• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2019.06a
• /
• pp.123-124
• /
• 2019

본 논문에서는 다중 깊이 및 RGB 카메라의 캘리브레이션 최적화 알고리즘을 제안한다. 컴퓨터 비전 분야에서 카메라의 자세 및 위치를 추정하는 것은 꼭 필요한 과정 중 하나이다. 기존의 방법들은 핀홀 카메라 모델을 이용하여 카메라 파라미터를 계산하기 때문에 오차가 존재한다. 따라서 이 문제점을 개선하기 위해 깊이 카메라에서 얻은 물체의 실제 거리와 함수 최적화 방식을 이용하여 카메라 외부 파라미터의 최적화를 진행한다. 이 알고리즘을 이용하여 카메라 간의 정합을 진행하면 보다 더 좋은 품질의 3D 모델을 얻을 수 있다.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2020.11a
• /
• pp.167-167
• /
• 2020

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.5
• /
• pp.420-425
• /
• 1994

Soybean seeds deteriorate even before harvest, especially under high temperature and high relative humidity conditions. This study was conducted to determine the effect of harvest date on seed quality in early maturing soybean cultivars. Soybean cultivars used in the experiment were Damyang-native, having small seed with yellow color, and Yuhsuzumi, having large seed with green color. The length of physiological maturity to grain harvest was 24 days in Yuhsuzumi and 8 days in Damyang-native. The moisture contents of seed were 25.3 % in Yuhsuzumi and 14.5 % in Damyang-native cultivar when pod reached its mature pod color. The seed color of Yuhsuzumi started to turn yellow, and its germination rate was greatly decreased when harvest was delayed after maturity, However, Damyang-native cultivars produced seed of high quality regardless of delayed harvest.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.33 no.1
• /
• pp.1-9
• /
• 2010

Quality design methodologies have received constituent attention from a number of researchers and practitioners for more than twenty years. Specially, the quality design for drug products must be carefully considered because of the hazards involved in the pharmaceutical industry. Conventional pharmaceutical formulation design problems with mixture experiments have been typically studied under the assumption of an unconstrained experimental region with a single quality characteristic. However, real-world pharmaceutical industrial situations have many physical limitations. We are often faced with multiple quality characteristics with constrained experimental regions. ln order to address these issues, the main objective of this paper is to propose a robust desirability function (RDF) model using a desirability function (DF) and mean square error (MSE) to simultaneously consider a number of multiple quality characteristics. This paper then present L-pseudocomponents and U-pseudocomponents to handle physical constraints. Finally, a numerical example shows that the proposed RDF can efficiently be applied to a pharmaceutical process design.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.3
• /
• pp.185-192
• /
• 2019

Early-maturing rice type is cultivated to produce rice before the Korean Thanksgiving Day. We investigated the flowering and ripening characteristics of major breeding lines in early maturing rice type. In Jeonju, field growth days (FGD) from transplanting to heading changed about 3.3 days by 10 days of transplanting days and about 2.5 days by the change of mean temperature during growth period. As the temperature during ripening stage, 1000 brown rice weight was changed 0.2 g, the rice quality of brown and milled rice was changed 5% and 6.5%, respectively. Baegilmi and Kittake showed early heading habit suitable for harvesting before Korean Thanksgiving. Joun and Pecos showed good ripening characteristics under high temperature during the ripening stage. We expect that these characteristics might be useful for breeding new rice cultivars for harvesting before Korean Thanksgiving.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6977-6984
• /
• 2015

It is faced with the necessity of multi roll forming process of the ball slide rail which is made by adding the separate manufacturing processes, piercing, bending, trimming, to the roll forming process of a continuous plastic deformation, to improve the quality. However, the vibration and noise of the press machine in this process leads to the quality degradation of slide rail manufactured in this process. In this study, the roll was designed considering the optimal strain rates by the roll forming program with finite element method. And to estimate the static stability of the multi process the Von-Mises stress and deformation on the press was calculated with a structural analysis program. Also, to avoid driving systems in the resonance region their natural frequencies in the 1st and 2nd mode were calculated through the modal analysis. To verify its dynamic stability improvement the magnitudes of noise and vibration in the existing and studied system were compared using a microphone and accelerometers. And the widths and surface roughnesses of the rails which had been produced in the existing and studied process were measured. Therefore, it is known that multi roll forming process is stable in the analytical and experimental study.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.1
• /
• pp.33-37
• /
• 2000

