• The Journal of the Korea Contents Association
• /
• v.22 no.9
• /
• pp.592-601
• /
• 2022

This study was attempted to suggest future directions for nursing ethics education by analyzing research trends related to ethical conflicts among nurses and the current status of nursing ethics education. In four domestic databases, it was searched as a combination of words 'nurse', 'ethics', 'moral', 'bioethics', 'conflict', 'sensitivity', 'dilemma', 'issue', and 'value'. As a result, 591 papers were confirmed from 2000 to December 2021, of which 111 papers were finally analyzed. The status of nursing ethics education was analyzed for 184 out of 203 schools that operated a four-year bachelor's degree program registered with the Korean Accreditation Board of Nursing Education. As a result of the study, the number of studies related to ethical conflicts among nurses steadily increasing, and quantitative studies on nurses in general hospitals were the most common. The main keywords were identified as moral sensitivity, moral agony, ethical dilemma, and biomedical ethics awareness. Nursing ethics education was operated by 68% of universities as a major subject, and more than half of universities opened it in the first and second grades with one or two credits. As a result of this study, ethical conflicts experienced by nurses are increasing according to social change. Therefore, it is necessary for universities to further expand the proportion of nursing ethics education and to establish an educational model for each grade level for the continuity of the educational effect.

• Journal of the Korean Society of Radiology
• /
• v.16 no.6
• /
• pp.687-695
• /
• 2022

To find a 3D printer material that can replace lead used as a shield for high-energy electron beam treatment, the shielding composites were simulated by using MCNP6 programs. The Percent Depth Dose (PDD), Flatness, and Symmetry of linear accelerators emitting high-energy electron beams were measured, and the linear accelerator was compared with MCNP6 after simulation, confirming that the source term between the actual measurement and simulation was consistent. By simulating the lead shield, the appropriate thickness of the lead shield capable of shielding 95% or more of the absorbed dose was selected. Based on the absorption dose data for lead shield with a thickness of 3 mm, the shielding performance was analyzed by simulating 1, 5, 10, and 15 mm thicknesses of ABS+W (10%), ABS+Bi (10%), and PLA+Fe (10%). Each prototype was manufactured with a 3D printer, measured and analyzed under the same conditions as in the simulation, and found that when ABS+W (10%) material was formed to have a thickness of at least 10mm, it had a shielding performance that could replace lead with a thickness of 3mm. The surface morphology and atomic composition of the ABS+W (10%) material were evaluated using a scanning electron microscope (SEM) and an energy dispersive X-ray spectrometer (EDS). From these results, it was confirmed that replacing the commercialized lead shield with ABS+W (10%) material not only produces a shielding effect such as lead, but also can be customized to patients using a 3D printer, which can be very useful for high-energy electron beam treatment.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.8
• /
• pp.287-294
• /
• 2020

The purpose of this study was, base on the observation that the leg movement has effect on muscles around trunk, to provide clinical fundamental data to develop effective abdominal draw-in technique by investigating the effect of abdominal draw-in exercise accompanying leg movement on the thickness of transversus abdominis muscle and trunk control ability in patients with stroke. The subjects were assigned randomly to experimental group I (n=9) on which the abdominal draw-in technique is applied and experimental group II (n=9) on which the abdominal draw-in technique accompanying leg movement is applied. The thickness of transversus abdominis muscle in the affected side and the trunk control ability were measured before and after treatment using ultrasonography and trunk impairment scale. A session of 30 minutes per day were performed four days a week for four weeks and the measured outcomes were analyzed. The in-group comparison showed significant difference both thickness of transversus abdominis muscle during abdominal draw-in technique application (p<0.01) and trunk control ability (p<0.001) between before and after treatment. The significant difference between two groups were observed only in trunk control ability (p<0.05). It was concluded that the abdominal draw-in technique accompanying leg movement is an intervention that has positive effect not only on transversus abdominis muscle but also on tunk control ability by inducing more efficient contraction reaction in muscles around trunk through autonomic pelvic movement caused by leg movement.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.8
• /
• pp.363-377
• /
• 2021

