• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.3
• /
• pp.10-21
• /
• 2021

Recently, the demand for atypical structures with functions and sculptural beauty is increasing in the construction industry. Existing mold-based structure production methods have many advantages, but building complex atypical structures represents limitations due to the cost and technical characteristics. Production methods using molding are suitable for mass production systems, but production cost, construction period, construction cost, and environmental pollution can occur in small quantity batch production. The recent trend in the construction industry calls for new construction methods of customized small quantity batch production methods that can produce various types of sophisticated structures. In addition to the economic effects of developing related technologies of 3D Concrete Printers (3DCP), it can enhance national image through the image of future technology, the international status of the construction civil engineering industry, self-reliance, and technology export. Until now, 3DCP technology has been carried out in producing and utilizing residential houses, structures, etc., on land or manufacturing on land and installing them underwater. The final purpose of this research project is to produce marine structures by directly printing various marine structures underwater with 3DCP equipment. Compared to current underwater structure construction techniques, constructing structures directly underwater using 3DCP equipment has the following advantages: 1) cost reduction effects: 2) reduction of construct time, 3) ease of manufacturing amorphous underwater structures, 4) disaster prevention effects. The core element technology of the 3DCP equipment is to extrude the transferred composite materials at a constant quantitative speed and control the printing flow of the materials smoothly while printing the output. In this study, the extruding module of the 3DCP equipment operates underwater while developing an extruding module that can control the printing flow of the material while extruding it at a constant quantitative speed and minimizing the external force that can occur during underwater printing. The research on the development of 3DCP equipment for printing concrete structures underwater and the preliminary experiment of printing concrete structures using high viscosity low-flow concrete composite materials is explained.

• Journal of the Korea Convergence Society
• /
• v.10 no.3
• /
• pp.49-57
• /
• 2019

The core technology development of the Fourth Industrial Revolution is linked to the development of other core technologies, which will change the industrial structure in the future and create a new smart business model. In this paper, tried to analyze the technology maturity level and analyze the technology maturity. To do this, used technology trend information to investigate and integrate the market, policy, etc. Of core technology of the 4th Industrial Revolution to achieve a comprehensive maturity level. Because technology maturity measures are scored by technology developers, prejudices may be acted upon according to a person's tendency, which may be a subjective evaluation. It is also a measure of the maturity of individual technologies, and thus is not suitable for evaluating the overall system integration perspective. However, it is possible to evaluate the maturity before integrating the core element technologies constituting the whole system and to use it as a means to compare the effect of the whole system and its feasibility and play an important role in the planning of technology development.

• 재활복지
• /
• v.22 no.3
• /
• pp.23-39
• /
• 2018

The fourth industrial revolution and technological innovation will make the job factor of people with disabilities complicated and difficult. Thus, this study analyzed the technical factors influencing the job structure and tried to find a way to develop the job of the people with disabilities in response to the 4th Industrial Revolution by changing the labor market and changing the trend of the employment by industry. The methods for this study are literature research and FGI. First, technological factors affecting the job structure of the Fourth Industrial Revolution are artificial intelligence, Internet and networking of things, 3D printing, big data, Second, technological innovation due to the industrial revolution was a major factor in the job structure. As the industrial revolution and technological innovation progressed, the job structure shifted rapidly from the manufacturing industry to the service industry, Third, as the measures of the 4th Industrial Revolution and the change of the job structure, it is necessary to make preemptive investment for the development of competency to cope with technological innovation, Finally, in order to respond to the Fourth Industrial Revolution and the rapidly changing technological innovation, the basic data of people with disabilities should be able to be big data.

• Journal of the Korean Society of Radiology
• /
• v.12 no.7
• /
• pp.879-886
• /
• 2018

A 3-dimensional (D) printer is a device capable of outputting a three-dimensional solid object based on data modeled in a computer. These features are utilized in the bone model X - ray phantom production etc using CT data by fusing with the radiation science field. A bone model phantom was made using data obtained by CT scan of an existing Pelvis phantom, using PLA, Wood, XT-CF20, Glow fill, Steel filaments which are materials of Fused Filament Fabrication (FFF) 3D printer.Measure Hounsfield Unit (HU) with images obtained by CT scan of the existing Pelvis phantom and five material phantoms made with 3D printer under the same conditions,SI and SNR were measured using a diagnostic X-ray generator, and each phantom was compared and analyzed.As a result, the X - ray phantom in the X - ray examination condition of the limb was found to be most suitable for the glow fill filament.The characteristics of the filament can be known to the base of this research and the practicality of X - ray phantom fabrication was confirmed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.3
• /
• pp.312-320
• /
• 2019

One of the fastest growing segments of implant dentistry is the utilization of computed tomography (CT) scan data and treatment planning software in conjunction with guided surgery for implant reconstruction cases. Computer assisted planning systems and associated surgical templates have established a predictable, esthetic, functional technique for placing and restoring implants. Especially, a philosophy of restoratively driven implant placement has been generally adopted. Recently, a variety of commercial dental fields have released their scanning and fabricating protocols and methods for restorations. This process is still being investigated and developed for the most precise and predictable outcome. This case report describes a female patient who wanted dental implants in fully edentulous areas. Restoratively driven implant placements were performed with surgical guide and the patient was fully satisfied with the clinical results, and at 5-year post restorative follow-up assessment, both implant and prosthesis were proved clinical success.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.1
• /
• pp.95-103
• /
• 2019