The 1-3 piezoelectric composite transducer with 75 volume percents PZT was fabricated by the dicing-filling method. The resonance modes of the 1-3 transducer have been studied with electric impedance measurement as a function of frequency. The fundamental frequencies of the planar and thickness mode were observed at 0.95MHz and 1.63MHz respectively, but the lateral mode was not observed. In the thickness mode, the electromechanical coupling coefficient of the 1-3 piezoelectric composite transducer, 0.54, was very closed to that of the single phase PZT(0.52). The pulse-echo response by exciting the 1-3 transducer with an electric pulse was observed from the water/reflector interface, and analyzed bandwidth by the spectrum of the impulse response. The quality factor Q for the 1-3 transducer was observed as 1.5 smaller than that of the single phase(80) and then the 1-3 transducer may be used to the broad band type transducer applications.

• Korean Journal of Veterinary Research
• /
• v.40 no.3
• /
• pp.611-625
• /
• 2000

For the improvement of quality control of laboratory mouse, we investigated the environmental condition, histopathological findings and serological test using ELISA to mouse hepatitis virus(MHV), Mycoplasma pulmonis(MP), Clostridium piliforme(TZ) and Sendai virus (HVJ) of ICR, C57BL/6, CBA and C3H/He mice that were supplied from conventional laboratory animal facility. 1. The ammonia concentration of facility was below the recommended concentration, 15ppm, by the KNIH, and the room temperature($21{\sim}23^{\circ}C$) and relative humidity(40~60%) was optimum range recommend by the Ministry of Health and Welfare, respectively. 2. The incidence rate of inapparent disease was 86.6% and the major findings in the liver were vacuolar degeneration with nucleic pleomorphism. The lung was shown the thickening of alveolar wall and interstitial pneumonia with congestion. The kidney and spleen were observed the mild congestion and extramedullary hematopoiesis, respectively. 3. The positive reaction rates against MHV and MP in serological test was 97.9% and 37.5%, respectively but HVJ and TZ were negative. These results suggest that laboratory mice could be infected with MHV and MP under conventional environments. Therefore we recommend to select thoroughly inapparent infected mice and to convert conventional system into SPF facility as soon as possible.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.1
• /
• pp.1-10
• /
• 2011

An optimization method is proposed for preform and billet shape designs in the forging process by using the Equivalent Static Loads (ESLs). The preform shape is an important factor in the forging process because the quality of the final forging is significantly influenced by it. The ESLSO is used to determine the shape of the preform. In the ESLSO, nonlinear dynamic loads are transformed to the ESLs and linear response optimization is performed using the ESLs. The design is updated in linear response optimization and nonlinear analysis is performed with the updated design. The examples in this paper show that optimization using the ESLs is useful and the design results are satisfactory. Consequently, the optimal preform and billet shapes which produce the desired final shape have been obtained. Nonlinear analysis and linear response optimization of the forging process are performed using the commercial software LS-DYNA and NASTRAN, respectively.

• Journal of Broadcast Engineering
• /
• v.25 no.3
• /
• pp.439-448
• /
• 2020

In this paper, we propose a modified optimization algorithm for point cloud matching of multi-view RGB-D cameras. In general, in the computer vision field, it is very important to accurately estimate the position of the camera. The 3D model generation methods proposed in the previous research require a large number of cameras or expensive 3D cameras. Also, the methods of obtaining the external parameters of the camera through the 2D image have a large error. In this paper, we propose a matching technique for generating a 3D point cloud and mesh model that can provide omnidirectional free viewpoint using 8 low-cost RGB-D cameras. We propose a method that uses a depth map-based function optimization method with RGB images and obtains coordinate transformation parameters that can generate a high-quality 3D model without obtaining initial parameters.