• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2003.04a
• /
• pp.59-59
• /
• 2003

경사기능 재료는 위치에 따른 특성 변화를 갖고 있어 변화하는 주변 환경에서 사용되는 재료의 응용성을 높일 수 있는 장점이 있다. 적합한 경사기능 재료의 제조를 위해서는 탄성률, 강도, 인성 등의 위치에 따른 변화를 예측하는 것이 필요하다. 그러나 재료 내에서의 탄성률 변화 등으로 인해 경사기능 재료에서 인성을 정량적으로 표현하는데는 어려움이 있으므로 이를 정량적으로 측정하고, R-curve를 결정하는 것은 재료의 응용성에 중요한 인자가 된다. 본 연구에서는 폴리우레탄 스폰지를 이용하여 밀도의 분포가 연속적으로 다른 폴리 우레탄 스폰지를 제조하고 이에 알루미나 분말 슬러리를 이용하여 slip casting을 행하였다. 그 후 폴리 우레탄 스폰지를 탈지한 후 알루미나 성형체를 소결하여 연속적인 기공률 분포가 다른 다공성 알루미나를 제조하였으며, 이에 Al을 용침하여 $Al_2O_3-Al$ 경사기능 재료를 제조하였다. 이러한 $Al_2O_3-Al$ 경사기능 재료에 대해 파괴인성 및 R-curve 특성을 CT(conpact tension)시편으로 측정하였으며, 이를 균일한 복합체의 파괴인성과 비교하였다. 또한 잔류 응력 특성을 파악하기 위해 실험적이 응력 데이터를 Moire interferometry를 이용하여 결정하였다. 또한 이를 유한요서 해석법(FEM)에 의한 계산치와 비교하였다. 서로 다른 조성 분포를 갖는 $Al_2O_3-Al$ 경사기능 재료와 균일한 복합체의 파괴인성을 비교한 결과 동일한 Al조성에서도 서로 다른 파괴 인성치가 나타났다. $Al_2O_3-Al$ 경사기능 재료에서 파괴인성에 영향을 줄 수 있는 인자로는 술수한 $Al_2O_3$의 파괴인성에 Al금속의 소성변형에 의한 인성증진 효과, 그리고 경사기능 재료에서 상호 조성차이에 따른 잔류응력을 고려할 수 있을 것이다. 이중 $Al_2O_3-Al$ 경사기능 재료의 파괴인성에 미치는 잔류응력의 영향을 고려하기 위해 이의 잔류응력에 대해 실험에 의한 유추된 잔류응력과 FEM계산에 의해 유추된 잔류 응력을 비교, 분석하였다.

• Journal of Convergence for Information Technology
• /
• v.7 no.2
• /
• pp.37-42
• /
• 2017

In order to estimate chaff RCS, we suggest here a novel method using the probability distribution. Normally, a chaff is assumed that it is a thin dipole antenna and the RCS can be calculated by the scattering wave theory. Most of the theoretical methods presented were mainly focusing on a single chaff cloud. In this paper, the RCS calculation was done for two or more chaff clouds and the changes of RCS with azimuth angle were observed. Matlab was used for presenting the probability distribution of chaff clouds and RCS calculation. A more accurate RCS estimation method is suggested by estimating the number of chaffs except the blocked elements.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.1
• /
• pp.247-252
• /
• 2019

The diffraction properties of optical signals by multi-layered periodic structures is formulated in two-dimensional space by using Fourier expansions associated with basic grating profile. The fields in each layer are then expressed in terms of characteristic modes, and the complete solution is found rigorously by using a modal transmission-line theory(MTLT) to address the pertinent boundary-value problems. Such an approach can treat periodic arbitrary gratings containing arbitrarily shaped dielectric components, which may generally have optical properties along directions that are parallel or perpendicular to the multi-layers. This paper illustrates the present approach by comparing our numerical results with data reported in the past for simple periodic circular 2D structures. In addition, this proposed theory can apply easily for more complex configurations, which include multiple periodic regions with several possible canonic shapes and high dielectric constants.

