• Electronics and Telecommunications Trends
• /
• v.11 no.1 s.39
• /
• pp.49-64
• /
• 1996

Computer-Aided Control Engineerig(CACE) 프레임워크는 컴퓨터 제어시스템의 개발비용과 신뢰성에 대한 위기에 대처하여, 제어시스템 엔지니어링 분야의 독립적인 소프트웨어 패키지들을 상호 호환성 있게 통합하여 컴퓨터 제어시스템의 모델링과 구현, 유지보수 및 소프트웨어 재사용에 이르는 라이프사이클 전단계에 걸쳐 일관적으로 사용될 수 있어야 한다. 이러한 개념의 개방형 통합 소프트웨어 패키지 운영체제가 광범위한 응용분야에서 재사용될 수 있도록 하기 위해서는 다음과 같은 5가지 서비스 클래스를 제공하는 프레임워크라는 기반구조에 의해 개발되어야 한다. 프레임워크에서 제공하려는 서비스들은 여러 응용분야의 소프트웨어 패키지들을 통합적으로 운영하기 위하여 필수적으로 요구되는 서비스 개념으로서 데이터베이스 서비스, 모델정의 서비스, 태스크 운영 서비스, 사용자 대화 서비스, 프로세스 통신을 위한 메시지 서비스들이 존재한다.

• The KIPS Transactions:PartD
• /
• v.16D no.5
• /
• pp.767-790
• /
• 2009

Setting up a priorityfor an embedded system is greatly significant because a release plan at the early stage of product developments can properly be established through right decision making procedures based on the priorities. For instance, both dependencies among requirements and the aspects of product developers should be considered into the priorities to improve the embedded system. Especially, trade-offs among the requirements, which are quite different depending on H/W and S/W architecture styles they use, should be acknowledged without exception. However, the selection process on the priority has hitherto been fairly systematic in the existing environment where hardware and software are not being considered at once. Therefore, this paper suggests an dependency and aspect-based model and process for the requirements of the priority. For this, the paper analyzes the trade-offs between the requirements depending on the disparate Architecture styles of H/W and S/W, and it also reflects the viewpoints of the developers. For thelast thing, the model and process suggested will be applied to the case of the development of both cell phones and cameras to gain authenticity and reliability. In conclusion, the danger occurring when the release plan is constructed can be minimized by screening the priorities that optimizes the embedded system more explicitly.

• Journal of Internet Computing and Services
• /
• v.24 no.1
• /
• pp.61-69
• /
• 2023

Recently, as the fishery resources are depleted, expectations for productivity improvement by 'rearing fishery' in land farms are greatly rising. In the case of land farms, unlike ocean environments, it is easy to control and manage environmental and breeding factors, and has the advantage of being able to adjust production according to the production plan. On the other hand, unlike in the natural environment, there is a disadvantage in that operation costs may significantly increase due to the artificial management for fish growth. Therefore, profit maximization can be pursued by efficiently operating the farm in accordance with the planned target shipment. In order to operate such an efficient farm and nurture fish, an accurate growth prediction model according to the target fish species is absolutely required. Most of the growth prediction models are mainly numerical results based on statistical analysis using farm data. In this paper, we present a growth prediction model from a stochastic point of view to overcome the difficulties in securing data and the difficulty in providing quantitative expected values for inaccuracies that existing growth prediction models from a statistical point of view may have. For a stochastic approach, modeling is performed by introducing a Gaussian process regression method based on water temperature, which is the most important factor in positive growth. From the corresponding results, it is expected that it will be able to provide reference values for more efficient farm operation by simultaneously providing the average value of the predicted growth value at a specific point in time and the confidence interval for that value.

• Journal of Internet Computing and Services
• /
• v.10 no.5
• /
• pp.195-209
• /
• 2009

The embedded software has been become more important than the hardware in mobile systems in ubiquitous society. The improvement models such as CMMI(Capability Maturity Model Integration) and SPICE(Software Process Improvement and Capability dEtermination) are used to improve the quality of software in general systems. Software process improvement is also necessary for mobile embedded software development to improve its quality. It is not easy to apply the general software improvement model to the mobile embedded software development due to the high cost effectiveness and heavy process. On the other hand, XP has the characteristics on focused communications with customers and iteration development. It is specially suitable for mobile embedded software development as depending on customer's frequent requirement changes and hardware attributes. In this paper, we propose a framework for development small process improvement based XP(eXtreme Programming)'s practice in order to accomplish CMMI level 2 or 3 in mobile embedded software development at the small organizations. We design and implement the Mobile Embedded Software Process Improvement System(MESPIS) to support process improvement. We also suggest the evaluation method for the mobile embedded software development process improvement framework with CMMI coverage check by comparing other process improvement model. In the future, we need to apply this proposed framework to real project for practical effectiveness and the real cases quantitative. It also include the enhance the functionality of MESPIS.

