• Environmental engineer
• /
• s.14
• /
• pp.19-21
• /
• 1987

• Radioisotope journal
• /
• v.1 no.1
• /
• pp.25-28
• /
• 1986

• Korean Journal of Metals and Materials
• /
• v.49 no.1
• /
• pp.9-16
• /
• 2011

To develop a 6061 aluminum alloy with low residual stress and high tensile strength, a cryogenic treatment process was investigated. Compared to the conventional heat treatment process for precipitation hardening with artificial aging, the cryogenic treatment process has two additional steps. The first step is cryogenic quenching of the sample into liquid nitrogen, the second step is up-hill quenching of the sample into boiling water. The residual stress for the sample was measured by the $sin^2{\psi}$ method with X-ray diffraction. The 6061 aluminum alloy sample showed 67% relief in stress at the cryogenic treatment process with artificial aging at $175^{\circ}C$. From this study, it was found that the optimum cryogenic treatment process for a sample with low residual stress and high tensile strength is relatively low cooling speed in the cryogenic quenching step and a very high heating speed in the up-hill quenching step.

• Journal of Practical Engineering Education
• /
• v.12 no.1
• /
• pp.203-212
• /
• 2020

This study surveyed 244 employees out of a total of 356 graduates from the steel industry in 2015 to February 2019. The employment rate of graduates is POSCO 67.7%, Hyundai Steel 23.8%, POSCO families 13.1%, and Hyundai Steel families 8.5%. The national certificates acquired by each section were surveyed, with 53.1% of metal section, 39.8% of mechanical section, and 7.1% of other section. Preferred national certificates were POSCO, machinery maintenance industry technicians, steelmaking technicians, and Hyundai Steel followed steelmaking technicians, mechanical maintenance industrial technicians. Among other certifications, the national certificate of industrial safety industrial engineer was preferred. In addition, the average number of national certificates per person for major employment is 5.06 for POSCO, 5.35 for POSCO families, 5.29 for Hyundai Steel, and 4.73 for Hyundai Steel families. The average number of national certificates for S-OIL, KEPCO, Poongsan Metal, etc., is 2.51. In conclusion, it was found that the national certificates related to majors are used as the main evaluation data in finding suitable majors and competency for the job when recruiting talents.

• Archives of design research
• /
• v.17 no.4
• /
• pp.241-250
• /
• 2004

In this research, the copper alloy plates C2200, C5210, C7701, C8113 were selected to make datum and to identify further usage of metal craft experimentation. For its experimentation, the general welding and TIG welding methods were researched; for 2nd experimentation, the Reticulation and Electroforming skill's differences in color and temperature were researched. With these methods 3 different kinds of works are introduced for sample studies. For this research, Dr. Lee, Dong-Woo who works in Poongsan Metal Co, supported 4 kinds of copper alloy metals. Which are Commercial bronze (Cu-Zn), Deoxidiged Copper(Cu-Sn-P), Nickel Silver (Cu-Ni-Zn), and White Bronze (Cu-Ni); they were applied partly and wholly by the method of Laminatin, Reticulation, Fusing, and Electroforming skills. In case of C2200, the brass, the A. C. TIG welding method is better under 2mm slight plate; the D.C. TIG welding is better upper 2mm plate; and 250~300$^{\circ}C$ is recommended for remain heat treatment. In case of C5210, not having Hydrogen in high temperature return period, doesn't need Oxygen in high temperature and hardening in comparative high temperature neither, it is good for welding. It contains Sn 2-9% ad P 0.03-0.4% generally; and in accordance with the growth rate of Sn contain amount, the harden temperature boundary become broad. In case of cold moment after welding, they are recommended that higher speed TIG welding, smaller melting site and less than 200$^{\circ}C$ for pre-heating temperature. In case of C7701, the 10-20% Ni, 15-30% Zn are widely used.. If it is upper 30% Zn, it become (${\alpha}+{\beta}$) system and adhesive power rate become lower, and the productivity become lower in low temperature but the productivity become higher in high temperature. Nickel Silver's resistance of electricity is well; and the heatproof and incorrodibility is good, too. Lastly, in case of C8113, good at persistence in salty and grind; high in strength of high temperature. In case of white brass, contain 10-30% Nickel and hardened in high temperature and become single phrase. For these reason, the crystallization particles easily become large, if the resistance become higher small amount of Pb, P, S separation rate become higher.