• Korean Journal of Microbiology
• /
• v.37 no.1
• /
• pp.28-36
• /
• 2001

These studies were carried out to understand the mechanisms of genes which are related in cell cycle progression at G1/S phase. Mutants involved in cell cycle progression and regulation in Saccharomyces cerevisiae were isolated and characterized. To isolate new mutants, we screened the sensitivity to ciclopirox olamine (CPO) which inhibits the cell cycle traverse at or very near the G1/S phase boundary in HeLa cell and budding yeast. As results, we isolated 30 mutants and named cos(ciclopirox olamine sensitivity: cos27∼cos57) mutants. To determine the phenotype of mutants, we examined the sensitivity to methyl-methane sulfonate (MMS) and hydroxyurea (HU). Several mutants were sensitive to MMS and HU. According to these Phenotypes, cos mutants were grouped into four. Group I mutants are cos27, cos28, cos32, cos33, cos36, cos37, cos40, cos42, cos46, cos50, cos52 and cos53 which show MMS, HU sensitivities and might act at a checkpoint pathway during S phase. Group II mutants are cos43 and cos48 which show MMS sensitivities and might act at a checkpoint pathway during Gl or G2 phase. Group III mutants are cos35, cos47, cos54, cos55 and cos56 which show HU sensitivities and might act at a progress pathway during S phase. Finally, Group IV mutants are cos29, cos30, cos31, cos34, cos38, cos39, cos41, cos44, cos45, cos49, cos51 and cos57 which show only CPO sensitivities. Moreover, we examined the terminal phenotype of mutants under fluorescent microscope and then found one of S phase checkpoint related mutant(cos37). Furthermore, we constructed the heterozygote strain between mutant and wild type haploid strains to study their genetic analysis of cos mutants.

• Korean Journal of Biological Psychiatry
• /
• v.9 no.1
• /
• pp.25-33
• /
• 2002

Serotonin transporter(5-HTT) is one of the major action site of antidepressants in neuronal cells. According to the recent studies, it is known that the functional polymorphism in the promoter region of the 5-HTT gene(5-HTT linked polymorphism repetitive element in promoter region, 5-HTTLPR) is associated with antidepressant responsiveness, and the distributions of 5-HTTLPR is various among the different populations. Our preliminary study suggested that it is possible to measure the endophenotype of 5-HTTLPR genotype by examining the pharmacodynamic research of the 5-HTT in platelet membranes. However, there are limitations to predicting the antidepressant responsiveness only from the endophenotypic characteristics of 5-HTT gene promoter polymorphism, and therefore we propose to use the pharmacogenomic methods for overcoming these limitations. We found that the significant correlations existed among the genetic polymorphisms of biogenic amine transporters whose structure and characteristics are similar to the 5-HTT, and the predictable odds ratio of antidepressant responsiveness are increased significantly by combining the effect with other associated polymorphisms, compared to the effect of 5-HTT promoter polymorphism only. These results support the hypothesis that antidepressant treatment has to be individualized according to the genetic and ethnic background of depressed patients. It would be possible to develope the evaluation tools to predict the antidepressant responsiveness and its side effect profile, if scientists reveal the genes related to the action mechanism as well as the metabolism of antidepressants so as to discover the interaction of those genes and contribution of endogenotypes toward antidepressant responsiveness.

• Korean Journal of Breeding Science
• /
• v.42 no.4
• /
• pp.413-418
• /
• 2010

A total of 424 plants was regenerated from the seed-culture of a rice cultivar, 'Ilpum'. The regenerated plants were grown in a greenhouse. The 297 plants with high fertility were selected among 424 plants. The harvested seeds from each plant were planted to each line at experiment field in 2008 and 2009. The each line was evaluated for the agronomic and morphological traits, also. The 64 lines (21.5%) showed significant differences in agronomic and morphological traits from donor cultivar 'Ilpum' among 297 lines. The heading date different from donor cultivar 'Ilpum' showed highest frequency in 297 lines, and accounts for 9.1% (29 lines). The phenotype of opaque endosperm and rolling leaf account for 1.7% and 1.3% in 297 lines, respectively. The genetic segregation was observed in dwarf/semi-dwarf, rolling leaf and opaque endosperm at $S_1$ generation, but not in $S_2$ generation. These results suggest that the mutant derived from a tissue-culture will be one of the promising genetic resources, due to its wide variation and high frequency of mutation, comparatively.