Lips have a defect in maintenance of moisture due to their thin layer. As aging progresses, lips lose volume and redness, and become wrinkled. Fat grafting and filler surgery have been used to achieve attractive lips, but little research has been reported to develop better materials to replace the present methods. Recently, a study suggests that the increase of adipocyte number can be enhancing the expansion endogenous fat. In previous study, we identified that the efficacy of Magnolia officinalis bark extract (MOBE) was effective on the induction of adipogenic differentiation. In this study, we confirmed that MOBE enhanced the differentiation of human adipose-derived stem cells on the fat mimic 3D structure built by 3D bioprinting method From further experiments in human, we established a method to quantify the severity of lip wrinkle by measurement of standard deviation of gray value using Image J software. Finally, we found that topical treatment with 1% MOBE formulated lip balm significantly improved the lip wrinkle after using for 12 weeks. In conclusion, these findings suggest that MOBE has great potential, as a cosmetic ingredient, to reduce the lip wrinkle through the effect of promoting adipogenic differentiation.

• Journal of Practical Engineering Education
• /
• v.10 no.1
• /
• pp.17-24
• /
• 2018

Through the design and production of works for the third semester as a major unit, It is proposed the process of satisfying the graduation standards with the design and production process of the drone which can be applied to various mobile environments. Using the shape of Ring Propeller, it is made to be able to play both the role of generating lift as a propeller and the role of a wheel that touches the ground through the surface of the rim. In addition, the Servo Motor is used to convert the drive shaft of the motor to the correct angle according to the command. Then, based on the idea, the 3D printing is implemented to confirm the result of the configuration, and the circuit for driving the propulsion is designed and manufactured. As a result, the conversion of the desired propulsion system during air navigation and operation failed due to the weight increase of the propellant. It is confirmed that the size of the thrust and the tolerance limit of the ring propeller are the errors. Through these processes, it has been recognized to have experience of creative thinking and cooperation through engineering approach and comprehensive design, and confirmed to satisfy the graduation criteria by writing an engineering paper on the result.

• Journal of Internet Computing and Services
• /
• v.20 no.1
• /
• pp.17-24
• /
• 2019

Since the information of $4^{th}$ Industrial Revolution is introduced in WEF (World Economic Forum) in 2016, IoT, AI, Big Data, 5G, Cloud Computing, 3D/4DPrinting, Robotics, Nano Technology, and Bio Engineering have been rapidly developed as business applications as well as technologies themselves. Among the diverse business applications for IoT, wearable devices are recognized as the leading application devices for final customers. This longitudinal study is compared to the results of the 1st study conducted to identify customer needs of activity trackers, and links the identified users' needs with the well-known marketing frame of marketing mix. For this longitudinal study, a survey was applied to university students in June, 2018, and ANOVA were applied for major variables on usable features. Further, potential customer needs were identified and visualized by Word Cloud Technique. According to the analysis results, different from other high tech IT devices, activity trackers have diverse and unique potential needs. The results of this longitudinal study contribute primarily to understand usable features and their changes according to product maturity. It would provide some valuable implications in dynamic manner to activity tracker designers as well as researchers in this arena.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.54 no.2
• /
• pp.145-151
• /
• 2021

When manufacturing Alaska pollack Gadus chalcogrammus surimi for 3D printing, it examined the characteristics of physical properties and sensuality by adding polysaccharides alginic acid [0, 1, 2, 3% (w/w)]. As a result of the color value of surimi by adding alginic acid, it showed that the lightness of heated surimi containing 2% (w/w) alginic acid was the highest and ∆E value was the lowest. In the changes in physical properties, the heated surimi of 3% (w/w) alginic acid content showed the lowest values of hardness, springiness, cohesiveness, gumminess, chewiness and resilience, but the highest adhesiveness. In the case of fried surimi, its hardness, cohesiveness, gumminess, chewiness and resilience were the lowest at the content of 3% (w/w) alginic acid. After 7 days of cold storage, the hardness, gumminess, and chewiness of heated surimi with an alginic acid content of 2% (w/w) were significantly higher, and fried surimi was also the same. In the results of the sensory evaluation, there were significant differences according to the alginic acid content in hardness and fishy smell, and as the alginic acid content increased, it felt more fishy smell, resulting in poor preference.

• Conservation Science in Museum
• /
• v.25
• /
• pp.1-8
• /
• 2021

This study investigated White Porcelain Water Dropper with Openwork Lotus Scroll Design and Eight Trigram Design in Cobalt-blue Underglaze (hereinafter, the "water dropper") in the collection of the National Museum of Korea using computed tomography (CT). A replica was produced to examine both the structure and its original production method. The CT scanning identified no joint lines or pores in the clay, which suggests that the body (the lower part of the water dropper) was shaped in a single piece using a mold and was then matched with a mold-formed lid (the upper part of the water dropper). The inner container of the body portion was roughly trimmed with a bamboo knife so that its upper surface could be securely attached to the bottom of the lid and prevent any leakage in the joined surface. It appears that the inner container for storing water was made first in a cylindrical shape that met the unit of quantity used at the time and could be easily formed by molding. It was transformed into a trapezoid shape during the process of combining it with the lid. A cylindrical inner container was reproduced using silicon 3D printing to compare its capacity with that of the original inner container. The comparison revealed that the reproduced container had a capacity of 152.5㎖, whereas the original container holds approximately 168.6㎖, a figure similar to three hop (around 174㎖) in Joseon-period units of quantity. Since the capacity of the cylindrical inner container corresponds to a known measure from the late Joseon dynasty, it is likely that the water dropper was originally produced to contain a cylindrical inner container.