• Journal of Korea Foundry Society
• /
• v.41 no.4
• /
• pp.331-341
• /
• 2021

The effects of austempering temperature, austenitizing temperature and time, added copper content and prior heat-treatment on the processing window of 3.6wt%C-2.5wt%Si ductile cast iron during austempering. The maximum processing window was obtained at 350℃ of austempering temperature. The processing window was increased with increased austenitizing temperature from 850 to 900℃; however, it decreased at 950℃. The processing window was increased with increased austenitizing time from 0.5 to 2 hours and rather decreased for 4 hours. The optimum condition of austenitizing was obained at 900℃ for 2 hours. The processing window was increased with copper content added in the range of 0.0~0.8wt%. The processing window was increased by prior normalizing heat-treatment and decreased by prior annealing in comparison with that for the as-cast state,

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.340-342
• /
• 2015

윈도우 시스템은 90년대 이후로 지속적으로 사용되어진 개인용 컴퓨터의 운영체제로 그래픽 사용자 인터페이스와 멀티프로세싱 기능 등을 제공한다. 최근 배포되어지는 8.1 버전은 기존의 윈도우 시스템과 비교하여 다양한 특징을 가지고 있지만 윈도우 스토어는 네트워크를 이용하여 설치할 수 있는 다양한 응용 프로그램을 제공한다. 그러나 현재 윈도우 스토어에는 게임을 위한 응용 프로그램은 거의 제공되지 않고 있다. 이 논문에서는 사용자가 간편하게 설치하여 실행시킬 수 있는 미로탈출 앱을 설계한다. 제안한 앱은 저용량으로 윈도우 스토어에서 다운로드해서 사용자가 직관적으로 미로탈출 게임을 할 수 있도록 한다. 이를 위하여 HTML5와 자바스크립트를 이용하여 개발한다.

• Journal of Korea Foundry Society
• /
• v.22 no.2
• /
• pp.97-104
• /
• 2002

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06a
• /
• pp.450-453
• /
• 2011

고화질의 디지털 카메라 및 스마트폰, 감시용 카메라의 보급 등으로 인해 최근 패턴 인식 및 이미지 프로세싱 분야에서 고화질의 이미지 및 비디오를 처리해야 하는 경우가 많아지고 있다. 특히 차량 번호판 감지 등과 같은 객체 인식 분야의 경우, 고화질의 이미지로 인해 그만큼 인식에 필요한 계산 비용이 증가하게 되었는데 따라서 이러한 계산 비용을 효율적으로 줄이기 위한 기법이 요구되고 있다. 또한 기존의 차량 번호판 감지의 도메인과는 다르게 도로 상에서의 실시간 차량 번호판 감지의 필요성이 대두되고 있기에 본 논문에서는 도로 상에서의 실시간 번호판 감지 시스템을 위한 차량 번호판 주변정보 기반의 효율적인 윈도우 슬라이딩(window sliding) 방법을 제안한다. 본 논문의 시스템은 총 3단계로, (1) SVM(Supported Vector Machine) 을 통한 차량 번호판 주위 정보에 대한 학습, (2) 도로 상의 번호판 위치 확률 모델링을 통한 탐색 공간의 감소, (3) $context_{plate}$분류기를 통한 OCS(operator context scanning)의 수행이다. 이와 같은 $context_{plate}$분류기와 OCS를 통해 번호판 검출을 위한 윈도우 슬라이딩의 수가 크게 줄었음을 알 수 있었으며, 또한 번호판의 정보를 건너뛰지 않고, 신뢰성 있게 접근함을 알 수 있었다.

• Journal of Korea Foundry Society
• /
• v.29 no.2
• /
• pp.86-94
• /
• 2009

The effect of austenitizing temperature and time on the processing window of 3.60wt%C - 2.50wt%Si - 0.80wt%Cu ductile cast iron and that of the amount of copper added were investigated. The second stage reaction at 400oC was retarded with increased austenitizing temperature. The widest processing window was obtained at the lower austempering temperature with the increased time at the same austenitizing temperature. The width of the widest processing window was decreased with the increase of time at the same austenitizing temperature. The width of processing window was increased with the increased amount of copper added.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.9A
• /
• pp.905-915
• /
• 2007

