantity was 60,542 $tCO_2$. In case of incineration of excavated waste, greenhouse gas emission quantity was 9,933 $tCO_2$. However, solid recovery fuel from excavated waste reduced 33,738 $tCO_2$ of the greenhouse gas emission quantity. Therefore, solid recovery fuel production is helpful to reduce of greenhouse gas emission.