• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.111-112
• /
• 2010

21C 정보화 사회를 맞이하여 디지털 부하의 사용이 급격히 증가하고 있다. 뿐만 아니라 친환경 녹색성장의 일환으로 풍력, 연료전지, 태양광과 같은 신재생 에너지원을 이용한 발전 시스템도 증가 하고 있다. 이에 따라 교류에 비하여 신뢰도가 높고, 저손실의 전원 시스템을 구축할 수 있는 직류급전시스템의 필요성이 부각되고 있다. 직류급전시스템에 있어 효율성, 신뢰성, 전송능력 등이 고려되어야 하지만 직류 배전의 상용화를 위해서는 직류 전용 보호차단기 등을 개발하여 보급하여야 한다. 미국의 통계에 따르면 아크사고는 전기화재의 큰 요인으로 꼽히고 있다. 이미 교류 아크의 검출 알고리즘이 다방면으로 연구되어 아크차단기(AFCI)가 개발되었으며 미국의 경우 AFCI 사용을 법제화 하고 있다. 따라서 직류급전시스템에서의 아크 검출을 위해 직류 아크의 특성을 분석한다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.4
• /
• pp.527-532
• /
• 2015

In domestic island regions, the power supply generally depends on diesel generators due to difficulties of grid connection. To solve this issue, recently, the study on the stand-alone microgrid technology and its test are being actively conducted. In this paper, we propose the stand-alone microgrid integration monitoring system for energy independence island. First, we design the software architecture for monitoring of solar, wind, diesel power generation facilities, transmission and distribution of grid network, and energy storage system. Then, we implement the monitoring software that allows administrators to identify and run the monitoring software easily.

• Journal of Navigation and Port Research
• /
• v.37 no.1
• /
• pp.79-84
• /
• 2013

For the diversity of energy supply system and the improvement in the habitants' living environments of the islands, it is possible and necessary to use the natural energy as resources of the electric power generation system. In this study, the characteristics of wind and solar radiation on 4 islands offshore Namhae-Tongyoung of Korea were measured for one year from November 2010 to October 2011 and analyzed in relation to energy resources survey. As a result of measurement and analysis, the respective wind rose diagrams of 4 islands were made, and showed that the frequencies of wind directions were quite different from among the islands. The Rayleigh probability distribution of wind velocity showed that the wind speeds of KR and SS were mainly 2~5m/s, and the respective quantities of electric power generation of 4 islands were shown to be different. The variation of solar radiations and potential quantity of those uses were measured to be similar to each other among 4 islands.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.5
• /
• pp.69-75
• /
• 2011

The purpose of this study was to develop a buckling analysis technique for a windpower system structure under environmental loadings (hydrostatic pressure) using FEM. We analyzed an isotropic material and composite material and made a comparison using buckling pressure formulas. First, finite element analyses for an isotropic material (SC410) were performed to obtain the variation of buckling pressure for the number of elements and boundary conditions in a pressure-shell model, and the numerical results were compared with those of existing empirical formulas. Then, additional finite element analyses based on the results of the isotropic material (SC410) were performed to determine the optimum lamination angle and pattern for a composite material (URN300). The results of the FE analyses for the composite material were also compared with those of existing empirical formulas. The ply orientations (lamination angles) used in the FE analyses were $0^{\circ}$, $15^{\circ}$, $30^{\circ}$, $45^{\circ}$, $60^{\circ}$, $75^{\circ}$, and. The lamination patterns in the FE analyses were and. The lamination pattern was assumed to be the equivalent model of. The results of the FE analyses for the isotropic material (SC410) indicated that the optimal values for the number of elements and the boundary conditions were 6000 and both simply supported, respectively. The results of the FE analyses for the composite material (URN300) showed that the optimal ply orientation was $60^{\circ}{\sim}75^{\circ}$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.1
• /
• pp.12-20
• /
• 2006

Recently, new dispersed sources (DSG) such as Photovoltaic, Wind Power, fuel cell etc. are interconnected with distribution systems as national projects for alternative energy preparing for oil crisis. This paper deals with the optimal evaluation algorithms in the case where new dispersed sources are operated in distribution systems. It is very difficult and complicated to handle the interconnection issues for proper voltage managements, because professional skills and enormous amounts of data for the evaluations are required. The typical evaluation algorithms mainly depending on individual ability and quality of data acquired, inevitably cause the different results f3r the same issue, so unfair and subjective evaluations are unavoidable. In order to overcome these problems, this paper proposes reasonable and general algorithms based on the standard model system and proper criterion, which offers the fair and objective evaluations in any case.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.3
• /
• pp.116-125
• /
• 2011

This study examined vertical shafts in high-rise apartments of the old high-rise buildings, reviewed the possibility of using flue ducts, and analyzed airflow patterns according to pressure differences between in and out side of flue ducts through computational fluid dynamics(CFD). The resulting conclusions are as follows: 1) The analysis results of airflow according to the stack effect of flue ducts show that smaller-diameter flue ducts(${\phi}1.2m$) would be morefavorable in increasing downward wind velocity than bigger-diameter ones(${\phi}1.6m$) and that the introduction ducts for outside air should be more than 50% of flue duct diameter to obtain a downward wind velocity higher than $3.0^m/s$ that is the minimum blade wind velocity of a small domestic wind generator. 2) The optimal installation location of a bypass introduction duct is the neutral plane of a flue duct or lower. When the diameter of the upper duct is bigger than that of the lower duct, it will generate more effects on the increase of downward wind velocity in flue ducts.

