• The Journal of the Acoustical Society of Korea
• /
• v.15 no.5
• /
• pp.99-106
• /
• 1996

The noise of a compressor is a major contributor to overall noise radiated from the refrigerator. The major source of the noise is radiated by the vibration of the compressor shell. In this study, to identify the dynamic characteristics of compressor shell, a compressor shell is divided into several components and these are analyzed with a commercial FEM(Finite Element Method) package such as MSC/NASTRAN. Using substructure synthesis method, the dynamic characteristics of the total system is identified. The coherence of each component to the total system is computed by using strain and kinetic energy. To increase the frequency of the first resonance mode which is most effective mode to the noise of the compressor shell, the improving strategy of dynamic characteristics is suggested by changing mass and stiffness of the coherence component to the first mode.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.3
• /
• pp.230-235
• /
• 2004

This paper describes FPGA implementation of a pointer interpreter which can support a synchronization of SDH(or SONET)-based transmission network. The pointer interpreter consists of a pointer-word extractor and a pointer-word interpreter The pointer-word extractor which is composed of mod-6480 counter, shift register and pointer synchronizing block, finds out the H1 and H2 pointer word from a 51.84 Mb/s AU-3/STS-1 data frame and then performs the synchronizing with a 6.48 Mb/s by dividing them in 8. Based on the extracted pointer word, pointer-word interpreter analyzes pointer states such LOP, AIS and NORM according to pointer state-transition algorithm. It consists of a majority vote, a pointer word valid/invalid check, a pointer justification, and a pointer state check. The simulation results of Xilinx Virtex XCV200PQ240 FPGA chip shows the exact pointer word extraction and correct decision of pointer status based on extracted pointer word. The proposed pointer interpreter is suitable for pointer interpretation of 155 Mb/s STM-1/STS-3 frame.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11a
• /
• pp.508-510
• /
• 2005

동영상 압축 표준인 H.264/AVC는 압축 효율을 높이기 위해 기존의 표준과는 다른 기법들을 사용함으로 압축률은 높였지만 보다 많은 계산량을 요구한다. 제한된 자원을 가진 임베디드 환경에서는 많은 계산량은 큰 문제점이 된다. DMB를 포함한 대부분의 경우는 이를 하드웨어적으로 구현을 하고 있지만 구현비용과 업데이트의 용의를 위해서 앞으로는 소프트웨어적으로도 구현이 가능해야 할 것이다. 본 논문에서는 H.264/AVC가 임베디드 환경에서 소프트웨어로 구현을 할 경우 그에 대한 성능 명가를 수행하기 위해 실제 임베디드 장비에서 H.264/AVC 복호기와 임베디드 그래픽 라이브러리를 사용해서 재생기를 구현하였고 다양한 종류의 영상을 재생시키는 실험을 하였다. 이러한 실험을 통해 임베디드 상에서 H.264/AVC 재생기는 QCIF 화면을 초당 3프레임 정도를 재생시키는 능력을 보였다. 이는 사용자측면에서는 동영상이라고 느낄 수 없을 정도의 성능이었다. 그러므로 임베디드 환경에서 H.264로 압축된 영상을 사용할 경우에는 H.264의 프로파일이나 레벨 조정 및 프레임 넘김 기법이 필요 할 것으로 추정한다.

• The KIPS Transactions:PartD
• /
• v.11D no.1
• /
• pp.95-104
• /
• 2004

This paper proposes an efficient remote video evaluation system that is matched well with personalized characteristics of students using information filtering based on user profile. For making a question in forms of video, a key frame extraction method based on coordinate, size and color information is proposed. And Question-mating intervals are extracted using gray-level histogram difference and time window. Also, question-making method that combined category-based system with keyword-based system is used for efficient evaluation. Therefore, students can enhance their study achievement through both supplementing their inferior area and preserving their interest area.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7B
• /
• pp.583-594
• /
• 2006