This paper proposes a filter-based algorithm to adaptively adjust the contention window in IEEE 802.11 DCF. The proposed mechanism is focused on the general and realistic environments that have various conditions regarding to noise, media types and network load. For this flexible adaptation, Filter-based DCF(FDCF) takes a more realistic policy such as median filter concept in the image processing technologies. We can handle these various environments by adjusting the contention window size according to the result of filtering based on history-buffer. We can ignore temporarily and randomly occurred transmission failures due to noise errors and collisions in noisy environments. In addition, by changing the reference number and history-buffer size, FDCF can be extended as a general solution including previous proposed mechanism. We have confirmed that the proposed mechanism can achieve the better performance than those of previous researches in aspects of the throughput and the delay in the realistic environments.

• Journal of the Korea Computer Industry Society
• /
• v.6 no.5
• /
• pp.697-714
• /
• 2005

In this paper, we made a windows-based interactive presentation system using a laser pointer mouse. The system provides that a speaker controls the presentation interactively by means of a laser pointer. During the presentation, a display PC generates on its local display a bitmap corresponding to the presentation. This bitmap is then transmitted to the projector and the bitmap is then projected onto the screen. The display of the presentation is controlled by the monitoring of the laser spots that are also projected onto the screen. Laser spot control is achieved through a control system. When the processing section matches the successive laser spot positions with a pre-established spatial pattern, the corresponding display command is issued. The display command may be transmitted to the display computer which responds by an action like mouse function.

• Journal of Korea Foundry Society
• /
• v.32 no.6
• /
• pp.284-288
• /
• 2012

The effects of Si content on the variation of microstructure and processing window of austempered ductile cast iron were investigated. Four different Si contents between 2.42 and 3.37 wt.% were used. The influence of silicon on the microstructure and processing window of these materials were studied. Austenitizing was performed at $900^{\circ}C$ for 60min and austempering temperature were both $340^{\circ}C$ and $360^{\circ}C$ and austempering time were for 4min upto 119min and for 5min upto 160min respectively. After heat treatment, the evolution of stage I and stage II were performed by optical metallography, XRD, hardness test. The results showed that $t_2$ was delayed as Si contents was increased due to the fact that Si retarded the formation of cementite ($Fe_3C$). The high silicon content promoted the stability of the metastable two-phase combination of austenite and ausferrite.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.6
• /
• pp.1237-1242
• /
• 2017

Computer vision is coming more interesting with new imaging sensors' new capabilities which enable it to understand more its surrounding environment by imitating human vision system with artificial intelligence techniques. In this paper, we made experiments with Kinect camera, a new depth sensor for object detection and distance measurement functions, most essential functions in computer vision such as for unmanned or manned vehicles, robots, drones, etc. Therefore, Kinect camera is used here to estimate the position or the location of objects in its field of view and measure the distance from them to its depth sensor in an accuracy way by checking whether that the detected object is real object or not to reduce processing time ignoring pixels which are not part of real object. Tests showed promising results with such low-cost range sensor, Kinect camera which can be used for object detection and distance measurement which are fundamental functions in computer vision applications for further processing.

• Journal of Korea Foundry Society
• /
• v.30 no.2
• /
• pp.60-65
• /
• 2010

In this study, we investigate the effects of austempering heat treatment on the processing window and mechanical properties in cast and hot-rolled Fe-0.7 C-2.3 Si-0.3 Mn steel. Each specimens were austenitised at $900^{\circ}C$ for 7 min, and austempered at $260^{\circ}C,\;320^{\circ}C$, and $380^{\circ}C$ for the various periods of time from 2 min to 240 min. After heat treatment, the evaluation of stage I and stage II as performed by optical metallography, XRD, hardness test. Both cast and hot rolled specimens had similar processing window. So grain size effect is not important to the austempered high carbon high silicon cast steel. When the austempering temperature was $260^{\circ}C$, the microstructure consisted of the lower ausferrite while the upper ausferrite structure was formed at $380^{\circ}C$. As the austempering temperature increases from 260 to $380^{\circ}C$, the strength and hardness decreased, elongaton and volume fraction of austenite increased. In addition, there was no change of mechanical properties between cast and hot-rolled specimens.