The present study investigated the effects of dynamic tubing gait training(I and II) on the postural alignment, gait, and quality of life in chronic patients with Parkinson's disease. This study is based on the case study that recruited a total of 3 patients with chronic Parkinson's disease (Hoehn and Yahr Stage of 1 to 3 each one person). Dynamic tubing gait training (I and II) applied to chronic patients with Parkinson's disease for 25 sessions, 30 minutes a day, 5 days a week, over 5 weeks period. To investigate the effects of this study, evaluating using the postural alignment test, muscle activity tests, gait analysis, and quality of life scale for patient with Parkinson's disease. After the intervention of Dynamic tubing gait training (I and II), Trunk flexion was decreased. Also, during walking from initial contact (IC) to mid stance (Mst), muscle activity of Quadriceps, Hamstring, and Tibialis Anterior (TA) was increased and muscle activity of Gastrocnemius was decreased. The muscle activation of Erector Spinae (ES T12, L3) was increased in the H&Y I and III stages and decreased in the H&Y II stage. Length of gait line, single support line, ant/post position and lateral symmetry of center of pressure (COP) parameters improved. The spatio-temporal gait parameters including of step length, stride length, and velocity was increased, and cadence decreased. Further the quality of life of patients with Parkinson's disease was improved. Based on these findings, Dynamic tubing gait training (I and II) could be applied as a new approach to improve posture, gait, quality of life in chronic patients with Parkinson's disease for more than 5 years, whose drug resistance is halved.

• Journal of the Korean Society for information Management
• /
• v.39 no.4
• /
• pp.23-48
• /
• 2022

The purpose of this study is to investigate the flow of domestic information literacy education research using keyword network analysis and topic modeling and to explore the direction of information literacy education in the future. For this reason, 306 academic papers related to information literacy education published in academic journals of the library and information science field in Korea were chosen. And through the preprocessing process for abstracts of the paper, total keyword appearance frequency, keyword appearance frequency by period, and keyword simultaneous occurrence frequency were analyzed. Subsequently, keyword network analysis analyzed the degree centrality, between centrality, and eigenvector centrality of keywords. Using structural topic modeling analysis, 15 topics -curriculum, information literacy effect, contents of information literacy education, school library education, information media literacy, information literacy ability evaluation index, library anxiety, public library program, health information literacy ability, digital divide, library assisted instruction improvement, research trend, information literacy model, and teacher role-were derived. In addition, the trend of topics by year was analyzed to confirm the change in relative weight by topic. Based on these results, the direction of information literacy education and the suggestions for follow-up research were presented.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.1
• /
• pp.697-702
• /
• 2023

Recently, with the introduction of drones, a core technology of the 4th industrial revolution, various convergence education using drones is being conducted in school education sites. In particular, drone theory and practice education is being conducted in connection with free semester classes and career exploration. The drone convergence education program has higher learner satisfaction than simple demonstration and practice education, and the learning effect is high due to direct practical experience. However, since practical education is being conducted for a large number of learners, it is impossible to restrict and control the flight of a large number of drones in a limited place. In this paper, we propose a monitoring system that allows the instructor to monitor multiple drones in real time and learners to recognize collisions between drones in advance when multiple drones are operated, focusing on education operated in schools. The communication module used in the experiment was equipped with GPS in Murata LoRa, and the server and client were configured to enable monitoring based on the location data received in real time. The performance of the proposed system was evaluated in an open space, and it was confirmed that the communication signal was good up to a distance of about 120m. In other words, it was confirmed that 25 educational drones can be controlled within a range of 240m and the instructor can monitor them.

• The Journal of the Korea Contents Association
• /
• v.22 no.8
• /
• pp.467-481
• /
• 2022

What are the implications for us through the discussion on the effect of Germany's dual system of vocational education on the youth unemployment rate? You can find out what kind of evaluation Germany is receiving on the dual system vocational education system implemented based on the 'Vocational Education and Training Act' (Berufsbildungsgesetz), and the specific system establishment form for the industry-academic-government cooperation system. It was possible to present the crises and problems of these systems. Responsibility for the dual system of vocational education in Germany rests with the national and state ministries of education, and private enterprises and chambers of commerce are responsible for business practices. Practical work in a company is conducted through skill-oriented education, and in vocational schools, competency-oriented theoretical education is received. In addition, the necessity and demand for digital vocational and education training in accordance with German Idustrie 4.0 and higher vocational education degree acquisition through dual-degree courses were identified. It can be seen that the youth unemployment rate is the lowest in Europe due to the successful development and utilization of human resources to improve the competitiveness of companies, such as dual vocational education and training (VET) at all levels, higher vocational education at universities, and continuing vocational education programs. Vocational education in Korea will also be able to improve the unemployment rate by establishing a system that allows schools and businesses to conduct vocational education and training simultaneously. In particular, it was possible to judge the necessity of 'close consultation between labor, management, and government', which we consider the most important and should lead to in-depth discussion and cooperation for dual education between vocational schools and companies.

