• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.1
• /
• pp.61-67
• /
• 1997

This experiment was carried out from 1979 till 1983 to elucidate the underdrainage effect on soil salinity and growth of rice plastic underdrainage was established 5m and 8m intervals in April of 1979 and Jinjubyeo the medium maturing rice variety was transplanted by hand at late of May. The results are as follow; The desalination effect was higher in 5m interval underdrainage than 8m interval underdrainage and the salt content was lower than 0.3％ at 1 year after in 5m interval, 2 years after in 8m interval underdrainage and 3 years after at control. Farther the distance from underdrainage position, less the desalinization rate that desalinization was least at center part of the underdrainage position. Desalinization effect was highest 30cm of soil depth and decreased deeper than it. Shorter the underdrainage interval, more the panicle number, heavier 1, 000 grain weight and higher the milled rice yield. But the milled rice yield wasn't significantly different between the underdrainage interval from 3 years after underdrainage.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.5
• /
• pp.551-556
• /
• 2007

High pressure storage of the agent gas in fire suppression system was composed of tank, main valve and safety valve, which prevents the fracture of the high pressure storage. The safety valve has circular thin plate as fracture plate that was destroyed over fracture pressure. When inner pressure of the storage is reached the fracture pressure, the safety valve discharges gas and degrades simultaneously the inner pressure of the storage. There are design variables such as flow path diameter, inner diameter of the plastic packing ring, thickness of plate and fillet radius. In this variables, thickness of plate is set to be a value of 0.2mm. The main effect of variables on the inner pressure, has been decided using factorial design and statistical analysis. Therefore, the relation of variables are expressed by regression equation. It is disclosed results that the difference of fracture pressures between the equation and experiment has $2{\sim}5%$. Finally, using response surface method, the optimal design of the safety valve could be decided with safety pressure of 25MPa, where the fracture occurs on circular thin plate.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.2
• /
• pp.95-101
• /
• 2009

The surface characteristics of Zachery-treated turquoise stones have been studied in detail with a comparison of natural and plastic-impregnated turquoise. The SEM-EDS analysis exhibited that Zachery-treated turquoise was characterized by the uniform distribution of potassium element through the specimen and did not show the sharp crystalline $SiO_2$ facet and boundary phase which are common in natural ore. The potassium element shown in the Zachery-treated turquoise seemed to be occurred during the treatment process for the improvement of durability. The bar-shaped crystals observed in the pore was found to be a feature of Zachery treated turquoise and are expected to influence on their stability and durability, while the pore sizes in turquoise stones depends on the parameter of the treatment procedure.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.4
• /
• pp.503-509
• /
• 2013

Carbon fiber reinforced plastics (CFRPs), a composite material, are generally vulnerable to compressive load and impact damage in a direction perpendicular to the surface of the material. In particular, during the operation of an aircraft, impact damages caused by bird collisions or falling tools reduce the strength of the aircraft structure. In this study, after impact damages were applied to CFRP specimens with various impact energies and impactor diameters, the compressive residual strength of the impact-damaged specimen was evaluated by performing a compression test. Furthermore, a prediction model for the compressive residual strength is proposed according to the variation in the impact energy by comparing the test results.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.2
• /
• pp.192-198
• /
• 1999

A pot experiment was carried out to investigate the effect of boron on the growth, symptom, yield, and content of boron in Perilla(Perilla frutescens var. japonica HARA), Melon(Cucumis melo L.) and Cucumber(Cucumis sativus L.). The results obtained are as follows. Perilla. melon and cucumber uptake a lot of boron from the soil, and toxic effects of boron result in leaf tip yellowing by progressive necrosis. Yield of perilla, melon and cucumber are decreased at the $3{\sim}5mg\;kg^{-1}$, $5{\sim}10mg\;kg^{-1}$ of boron applicated in soil, respectively. Boron content in the leaf is the highest among various parts plant, and the tip and margin of the leaf contained more boron than central part of the leaf. Boron applicated was moved and accumulated to the plant and soil.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.53-53
• /
• 2011

