• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.4
• /
• pp.661-668
• /
• 2024

Based on the topology of the direct-drive permanent magnet synchronous wind power grid-connected system based on the power electronics full-power converter, the wind turbine model and the grid-side inverter model were studied, and the machine-side rectifier control based on current and speed double closed loops was designed. strategy, as well as a grid-side inverter control strategy based on current and voltage double closed loops, implementing a two-level back-to-back double closed-loop full control strategy. A system simulation model was built using Matlab/Simulink, and the operation of the unit was simulated when the wind speed changed step by step. The grid-connected current with the same phase and good sinusoidal nature of the grid voltage was output. The grid-connected system ran stably and efficiently. The simulation results The validity and rationality of the model, as well as the correctness and feasibility of the control strategy were verified.

• Journal of Aerospace System Engineering
• /
• v.11 no.4
• /
• pp.30-35
• /
• 2017

In this work, a manufacturing and structural test of 1kW class horizontal axis wind turbine blade using natural-fiber composite was performed. The aerodynamic design of blade was performed after investigation on design requirement. The structural design load was investigated after aerodynamic design of blade. And also, structural design of blade was carried out. The structural design of blade was carried out using the simplified methods such as the netting rule and the rule of mixture applied to composite. The structural safety of the designed blade structure is investigated through the various load cases, stress, deformation and buckling analyses using the FEM method. Finally, the blade manufacturing and structural test using natural composite was carried out.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1355-1357
• /
• 2002

한국형 풍력발전기의 감시제어 시스템은 순시적인 발전 상황과 풍향, 풍속 등을 모니터링하는 기능뿐만 아니라, 인버터 시스템과 전력 변환 지령값을 전달하고, 인버터의 현재 상태를 감시하고 최적의 피치각라을 유지시켜주는 피치제어 시스템 등으로 구성되어 있다. 이러한 감시제어 시스템은 풍력발전기의 효율을 증가시킬뿐만 아니라 각종 예측이 불가능한 사고를 예방하는데 있어서 필수적이라 할 수 있다.

• Journal of the KSME
• /
• v.34 no.5
• /
• pp.342-350
• /
• 1994

본 연구를 통하여 기존에 사용되고 있던 알루미늄 압출재 블레이드를 복합재료로 대치하여 개 발함으로써 이의 타당성을 검토하여 보았다. 풍력발전기의 개발 추세는 점차 메가와트 (megawatt)급 시스템으로 진행되어 터빈 블레이드가 대형화됨에 따른 터빈브레이드의 경량화 및 내구력의 향상이 절실히 요구된다. 이는 복합소재의 사용으로 경량화를 통한 시스템 각요소의 제작비용절감 및 내구력 향상을 통한 시스템의 수명증대의 효과를 확보할 수 있을 것이다. 그 러나 복합재료를 사용한 터빈 블레이드는 기존의 알루미늄을 이용한 재료보다는 가격경쟁에서 다소 떨어지며 제작공정상의 어려움과 정밀한 설계기술의 미개발 등 아직도 많은 난점을 안고 있는 실정이다. 그러나 현재 풍력에너지 이용 선직국의 개발추이로 보아 대용량시스템의 터빈 블레이드는 복합소재의 사용이 필수적이며 보다 효율적인 양산시스템의 구축과 최적설계에 대한 연구가 지속적으로 실시되면 기존의 블레이드와는 충분한 경쟁성을 확보할 것으로 전망된다.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.6
• /
• pp.125-131
• /
• 2011

Recently, the application of renewable energy to building is steadily increasing in domestic due to the energy saving efforts around the world. Among the all, wind energy is one of the rising energy source because of its high technological maturity. Domestic wind power market has rapidly increased in recent years but the certification system for wind turbine has not been activated since it was introduced in 2009. Thus, this study aims to propose the improvement of certification system for wind turbine by comparing domestic certification system with international certification system. The result of this study are as follows. First, domestic certification system needs to be subdivided and established by systematic standards. Second, it is considered that education about rating standards is required to wind turbine makers to activate domestic certification system. Third, domestic certification agenciesand test agencies need to be unified and reduced.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.40-41
• /
• 2011

알려진 바와 같이 전 세계는 에너지 고갈 및 고유가 그리고 $CO_2$ 감축 등 여러 가지 에너지 문제에 직면 해 있다. 따라서 이러한 문제를 해결하기 위해 새로운 대체 에너지에 대한 연구를 활발히 진행하고 있으며, 그중 태양광, 풍력, 조력 및 지열을 이용한 발전이 대부분의 대체 에너지 시장을 차지하고 있다. 태양광 및 풍력 발전을 비롯한 대체 에너지 발전의 경우 전력변환기가 필수적이다. 이미 고정된 효율을 가지는 발전 시스템에서 최대의 효율로 발전된 전력을 변환하기 위해 전력변환기의 효율 증대에 관한 연구가 활발히 진행되고 있다. 본 연구에서는 태양광 발전용 전력변환기에서 효율을 증대시키기 위해 스위칭 방식에 있어서 혼합 변조를 이용하였으며 이를 시뮬레이션을 통해 타당성을 검증하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.3
• /
• pp.266-273
• /
• 2003

A wind turbine simulator is developed for the emulation of variable input torque from the wind energy without actual rotor blades using motor-generator set. The torque command of dc motor is calculated from the characteristic equation of rotor blade during the change of wind speed. Especially the proposed control algorithm takes into account the fact that the moment of inertia of blade is much larger than that of driving motor. If you select the desired value of inertia, the stored/restored energy of the inertia during acceleration/deceleration can be compensated effectively resulting the only net torque is delivered to the generator. The simulator set-up has been designed and implemented using a do motor and drive. Feasibility of the proposed algorithm is verified by computer simulations and experiments.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.6
• /
• pp.806-815
• /
• 2010

Gear trains are combined with the planetary gear units and helical gear units. It is known that the combination type is decisive to the system performances of the transmissions. In this paper, within the commonly used range of the design requirements for medium and large scaled (1~8 MW) wind turbines, the transmission characteristics of the typical layouts of the gear train are investigated. According to the international standard by ANSI/AGMA/AWEA 6006-A03, the gear boxes are basically designed and compared with respect to the system lifes of 99% reliability, total weight, the power densities, overall diameter/length and the maximum stresses of the gear teeth. With these comparison works, the characteristics of the layouts of gear trains are discussed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.5
• /
• pp.53-59
• /
• 2007

Now, the study is activity that the energy market depending on a fossil fuel tend to change different way. In middle of the study compositive use of renewable energy(fuel cell and wind power, solar cell, etc.) is dispersion power system which concern is increasing. But in the case of generation of electric wind power system is changeable to be turbulence and wind and win speed are changeable in several seconds, so making the best of wind energy the MPPT that role in this case is important. In this paper suggest a MPPT which is making a use of information of wind speed and turning speed, windmill, electric power but it is simpler than former way. We could verify that a proposed controller working at the highest point of electric power when wind speed is regular speed and changable speed through the simulation.

• Journal of IKEEE
• /
• v.19 no.2
• /
• pp.225-231
• /
• 2015

The parameter K which decides how much to convert wind energy to electric energy in MPPT(maximum power point tracking) control of wind turbine system using torque controller is changed because blade shape and air density change. If the parameter K is not optimal value, power lose occur. The changed parameter K is important issue in wind turbine system. In this paper, to solve this problem, considering wind turbine system using back-to-back converter control and torque control, we propose the adaptive MPPT algorithm which performs fast control by using initial K, estimates mechanical power using Kalman filter method, uses the estimated mechanical power as input for MPPT algorithm again, and consequently performs optimal MPPT control.