• Korean journal of food and cookery science
• /
• v.18 no.6
• /
• pp.704-715
• /
• 2002

This study intended to compare dietary and snack habits of primary students in the schools providing and non-providing lunch to clarify the correlation between those conditions and the occurrence of dental caries. Furthermore, this study also focused on evaluating educational effects by providing children with nutritional education program. 1. As a result of dietary habit analysis, it was found that children from the school providing lunch were better in terms of breakfast regularity, eating speed. optimum amount of intake, and meal time regularity than those from the school non-providing lunch. In particular, it was noted that children from the school providing lunch took a little more meat, fish, seaweed and milk or dairy products than those from school non-providing lunch. Thus, it could be assumed hat children provided with lunch have more reasonable dietary habit than those without lunch program. In general, it was found that there was a slight positive change in children's dietary habit after nutritional instruction than before, suggesting that the nutritional education had effects on improving their dietary habit. 2. It was found that primary students often took snacks causing dental caries such as caramel, chocolate, sweets and biscuits, and children from the school providing lunch were more willing to reduce those snacks upon recognizing the causes of dental caries than those from the school non-providing lunch. For the children who chewed gum with physical cleansing effects, it was shown that the highest frequency wat twice or three times a week. Moreover, the ratio of children who took snacks following dinner which might affect their dental caries and the ratio of children who selected snacks because of TV commercial were both reduced after nutritional education. Also the consumption of detergent foods like vegetable, fruit, protein. seaweed. milk or dietary products after nutritional education was increased. 3. It was found that children from the school providing lunch took more often all food groups except for food group IV affecting dental caries than those from the school non-providing lunch. The average number of consuming foods which cause dental caries was 5.04 times per person a day, and most of those were rather taken by liquid than solid food. The average eating times of rinsing foods which kill the bacteria on the surface of teeth and prevent from dental caries, was 9.33 for a person a day, which was a little higher than recommended time. Exposed time for dental caries for a person a day was 100.9 min, of which liquid dental caries was 56.2 min and solid dental caries was 44.6 min, suggesting that liquid food had a high potential to cause dental caries.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.3
• /
• pp.178-188
• /
• 2017

Purpose: We compared the effects of newly developed diode laser (Bison 808 nm Diode laser) on the treatment of peri-implantitis with conventional products (Picasso 810 nm Diode laser) by comparing the surface temperature of titanium disc and bacterial sterilization according to laser power. Materials and Methods: The titanium disc was irradiated for 60 seconds and 1 - 2.5 W using diode laser 808 nm and 810 nm. The surface temperature of the titanium disc was measured using a temperature measurement module and a temperature measurement program. In addition, in order to investigate the sterilizing effect according to the laser power, 808 nm laser was irradiated after application of bacteria to sandblasted large-grit acid-etched (SLA) and resorbable blast media (RBM) coated titanium discs. The irradiated disks were examined with scanning electron microscopy. Results: Both 808 nm and 810 nm lasers increased disk surface temperature as the power increased. When the 810 nm was irradiated under all conditions, the initial temperature rise rate, the descending rate, and the temperature change before and after was higher than that of 808 nm. Disk surface changes were not observed on both lasers at all conditions. Bacteria were irradiated with 808 nm, and the bactericidal effect was increased as the power increased. Conclusion: When applying these diode lasers to the treatment of peri-implantitis, 808 nm which have a bactericidal effect with less temperature fluctuation in the same power conditions would be considered safer. However, in order to apply a laser treatment in the dental clinical field, various safety and reliability should be secured.

• The korean journal of orthodontics
• /
• v.33 no.4 s.99
• /
• pp.235-245
• /
• 2003

The goal of the present study was to evaluate the effects of PNAM appliance and cheiloplasty on alveolar molding. Samples consisted of 16 unilateral cleft lip and palate infants (10 males and 6 female, mean age=37.0 days after birth, average alveolar cleft gap=10.46m), who were treated with PNAM appliances by one orthodontist and rotation- advancement cheiloplasty by one surgeon in Seoul National University Hospital. Average duration of alveolar molding treatment was 13.10 weeks and these patients were recalled at average 8.31 weeks after cheiloplasty. These patients' models were obtained at initial visit (T0, mean age : $37.0\pm27.89$ days after birth), after successful alveolar molding (T1, mean age : $119.25\pm40.18$ days after birth), and after cheilopasty (T2, mean age : $190.81\pm42.78$ days after birth). Seven linear and five angular variables were measured using 1 : 1 photometry and soft ware program(V-ceph. Cybermed. Seoul, Korea). Paired t-test was performed to investigate statistical significance at p<0.05 level. 1 The posterior parts of alveolar segments were the stable structures during alveolar molding treatment period and after cheiloplasty in infants. 2. The closure of cleft gap during alveolar molding was usually due to backward bending of the whole part of the greater segment. 3. Although forward growth of the greater segment was hindered by alveolar molding, it resumed after cheiloplasty. 4. Increase of anterior inter-segment angle after cheiloplasty was due to the molding effect of the lip scar pressure.