• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.1 no.2
• /
• pp.238-245
• /
• 1991

This study was analysis of ${\alpha}$-quartz in the 37 worker's lung died of coal workers' pneumoconiosis(CWP) and in the 9 normal's lung by Fourier transform infrared spectrophotometer. The results were as follows : 1. The dried lung weight percents in wet lung weight were 24.4%, 25.4%, coal workers' pneumoconiosis and normal lungs, respectively. Ash weight percents in dried lung weight were 7.7%, 5.0%, coal workers' pneumoconiosis and normal lungs, respectively. 2. The presision (as of coefficient of variation) for the ${\alpha}$-quartz determination were 2.6% in standard quartz (ranged from 9.9 to $198.0{\mu}g$) and 3.7% in ashed lung samples. 3. The characterstic ${\alpha}$-quartz absorption spectra in lungs of CWP were only shawn by LTA ashing. 4. Geometric mean of ${\alpha}$-quartz concentration in CWP lung was 173mg/100g dried lung. 5. The concentrations of ${\alpha}$-quartz in Korean CWP lungs were similar to those of foreign coal miner's lungs.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.6
• /
• pp.88-95
• /
• 2020

Currently, Fiber-Reinforced Plastic (FRP) composite materials are used in many industrial fields, owing to their superior stiffness and specific strength compared to metals. However, there are issues with FRP inefficiency, due to low productivity of such materials, environmental problems they pose and long curing times needed. Trying to address these issues, research was conducted towards the development of a FRP composite material with excellent properties and short production time, introducing a curing method using a UV lamp. Four types of composite materials were prepared, cured with catalyst or UV (CZ: Catalyst + ZNT 6345, CR: Catalyst + RF 1001 MV, UVZ: Photoinitiator + ZNT 6345, and UVR: Photoinitiator + RF 1001 MV). Examination of the chemical and mechanical properties of these composites showed that UV-cured materials performed better than the catalyst-cured ones. These results indicate that the production process of FRP composite materials can be simplified by using a UV lamp for curing, resulting in composite materials with the same quality, but reduced production time by about 70% compared to currently used practices. This advancement will contribute greatly to the composite material industry.

• Polymer(Korea)
• /
• v.26 no.2
• /
• pp.209-217
• /
• 2002

We studied the mechanism of orientation of polyimide molecules which were irradiated by polarized UU (PUV) using polarized Fourier transform infrared (FT-IR) spectroscopy and ultraviolet (UV) spectroscopy, According to the measured UV spectra, we found PI films mainly absorb UV light less than 350 nm wavelength, therefore, UV light less than 360 nm induces photochemical reaction of PI. PUV irradiation of PI films caused decrease of all peak intensities in the FT-IR spectra. except the newly formed broad peak at $3244 cm^{-1}$, due to degradation of the PI molecules. The remaining PI molecules after photo-degradation showed predominantly perpendicular molecular orientation to the irradiated PUV polarization direction, due to the preferential degradation of PI molecules parallel to irradiated PUV polarization direction. However the rubbing of PI films induced reorientation of the PI molecules parallel to the rubbing direction. We also investigated the alignment of the liquid crystal by rubbing or PUV irradiation. Liquid crystals align perpendicular to the PUV polarization direction and parallel to the rubbing direction.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.1
• /
• pp.61-69
• /
• 2009

Statement of problem: Porcelain veneers have become a popular treatment modality for aesthetic anterior prosthesis. Fitting porcelain veneers in the mouth usually involve a try-in appointment, which frequently results in salivary contamination of fitting surfaces. Purpose: An in vitro study was carried out to investigate the effect of silane treatment timing and saliva contamination on the resin bond strength to porcelain veneer surface. Material and methods: Cylindrical test specimens (n=360) and rectangular test specimens (n=5) were prepared for shear bond test and contact angle analysis. Whole cylindrical specimens divided into 20 groups, each of which received a different surface treatment and/or storage condition. The composite resin cement stubs were light-polymerized onto porcelain adherends. The shear bond strengths of cemented stubs were measured after dry storage and thermocycling (3,000 cycles) between 5 and $55^{\circ}C$. The silane and their reactions were chemically monitored by using Fourier Transform Infrared Spectroscopy analysis (FTIR) and contact angle analysis. One-way analysis of variance (ANOVA) and Dunnett's multiple comparison were used to analyze the data. Results: FT-IR analysis showed that salivary contamination and silane treatment timing did not affect the surface interactions of silane. Observed water contact angles were lower on the saliva contaminated porcelain surface and the addition of 37% phosphoric acid for 20 seconds on saliva contaminated porcelain increased the degree of contact angle. Silane applied to the porcelain, a few days before cementation, resulted in increasing the bond strength after thermocycling. Conclusion: Within the limitation of this study, it can be concluded that it would be better to protect porcelain prosthesis before saliva contamination with silane treatment and to clean the contaminated surface by use of phosphoric acid.