Poly(lactic acid)(이하 PLA라 칭함)는 1970-80년대의 초기 연구에서는 높은 제조비용과 희귀성에 의해 봉합사와 약물전달시스템으로 용도가 제한적이었으나 1980년대를 거쳐 1990년 이후 농업의 혁신적인 변화를 거쳐 옥수수의 다양한 측면의 이용의 하나로서 6-7년 전부터 양산화에 성공하여, 의류, 필름 및 플라스틱의 여러 가지 분야에서 적용가능성을 모색하고 있다. PLA의 장점은 석유가 아닌 천연 원료에서 얻을 수 있으며, 기존의 합성섬유와는 달리 일정한 조건하에서 미생물 등에 의해 물과 이산화탄소로 90% 이상 분해되는 친환경적인 소재이다. 합성섬유에서 의류용으로 대부분 사용되는 폴리에스테르(이하 PET라 칭함)와 유사한 물성을 가지고 있는 PLA섬유는 PET섬유와 유사한 분산염료로 염색할 수 있다. 따라서 PLA섬유는 분산염료에 의한 염색법을 중심으로 연구되어지고 있으나, PET 섬유의 융점이 $254^{\circ}C$부근인 반면, PLA섬유는 $160-170^{\circ}C$부근이다. 이로 인해 PLA를 섬유로 용도전개에 있어서 약점으로 작용하고 있다. 그러나 PLA섬유는 특유의 경량감과 새로운 촉감 등의 많은 장점을 지니고 있어 여러 가지 용도전개가 되어지고 있다. 초음파는 사람이 들을 수 없는, 사람마다 한계값은 다르지만, 주파수 약 25kHz이상의 음파를 말하며, 주파수가 높고 파장이 짧기 때문에 강한 진동을 수반한다. 초음파의 이용 원리는 Cavitation이라는 현상으로 생성된 기포가 터지면서 강력한 에너지를 방출한다. 이것은 강력하여 사방으로 퍼져 물질표면이나 내부에 영향을 미친다. 섬유에서는 표면에 뭍은 불순물을 제거하는 세정 등에 응용되고 있으며, 염색분야에서도 다양하게 연구되어지고 있다. 본 연구에서는 초음파에 의한 PLA섬유의 염색성을 조사하였다. PLA섬유를 정련하여 초음파작용의 유무에 따라 염색하여 그 결과를 고찰하였다. 초음파 작용에 따른 분산염료의 표면 색변화는 없었으며, 섬유 표면 색 농도의 차이는 초음파 작용에 의하여 저온에서는 차이가 나타나지만, 고온인 $80^{\circ}C$에서는 오히려 낮아졌다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.217-223
• /
• 2019

The application of 3D printing technology is expanding due to the production of the complex-shape parts and the one-step manufacturing process. Moreover, various technical solutions in 3D printing are emerging through continuous research and development. Representative technologies include SLS technology, in which a desired area is sintered and laminated by irradiating a powder-type material with a laser. In addition, high-performance engineering plastic parts are being manufactured in increasing numbers. In this study, tensile specimens were fabricated from polyamide 12, a widely available polymer, and the glass bead-reinforced polyamide 12. The specimen-build orientation was divided into 0°, 45°, and 90° on the fabrication platform, and the tensile test temperature was -25℃, 25℃, and 60℃. The test results showed that the tensile modulus of both materials decreases as the build orientation becomes closer to 90°. In addition, the tensile strength of glass bead-reinforced PA12 showed more dependence on the build orientation than PA12. In addition, the tensile modulus and tensile strength decreased with increasing test temperature.

• Resources Recycling
• /
• v.24 no.1
• /
• pp.43-50
• /
• 2015

An extensive literature survey and personal communication with relevant experts made it possible to understand economic and technical feasibility of disposable diaper recycling. Commercial level of soiled diaper recycling technology is currently available from a Dutch company, Knowaste Co., who owns a proprietary separation technology of the pulps, plastics and super absorbing polymer (SAP). In Korea, on the other hand, pre-consumer diaper recycling technology without material separation at its infancy converts manufacturing scraps into refuse plastic fuel (RPF), container/truck cargo boards or automobile boards/sheets. Although previous studies on feasibility of post-consumer recycling in Korea showed mutually contradictory implication, it was found out in this research that significantly positive economic feasibility can be obtained with pre-consumer diaper recycling. Subsequent recycling R&D including pre-consumer scrap and policy support may expedite 'Establishment of Sustainable Society.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.10
• /
• pp.876-882
• /
• 2018

The purpose of this research is to verify the feasibility of Plastic Ball Grid Array (PBGA), one of the most popular chip packaging types for commercial electronics, under strong random vibration occurred in satellite during launch. Experiment were performed by preparing daisy chained PCB specimen, where large size PBGA were surface mounted, and the PCB was fixed to an aluminum frame which is commonly used to install the electronics parts to satellite. Then the entire sample was fixed to vibration tester. The random vibration power spectrum density employed in the tests were composed of two steps, the acceptance level of 22.7 Grms, and qualification level of 32.1 Grms with given period of time. The test results showed no solder cracks, which provided the strong structural integrity and feasibility evidences of the PBGA packaging to aerospace electronics. Numerical analyses were also performed to calculate the solder stresses and analyze their development mechanism.

• Progress in Medical Physics
• /
• v.6 no.2
• /
• pp.35-40
• /
• 1995

Purpose: We have developed new film dosimetry algorithm for personal dosimetry and examined its characteristics. Materials and methods: Agfagaevart personal monitoring 2/10 films are used. Films which are in the film badges filtered with Cu 0.3mm, plastic 1.5mm, Aluminum 0.6mm and tin 0.8mm, were exposed by standard dosimetry laboratory. Irradiated energy categories are ANSI N13.1l Category III, and IV. Manual type film precessor and X-rite film densitometor was used. Filtered densities to energy relations and does to transformed densities relations can be obtained ofter transformation of H＆D curves to linear shape by polynomal fitting. Reults : Personal dose be determined within 25％ error for category m and 15％ for category IV. And we are able to evaluate the exposed energy. Conclusion : New algorithm developed in this study is good for personal dosimetry within 30％ error range for catergory III and IV. It is expectd to be complete personal dosimetry algorithm with further study for categrory, I, Dand II V.