• Proceedings of the Korea Contents Association Conference
• /
• 2004.11a
• /
• pp.314-317
• /
• 2004

With the advance of network and software infrastructure, Grid-computing technology on a cluster of heterogeneous computing resources becomes pervasive. Grid computing is required a coordinated use of an assembly of distributed computers, which are linked by WAN. As the number of grid system components increases, the probability of failure in the grid computing is higher than that in a traditional parallel computing. To provide the robustness of grid applications, fault detection is critical and is essential elements in design and implementation. In this paper, a OGSA based process fault-detection services presented to provide high reliability under low network traffic environment.

• The Journal of the Convergence on Culture Technology
• /
• v.2 no.1
• /
• pp.87-91
• /
• 2016

This study is to develop a standard model in order to establish IOT production information system and to analyze the effect. Professional IT industry and SMEs that want to build a production information system can be applied to standard models to build the system more effectively. It provides ease of construction and reliability for IOT production information system with removing irrational elements, product quality and reducing production cost. In addition, it can be applied to standardize management of raw materials supply and demand aggregation processes of production and constructed a system more effectively using standard module.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.947-950
• /
• 2014

The recent APT attacks including cyber terror are caused by a high level of malicious codes and hacking techniques. This implies that essentially, advanced security management is required, from the perspective of 5A. The changes of IT environment are represented by Mobile, Cloud and BYOD. In this situation, the security model needs to be changed, too into the Airport model which emphasizes prevention, and connection, security and integration of functions from the existing Castle model. This study suggested an application method of the risk-based Airport model to the cyber security environment.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.5
• /
• pp.80-86
• /
• 2005

Induction motors are a critical component of many industrial processes and are frequently integrated in commercially available equipment. Safety, reliability, efficiency, and performance are some of the major concerns of induction motor applications. Fault tolerant control (FTC) strives to make the system stable and retain acceptable performance under the system faults. All present FTC method can be classified into two groups. The first group is based on fault detection and diagnostics (FDD). The second group is includes of FDD and includes methods such as integrity control, reliable stabilization and simultaneous stabilization. This paper presents the fundamental FDD-based FTC methods, which are capable of on-line detection and diagnose of the induction motors. Therefore, our group has developed the embedded distributed fault tolerant and fault diagnosis system for industrial motor. This paper presents its architecture. These mechanisms are based on two 32-bit DSPs and each TMS320F2407 DSP module processes the stator current, voltage, temperatures, vibration signal of the motor.

• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.6
• /
• pp.211-222
• /
• 2021

Recently, frozen and refrigerated appliances on the market are being released with additional IoT functions, but there are few tests on IoT functions. In particular, the existing test system does not have IoT test items for IoT-based frozen and refrigerated appliances, making it difficult for companies to find the cause even if defects occur, and test institutions are also restricted from selecting IoT-related test items and conducting correct performance tests. In this paper, we design a test item framework that can identify product defects and identify causes in the performance test process of frozen and refrigerated products with IoT functions among products in the home appliance field, and propose test methods and management measures using them. Through the proposed research, manufacturers and testing institutions can test the correct performance of IoT-based frozen and refrigerated products, thereby enhancing the completeness and securing reliability of the products.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.2
• /
• pp.129-143
• /
• 2019

As the importance of autonomous vehicle safety is emphasized, the application of ISO-26262, a development verification guideline for improving safety and reliability, and the safety verification of autonomous vehicles are becoming increasingly important, in particular, SAE standard level 3 or higher level autonomous vehicles detect and decision the surrounding environment instead of the human driver. Therefore, if there is and failure or malfunction in the autonomous driving function, safety may be seriously affected. So autonomous vehicles, it is essential to apply and verity the safety concept against failure and malfunctions. In this study, we study the fault injection scenarios for safety evaluation and verification of autonomous vehicles using ISO-26262 part3 process and STPA were studied and safety measures for safety concept design were studied through simulation bases fault injection test.