• Journal of Broadcast Engineering
• /
• v.16 no.2
• /
• pp.350-359
• /
• 2011

Fast developments of broadcasting technologies since 1990s enabled not only High Definition Television service providing high quality audiovisual contents at home but also mobile broadcasting service providing audiovisual contents to high speed moving vehicle. Terrestrial Digital Multimedia Broadcasting (T-DMB) is one of the technologies developed for mobile broadcasting service, which has been successfully commercialized. One of the major technical breakthroughs achieved by T-DMB in addition to robust vehicular reception is an adoption of framework based on MPEG-4 System. It naturally enables integrated interactive data services by using Binary Format for Scene (BIFS) technology for scene description and representation of graphics object and Object Descriptor Framework representing multimedia service components as objects. T-DMB interactive data service has two fundamental limitations. Firstly, graphic data for interactive service should be always overlaid on top of a video not to be rendered out of it. Secondly, data for interactive service is only received by broadcasting channel. These limitations were considered as general in broadcasting systems. However, they are being considered as hard limitations for personalized data services using location information and user characteristics which are becoming widely used for data services of smart devices in these days. In this paper, the architecture of T-DMB hybrid data service is proposed which is utilizing broadcasting network, wireless internet and local storage for delivering BIFS data to overcome these limitations. This paper also presents hybrid BIFS technology to implement T-DMB hybrid data service while maintaining backward compatibility with legacy T-DMB players.

• Journal of KIISE:Computer Systems and Theory
• /
• v.37 no.3
• /
• pp.184-193
• /
• 2010

This paper proposes a biological iridescence BRDF(Bidirectional Reflectance Distribution Function) compression and rendering method. In the graphics technology, iridescence sometimes is named structure colors. The main features of these symptoms are shown transform of color and brightness by varying viewpoint. Graphics technology to render this is the BRDF technology. The BRDF methods enable realistic representation of varying view direction, but it requires a lot of computing power because of large data. In this paper, we obtain reflection map from iridescence BRDF, analyze color of reflection map and propose representation method by several colorfully concentric circle. The one concentric circle represents beam width of reflection ray by one normal vector. In this paper, we synthesize rough concentric by using several virtually optical normal vectors. And we obtain spectrum information from concentric circles passing through the center point. The proposed method enables IBR(image based rendering) technique which results is realistic illuminance and spectrum distribution by one texture from reduced BRDF data within spectrum.

• Journal of Life Science
• /
• v.31 no.12
• /
• pp.1072-1078
• /
• 2021

The oral pathogen Streptococcus mutans is considered a major causative agent of dental caries in humans. The use of dental hygiene products, including toothpaste and mouthwash, is used for caries control. However, food intake can lead to the recurrence of oral microorganisms. This study aimed to explore why this bacterium dies so quickly during prolonged incubation and to assess whether this growth characteristic is closely associated with the secretion of metabolic products. Notably, the number of live S. mutans cells rapidly declined after 24 hr during the entire period tested, whereas the number of Escherichia coli cells, an indicator strain, remained steady over the same period. To test whether the S. mutans supernatants contained possible signals that accelerated the death of neighbor cells, we obtained the individual supernatants at the above time points. Following pH neutralization, the cells in which the supernatant was supplemented with glucose grew well. However, pH adjustment alone could not fully recover cell growth in conditions in which the supernatant was supplemented, with or without glucose. These phenotypes of S. mutans may be associated with signaling, not only resulting from nutrient depletion. The findings on the survival phenotype of S. mutans provide new insights into cell-cell communication in the biology of this bacterium.

• Clean Technology
• /
• v.19 no.2
• /
• pp.134-139
• /
• 2013

VOCs such as formaldehyde and benzene in a control chamber were adsorbed onto gypsum incorporating oyster shell powder, which was solidified and dried. VOC was first exposed in air and then gypsum mortar was placed in the chamber for 180 min for adsorption. The mortar was prepared with 0, 10, 30, and 50% of oyster shell powder. Two initial concentrations of VOCs including formaldehyde were $27.7{\sim}28.5mg/m^3$ or $175{\sim}150{\mu}g/m^3$. We found out that the initial concentrations did not seem to make any difference in adsorption performance but higher oyster content strongly led to higher adsorption. We used a convection-diffusion-adsorption model to compare the experiment. The model which considers diffusion coefficients of adsorbates and affinity of the adsorbents well represented the experimental data with a fair agreement.