• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.04a
• /
• pp.78-81
• /
• 2010

ARINC 653은 통합형 항공전자 시스템에서 사용되는 응용프로그램 간의 인터페이스와 실시간 운영체제의 표준을 정의한다. ARINC 653에 정의되어 있는 네트워크 통신 인터페이스는 대형 항공기뿐만 아니라 무인 비행체와 같은 작은 항공체에도 적용이 가능하다. 이러한 작은 시스템에서는 TCP/IP와 같이 무거운 프로토콜보다는 경량의 실시간 프로토콜이 적합하다. 본 논문에서는 RTDiP을 이용하여 ARINC 653의 통신 인터페이스 중에서 Queuing-mode를 구현하고 성능 측정을 수행한다.

• Journal of KIISE:Information Networking
• /
• v.36 no.2
• /
• pp.118-129
• /
• 2009

The ISO 18000-7 Active RFID standard, a single channel system operating in the 433Mhz, faces technical difficulties in supporting some recently introduced application demands because of its low transmission rates and radio interference between readers. We propose a new multi-channel active RFID system operating in the 2.4Ghz. The special feature of the proposed system is that a reader makes use of multiple interfaces to improve its performance like a multi-core processor. However if only a small part of interfaces are actually used, the performance improvement would not meet the expectation. To overcome this problem, a new multi-channel multi-interface active RFID protocol, which balances communication loads among all available interfaces, is necessary. 3 protocols, named as "Aggregated", "LP-Combined", "AP-Balanced", are proposed. Through simulation, we compare them for various conditions by changing number of tags, number of interfaces, tag data size. AP-Balanced shows the best performance and its performance increases almost linearly as the number of interface increases, which meets our expectation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.95-98
• /
• 2009

RFID(Radio Frequency IDentification) technology is an automatic identification method using radio frequencies between RFID reader which collects the informatin and tag which transmits the information. RFID technology develops passive RFID which transmit the only ID to active RFID which transmit the additional information such as sensing information. there is ISO/IEC 18000-7 as typical standard of active RFID. it is single channel system of 433.92MHz and has limitation of collection of a number of tags. to overcome limitation of collection of many tags, we propose the new 2.4GHz active RFID technology which can use the multi-channel. if reader has multi-interface and uses another channel in each, reader could fast collect the tags. but, if a reader which has many interfaces collects tags through the specific interface, the performance may not improve any more comparing with a reader using single interface. in this paper, we show the fast collection through design and implementation of protocol for load balancing between interfaces in multi-interface RFID reader.

• Review of KIISC
• /
• v.12 no.6
• /
• pp.81-92
• /
• 2002

cdma2000 1xEV(Evolution)-DO(Data Only)는 기존의 IS-2000 무선 프로토콜과 달리 패킷 데이터 서비스를 위한 전용 프로토콜로, 최대 2.4Mbps의 전송 속도를 제공한다. cdma2000 1xEV-DO는 이전의 프로토콜과 단리 무선 인터페이스 계층 구조에 따로 분리된 시큐리티 계층(security layer)을 가지며, 이 시큐리티 계층에서 패킷 데이터 서비스를 위한 인증과 암호화 서비스를 제공한다. 본 고에서는 패깃 데이터 서비스를 위한 전용 프로토콜인 chma2000 1xEV-DO의 시큐리티 계층의 4가지 프로토콜인 키 교환 프로토콜, 인증 프로토콜, 암호화 프로토롤, 시큐리티 프로토콜을 분석한다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.3
• /
• pp.609-616
• /
• 2018

The purpose of this study is to describe the technologies necessary to design responsive web with the use of the responsive website based on implementation structure as a prototype. Responsive design means the process of analyzing prototype requirements on the basis of implementation and applying the analysis results to development. The design method based on the principle of priority in development was established, and then flexibility and variability through design formula were set up. After that, the user-oriented primary principle and secondary principle were drawn to establish implementation structure. In the way of discussing compression technologies, a method of combination was searched for, and then a method of asynchronous script scalability in line with a web prototype was found. Today, a website or a web application needs to be adopted and accessed regardless of device types. As a solution, a responsive website design method was found. Important technologies for the implementation structure for the responsive website design method and its relevant prototype website were came up with.

• Electronics and Telecommunications Trends
• /
• v.16 no.2 s.68
• /
• pp.53-62
• /
• 2001

BICC 프로토콜은 광대역 패킷 네트워크 위에서 기존 PSTN/ISDN 네트워크 인터페이스와 서비스에 어떠한 영향도 주지 않으면서 PSTN/ISDN 서비스를 제공하기 위한, ISUP 신호 프로토콜 기반의 호 제어 신호 프로토콜이다. 본 고에서는 BICC 네트워크의 구조 및 구성 요소, BICC 프로토콜의 동작 절차, 그리고 BICC 표준 문서의 구성과 체계를 소개한다. 또한 IP 베어러 연결을 설정하기 위하여 새로 정의한 IPBCP 프로토콜을 기술하고, 마지막으로 향후 BICC 프로토콜의 표준화 전망을 기술한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4A
• /
• pp.390-398
• /
• 2004

This paper describes a study on the automatic generation system of the interface for communication among AMBA bus and IPs with different protocols. Employing an extended STG, the proposed system generates the interface modules required for the communication among IPs with different protocols. For an example system, the interface module for communication between AMBA AHB bus and a video decoder has been generated and verified in its functionality. The area and latency have been compared with the manually designed interface. For burst-mode communication, the generated interface module shows the comparable performance with the manually designed module. For single-mode communication, the generated interface module shows a slightly worse performance than the manually designed module. However, the increased area is negligible considering the size of the IP.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.2
• /
• pp.53-58
• /
• 2019

In this paper, we propose a new definition for the Private interface communication protocol structures order to improve the performance of LDAP-based Ud interface. Performance tests were separated by LDAP-based interface method and Private based interface method and analyzed the results of the performance test. As a result, it was confirmed the amount of processing of the received message and the response message to the result of the performance test that the Private based Ud interface method is 1.7 times(avg.) higher than the LDAP based Ud interface method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.7
• /
• pp.1346-1363
• /
• 1994

Packet voice protocols have been realized in many research works. But few studies for the interconnection of LAN and PABX to facilitate the voice communication have been done. In this paper, the gateway to interconnect the Ethernet LAN with the existing PABX telephone network for voice communication has been designed and implemented. The implemented gateway protocol is a modified protocol based on CCITT`s G.764 packetized voice protocol. To accomplish this goal the hardware system has been realized, which is divided into five parts: interface part with the telephone line, voice-processing part, PC interface part, controller part, and finally DTMF part. And the gateway software is divided into three parts: interface to make use of the packet driver which drives the network card, driver to drive the PABX gateway, and the protocol handling part.

• The KIPS Transactions:PartA
• /
• v.9A no.4
• /
• pp.479-484
• /
• 2002

This paper presents the model that integrates an SDL system and a CORBA system using mapping rules between method and signal for developing embedded systems connected with internet. In order to support communication between the two different systems (SDL and CORBA), it is essential to secure the conversion interface between SDL communication protocol and CORBA communication protocol. In this paper, IDL is adopted for the communication interface and the conversion of the communication protocol between the two systems, and the IDL compiler automatically generates the interface for protocol interoperability. The proposed model adopts middleware on the subpart of the SDL based legacy system, and hence, supports the service on the distributed system, regardless of the environment and location of the server system.