• Journal of Broadcast Engineering
• /
• v.11 no.2 s.31
• /
• pp.174-180
• /
• 2006

H.264/MPEG-4 AVC is jointly developed by ITU-T and ISO/IEC. It provides efficient coding efficiency compared with previous video standards. It reduced the bit rate by approximately $30%{\sim}70%$ while providing the same or better image quality. And, H.264/MPEG-4 AVC supports not only lossy coding but also lossless coding. In this paper, we suggest a method to improve lossless coding efficiency. Proposed method is based on Intra residual DPCM, it has same effect with the prediction from spatially nearest pixel. Also, proposed method does not broken decoder pipe-line. Experimental results, the method reduced the bit rate by approximately 12% in comparison with the H.264 Intra lossless coding. As a result, it is adopted into the H.264/MPEG-4 AVC Advanced 4:4:4 profile.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.4 s.316
• /
• pp.51-59
• /
• 2007

In this paper, we propose an efficient hardware architecture for H.264/AVC CAVLC (Context-based Adaptive Variable Length Coding) decoding which used for baseline profile and extended profile. Previous CAVLC architectures are consisted of five step block and each block gets effective bits from Controller block and Accumulator. If large number of non-zero coefficients exist, process for getting effective bits has to iterates many times. In order to reduce this unnecessary process, we propose two techniques, which combine five steps into four steps and reduce process to get efficiency bit by skipping addition step. By adopting these two techniques, the required processing time was reduced about 26% compared with previous architectures. It was designed in a hardware description language and total logic gate count was 16.83k using 0.18um standard cell library.

• Journal of Korea Spatial Information System Society
• /
• v.2 no.1 s.3
• /
• pp.91-107
• /
• 2000

Geographic Information Systems(GISs) generally use a very large amount of spatial data. and are implemented on various software and hardware system. If it is impossible to exchange the spatial data efficiently among the different hardware, software, and operation systems, data sharing will be very difficult and duplicated storage & management of the spatial data will result in a great economic loss. To solve such problems, a national organization established a national standard for GIS and constructed spatial databases at the national level. In Korea, SDTS(Spatial Data Transfer Standard) is selected as a national standard for the common data transfer format. In this paper, we design and implement a SDTS Data Management System which can support display, insertion, update, deletion of SDTS data, extraction and creation of a specified area, error checking and reporting, setting and verification of a SDTS profile through the GUI (Graphic User Interface) environment. Hereafter, as GIS industry is continually activated and a demand for the SDTS data increases, a requirement for analysis and trust of the SDTS data will grow bigger, so the necessity of the SDTS Data Management System developed in this paper will also grow rapidly.

• Journal of the Korea Convergence Society
• /
• v.9 no.10
• /
• pp.21-28
• /
• 2018

To help users who are experiencing difficulties finding the right learning course corresponding to their level of proficiency, we developed a recommendation model for personalized learning course for Intelligence Tutoring System(ITS). The Personalized Learning Course Recommendation model for ITS analyzes the learner profile and extracts the keyword by calculating the weight of each word. The similarity of vector between extracted words is measured through the cosine similarity method. Finally, the three courses of top similarity are recommended for learners. To analyze the effects of the recommendation model, we applied the recommendation model to the Women's ability development center. And mean, standard deviation, skewness, and kurtosis values of question items were calculated through the satisfaction survey. The results of the experiment showed high satisfaction levels in accuracy, novelty, self-reference and usefulness, which proved the effectiveness of the recommendation model. This study is meaningful in the sense that it suggested a learner-centered recommendation system based on machine learning, which has not been researched enough both in domestic, foreign domains.

• Smart Media Journal
• /
• v.3 no.4
• /
• pp.16-21
• /
• 2014

HEVC is the latest joint video coding standard with ITU-T SG16 WP and ISO/IEC JTC1/SC29/WG11. Its coding efficiency is about two times compared to H.264 high profile. Intra prediction has 35 directional modes including dc and planer. However an accurate mode decision on lots of modes with SSE is too costly to implement it with hardware. The key idea of this paper is a DCT shared architecture to reduce the complexity of HEVC intra encoder. It is to use same DCT block to quantize as well as to calculate SSE in RDO. The proposed intra encoder uses two step mode decision to lighten complexity with simplified RDO blocks and shares the transform resources. Its BD-rate increase is negligible at 20% on hardware aspect and the operating clock frequency is 300MHz@60fps on FHD ($1920{\times}1080$) image.