• Journal of the Korean Institute of Gas
• /
• v.26 no.2
• /
• pp.1-8
• /
• 2022

The purpose of this study is to prepare GPTMS((3-Glycidoxypropyl) trimethoxysilane)-SiO₂ nanofluid and analyze the effect of nanofluid injection on carbonate reservoirs. Structural analysis of silica nanoparticles modified by GPTMS was investigated by FTIR(Fourier transform infrared spectroscopy). C-H stretching vibrations at 2,950 cm^-1 indicating the silica surface modification with GPTMS were observed when the silane feed was over 0.5 mmol/g. Also, the coreflooding test by nanofluid injection on the aged limestone and dolomite plug samples was carried out with different particle concentration and flow rate. The incremental oil recovery was up to 18.9%, and contact angle and permeability of carbonate samples were changed by the effect of nanoparticle adsorption on pore which caused wettability alteration and pore size change. Therefore, the prepared nanofluid will be utilized as an injection fluid for enhancing oil recovery and modifying fluid flow properties such as change of rock wettability and permeability in carbonate reservoirs.

• Membrane Journal
• /
• v.28 no.2
• /
• pp.121-128
• /
• 2018

Terpolymers, which are chemical compounds composed of three different chemical compounds, have rarely been utilized for gas separation membranes. In this study, we demonstrate a simple process to fabricate a composite membrane for $CO_2/N_2$ separation based on a terpolymer synthesized from poly(2-[3-(2H-benzotriazol-2-yl)-4-hydroxyphenyl] ethylmethacrylate)(PBEM), poly(oxyethylene methacrylate)(POEM), and methyl methacrylate (MMA) via free radical polymerization. A solution of the as-synthesized PBEM-PMMA-POEM was coated onto a microporous polysulfone (PSf) support to form a composite membrane. The successful polymerization and the characteristics and morphology of the membrane were characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) analysis, thermogravimetric analysis (TGA), and field emission scanning electron microscopy (FE-SEM). The gas permeance and $CO_2/N_2$ selectivity of the PBEM-PMMA-POEM terpolymer membrane were measured at $25^{\circ}C$. A maximum $CO_2/N_2$ selectivity of 30.2 was obtained at a $CO_2$ permeance of 57.4 GPU ($1GPU=10^{-6}cm^3$(STP)/($s\;cm^2\;cmHg$)).

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.5
• /
• pp.465-471
• /
• 2017

In this study, oxidized graphene nanoplatelet(GO) was prepared by oxidizing graphene nanoplatelet(GNP) with nitric acid in order to solve the problem of dispersion of GNP, one of nano materials. The surface chemical composition of the prepared GO was analyzed by fourier transform infrared spectroscopy(FT-IR) before incorporation into the epoxy paint, and the dispersibility in the solvent was confirmed. Meanwhile, GNP/Epoxy and GO/Epoxy paint were prepared by mixing GNP, GO with 0.1, 0.3, 0.5 and 1.0wt.% in epoxy paint and the mechanical properties were evaluated. As a result, GNP/Epoxy and GO/Epoxy paints showed better mechanical properties than Neat Epoxy which did not incorporate GNP, GO. Especially, when 0.3wt.% of GO was incorporated into epoxy resin, it showed higher tensile strength than Neat Epoxy. It was confirmed that acid treatment of GNP was effective in improving the mechanical properties of epoxy paint.

• Journal of Mushroom
• /
• v.19 no.3
• /
• pp.140-149
• /
• 2021

Mushroom-derived polysaccharides, which are the primary bioactive constituents, are beneficial for human health. Polysaccharides have immuno-modulation, antitumor, and antioxidant properties. Additionally, they have antiviral properties and protect against chronic radiation stress. In this study, high yield water-soluble polysaccharides were obtained from Pleurotus djamor var. roseus basidiocarps. The crude polysaccharide (CP) was extracted sequentially by hot water and ethanol precipitation. The yield of the brown CPs was 5.6% dw. Diethylaminoethyl cellulose and Sepharose-6B column chromatography of CPs generated several fractions. Total glucan content was determined in all the fractions. The F1 fraction displayed the highest sugar content and was considered as a purified polysaccharide (PP). The total glucan and β-glucan content in the four fractions ranged between 76.85-2.95% and 75.08-1.46%, respectively. The yield of the PPs was 300 mg, and it was obtained as a white powder. The PPs were characterized by Fourier-transform infrared spectroscopy (FTIR) and thin-layer chromatography. The FTIR spectral details confirmed the presence of a xylopentose polysaccharide. The antioxidant activity of the PPs was evaluated using in vitro 1,1-diphenyl-2-picryl-hydrazyl (DPPH) free radical scavenging assay and superoxide radical scavenging assay. The PPs showed strong DPPH free radical and superoxide anion radical scavenging activities in a dose-dependent manner. Purified PPs free of phenolics, protein, and carbohydrates were mainly responsible for the radical scavenging activity. The data suggest the potential of PPs as natural antioxidants.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.6
• /
• pp.219-224
• /
• 2022

CaF₂ single crystal has a large band gap (12 eV), and it is used for optical windows, prisms, and lenses due to its excellent transmittance in a wide wavelength range and low refractive index. Moreover, it is expected to be one of the materials for ultraviolet transmissive laser optical components. CaF₂ belongs to the fluoride compounds and has a face-centered cubic (FCC) structure with three sub-lattices. The representative method for CaF₂ single crystal growth is Czochralski, which method has the advantages of high production efficiency and the ability to make large crystals. In this study, X-ray diffraction (XRD), X-ray rocking curves (XRC) measurement, and chemical etching were performed to analyze the crystallinity and defect density of the CaF₂ single crystals, grown by the Czochralski method. Fourier-transform infrared spectroscopy (FT-IR) and UV-VIS-NIR spectroscopy systems were used to investigate the optical properties of the CaF₂ crystal. The provability of various applications, including UV application, was systematically investigated with various analysis results.