• Journal of the Korean Solar Energy Society
• /
• v.23 no.2
• /
• pp.21-34
• /
• 2003

This study aims to present the applicability of wind turbine generator system to urban buildings for the utilization of clean renewable energy. The results are as follows; According to the wind resource analysis, it has been found that small sized wind power system can be viable for buildings application due to the amplification of wind velocity around buildings or building clusters, in spite of low mean velocity of 2-3m/s in Seoul and Kyunggi urban areas. But planners must perform micrositing analysis around building so that wind turbine can be located at high velocity zones. The system must be designed to avoid obstacles preventing prevailing wind in buildings. It should be recognized that wind speeds are changing depending on the height and length from buildings. The wind power system can be used as a symbol of landmark which shows a sustainable architecture from the scenary Itself A case study for apartment building in urban showed that wind power systems can be applicable in two kinds of place, rooftops and ground levels. Especially, the wind power systems must be carefully positioned so that wind resources do not decrease when it is installed at ground levels. and according to life cycle cost analysis, adaption of new small win4 power systems to buildings were proved to produce a profit if it is considered the expense of environment improvement and the wind speed increasing according to rise of building height. This research will ultimately achieve green architecture that preserves nature and at the same time provides pleasant environment to humans, and will play a great role in establishing the environment-preserving sustainable architecture of the 21th century.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.9
• /
• pp.958-963
• /
• 2012

Characteristics of off-grid hybrid renewable energy sources for high mountain villages are discussed. Considering reliability of electric power generation, Photovoltaic (PV)-wind hybrid and PV-hydro hybrid system are suggested. Connecting two or more villages with these hybrid systems, an extended hybrid off-grid can be formed. Sustainability of entire system is important in design of off-grid system, and income generation of the village people using the electricity should be considered.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.405-407
• /
• 2011

해양플랜트는 일반적으로 Offshore라고 일컫는 심해 자원을 생산하기 위한 산업 분야를 비롯하여, 해상 풍력 및 조류와 파랑을 이용한 에너지 자원 개발과 관련된 발전 설비 등 해상에 설치되는 모든 사회 기반 시설을 포함한다. 이러한 해양플랜트는 점차 고도화된 기술을 사용하여 미개척 해양 지대로 진출하게 되는데, 육상과 고립되어 해양 환경에 노출되어 있는 만큼 안정적인 시스템을 요구한다. 이는 곧 해양플랜트 설비 자체와 운영 인력들의 안전과도 직결되기 때문이다. 따라서 심해 및 정밀 위치 유지를 위한 DP(Dynamic Positioning) 시스템은 해양플랜트에 반드시 탑재되어야 하며, 운영 환경에 따라 차별화된 DP 시스템이 탑재되어야 한다. 또한 해양플랜트 핵심장비는 국가적인 차원에서 개발이 추진되어야 하며, DP 운영 인력도 체계적으로 양성할 수 있는 메커니즘을 구축해야한다.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.483-486
• /
• 2005

국내에서 대체에너지 공급 비율을 보면 청정에너지로 분류할 수 있는 태양열에너지, 태양광 에너지, 풍력에너지를 모두 합하여 대체에너지의 10% 이하이며, 대체에너지 비율의 90% 이상을 폐기물로부터 얻은 에너지가 차지하고 있는 실정이다. 신재생에너지원에는 여러 종류가 있지만 해양에너지원에 대해 대상을 설정하고 이에 대한 부존량을 살펴보면 진도 주변의 해역에서 조류발전 부존량이 약 362만 kW가 되며, 시화호와 새만금 등지에서의 조력발전 부존량이 650만 kW, 동해안 후포 연안을 비롯한 파력발전 부존량이 20만 kW가 되는 것으로 알려져 있다. 이에 따라 해양에너지를 실용화하기 위한 연구가 국내외에서 연구되고 있다. 본 논문은 권선형유도발전기를 갖는 조류발전 시스템을 대상으로 연구한 결과로 권선형유도발전기를 제어하기 위한 전력변환장치 개발과 관련한 내용이다. 신재생에너지원이 발전 단가 측면에서 경제성을 갖기 위해서 발전기 용량은 5MW 급까지 대용량화 되어 있는 단계이지만 국내에서는 아직 MW급 이상이 되는 권선형유도발전기와 권선형유도발전기를 제어하는 전력변환장치에 대한 연구 실적이 없는 상황이다. 이에 본 논문에서는 IMW급의 권선형유도발전기에 대한 개발 사례를 소개하면서 유효전력제어, 역률제어 특성과 운전 속도에 따라 변동되는 회전자 측에서의 피상전력 제어 특성에 대해 고찰하고자 한다.