• Journal of KIISE:Software and Applications
• /
• v.33 no.2
• /
• pp.167-185
• /
• 2006

Software architecture, which is the high level model of a software system, should be specified with ADLs (Architecture Description Languages) for its clarity and preciseness. Most of ADLs such as ACME, however, have not come into extensive use in industries since ADL users should learn a distinct notation specific to architecture. On the other hand, UML is a do facto standard general modeling language for software developments. UML provides a consistent notation and various supporting tools during the whole software development cycle. UML, being a general modeling language, does not provide all concepts that are important to architecture description. UML should be extended in order to precisely model architecture. A number of researches on architecture modeling based on WML have been progressed. Ail of them, however, are based on the UML1.x. UML2.0 embraces much more concepts that are important to architecture modeling than UML1.x. In this paper. we defined an architecture modeling language based on UML2.0. We defined Generic ADL by extending UML2.0 and applied the defined Generic ADL to a restaurant reservation system.

• Spatial Information Research
• /
• v.12 no.4 s.31
• /
• pp.307-319
• /
• 2004

Managing GML data in traditional database systems is not efficient since It has not only characteristics of spatial data but also features of (semi) structured n documents. XML enabled database systems can manage U data efficiently, however they cannot handle spatial data. Spatial database systems are good at spatial data handling but those are inefficient for XML data. This paper proposes a storage method of GML data for spatial database systems in order to solve the problems. The proposed method generates spatial database schemas from GML application schemas and store GML data into SDBMS through the generated schemas. A prototype of the storage method has been implemented on the Postgre SQ/SPE system to show the proposed method is appropriate for storing GML data. As a result, the implemented system was able to store various GML data which had diverse XML structures and different size. Stored data size was smaller than GML files. Furthermore, spatial, non-spatial, and mixed content queries could be performed over the stored GML data as quickly.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.5
• /
• pp.959-970
• /
• 1994

In this thesis, a printed score is read by using handy scanner and the recognition process is excuted in parallel, finally, on Mesh-Connected Computer. What is read is classified into certain patterns and is recognized, based on knowledge. The preprocessing steps are minimized and simple operations are used in the algorithm proposed in this thesis. The score symbols on a printed score can be recognized irrespective of their sizes but their diversity males it difficult to recognize them all, so it is programmed so as to recognize some symbols that is used necessarily and frequently. The recognized result is transformed into the MIDI standard file format. It is required to use a parallel processing system with multiprocessors because the high speed image processing is required. A digitized two-dimensional image is appropriate in processing on the SIMD Mesh-Connected Computer(MCC). Therefore, we explain this architecture and present parallel algorithm using SIMD MCC with n processors that achieves time complexity0(n).

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.9
• /
• pp.47-54
• /
• 2004

The previous works for WLAN system based on OFDM is mainly individual study for independent frequency offset or symbol synchronization. In this paper, the performance of IEEE 802.11a WLAN(Wireless Local Area Network) system in the realistic indoor multipath channel models is analyzed with frequency offset compensation and channel estimation methods. For the performance analysis of the WLAN system indoor Rayleigh multipath channels are adopted, and the BER(Bit Error Rate) of WLAN system is calculated with y2 code-rate 16-QAM based on standard specification. From the simulation results, the difference of required Eb/No for BER of 10-3 is 1-2dB between the channel estimation and frequency offset compensation, and perfect channel estimation and no frequency offset.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1467-1473
• /
• 2013

In construction project, it is important to exchange and share the digital information generated by their own professional softwares. So this paper analyzed the information delivery requirements of steel structure according the structural design stages using IDM methodology. For schematic design stage and detailed design stage, the structural design information to share in each design stages is abstracted by defining the PM, ER, and FP. The new ERs and FPs are proposed by defining the new property sets(Psets), suchlike bolt gauge line, weld, scallop, and cope, to complement the structural design information of $IFC2{\times}3$. Finally, the reasonability of the proposed new ERs, FPs are verified by applying them to represent the standard steel connection sample in detailed design stage. As a result, the structural design information of standard steel connection could be stored and managed sufficiently by using the proposed new ERs and FPs.