WPANs (Wireless personal area networks) have developed as various forms according to requirements such as data rate, coverage, subscriber volume, and supported mobile velocity. And mobile device with multiple network interfaces is very common. To make these multi-mode devices communicate with any WPAN device at anytime, anywhere, the framework for heterogeneous wireless networks is essential. Therefore, we propose the integration framework to converge heterogeneous WPANs. In this paper, we explain the requirements and detailed design of our framework, and then present the emulation test results.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.55-60
• /
• 2016

In the traditional wireless LAN model, scan procedure to search a new AP starts when the predefined number of Rx failure of beacon frames are occurred. In this case, lots of data packet loss occur during MN's handover because loss of the relatively longer data packet starts before the small-sized beacon loss. Newly developed scanning mechanism in this paper has the beacon counter that increases when the Rx power level of beacon frame is less than the threshold and the previous rx power level. New scan procedure starts when the counter exceeds the predefined number. Beacon Rx power threshold is verified and performance of the new WLAN model is evaluated under UDP and TCP traffic environment.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.9
• /
• pp.621-628
• /
• 2013

This paper presents a framework for context-aware smart phone applications based on Android. The mobile context-aware system is composed of a low level context collection module, a high level context generation module and a service provision module. Existing android system cannot provide an appropriate application framework to integrate these independent modules. In this paper, we provide an application framework which make each module a component, and provide appropriate services to each component. This framework hides the Android platform, so that the complexity for organical combination can be minimized and the application developers can make the mobile context-aware applications easily.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.1
• /
• pp.1-5
• /
• 2007

In this paper, we propose an unmanned patient monitoring system design and performance of a motion capture and sound detection. Unmanned patient monitoring system can be used in the greek koma and meaning deep sleep patient to need 24 hour surveillance. To monitoring, we used laptop, CCTV camera (or PC camera), A/D converter, microphone and detection program. The detection program based on the frame difference method and sound level meter. It had several functions such as data collecting and storing. All of this system was tested in several the simulations of emergency situations. It can be expected that an unmanned patient monitoring system can be used in emergency situation and patient care.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.10
• /
• pp.17-22
• /
• 2004

We developed a new ANGLED display driving method which used both amplitude and pulse width modulation. For pulse width modulation, we divided a picture frame time into S sub-frames. For amplitude modulation, we used three OLED luminance(or current) levels which were controlled by TFT's gate voltages. By combining these two modulation methods, we obtained 35(=243) grey levels. And we designed a new data electrode driving circuit block with two shift registers without using DAC's. To verify the feasibility, we simulated the key circuit components by HSpice with TFT parameters extracted from current-voltage characteristics of 6${\mu}{\textrm}{m}$ channel length polysilicon TFT's. From the simulation results, we found that 320${\times}$240, dual scan, 243 grey level AMOLED display can be designed with this method.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.11a
• /
• pp.110-113
• /
• 2015

SHVC(Scalable High efficiency Video Coding)는 다양한 멀티미디어 서비스 환경에서 높은 코딩 효율을 위해 공간적, 시간적, 화질적 스케일러빌리티를 이용한 표준 기술이다. SHVC는 멀티-계층 부/복호화를 수행하기 때문에 싱글-계층인 HEVC(High Efficiency Video Coding) 보다 추가적인 복잡도를 요구한다. 본 논문에서는 SHVC 복호화기의 복잡도를 분석하고 SHVC 복호화기에서 높은 복잡도를 차지하는 프레임 기반 업샘플링을 PU 기반 On-the-fly 업샘플링(On-the-fly Up-sampling) 방법과 SIMD 연산을 통해 고속화 한다. 제안하는 알고리즘이 적용된 SHVC 복호화기는 기존 SHVC 복호화기의 복호화 시간보다 평균 1.23배 고속화 성능을 보이며 업샘플링의 복잡도가 24.7%에서 1.9%로 감소하였다. On-the-fly 업샘플링 과정은 기존 프레임 레벨 업샘플링 과정 대비 평균 90.3% 수행시간 감소율을 보인다.