• 월간 기계설비
• /
• s.299
• /
• pp.87-93
• /
• 2015

건설공사의 공사비를 산출하기 위해서는 공사에 필요한 노무 자재 및 장비의 정확한 투입량을 알아야 한다. 이를 위해 정부는 1970년부터 표준품셈을 제정하여 현재까지 공공기관에서 시행하는 건설공사의 예정가격 산출에 활용하고 있다. 표준품셈은 한국건설기술연구원에서 제 개정 희망항목 조사와 현장실사, 심의위원회를 거쳐 국토부에서 매년 상 하반기에 제 개정 내용을 공포하고 있다. 이번 호에는 회원사들이 궁금해 하는 표준품셈 제 개정과정에 대해 알아본다. 매년 개정된 기계설비 표준품셈은 대한기계설비건설협회에서 인쇄하여 회원사에게 배포하고 있으며, 협회 홈페이지(ww.kmcca.or.kr${\rightarrow}$자료실${\rightarrow}$각종기준표${\rightarrow}$표준품셈/일위대가표)에서 다운받을 수 있다.

• 월간 기계설비
• /
• no.2 s.199
• /
• pp.56-65
• /
• 2007

표준품셈 487개 항목이 제·개정됨에 따라 건설공사의 예정 가격이 전반적으로 하락할 전망이다. 특히 올해 새로 도입될 표준품셈 상시관리시스템이 작동하면 내년 표준품셈 개편폭은 더욱 확대된다. 건설교통부는 지난 1월 4일 기계설비 등 5개 공종에 걸친 487개 표준품셈 항목을 신설·개정했다고 밝혔다. 이번 개편의 특징은 기존 기관별 요구사항을 단순 반영하는 것이 아니라 건교부가 직접 목표량을 설정해 직접 발굴했고 기계설비, 토목터널 부문이 집중 개선된 점이다. 기계설비 부문의 경우 밸브 및 콕류, 신축이음쇠, 잡철물, 방열기, 위생기구, 소화전 등의 항목이 대폭 개정됐다. 이번 개편에 이어 전체 표준품셈 2,460개 항목 가운데 503개 항목이 추가로 조정돼 내년 초 공표된다. 특히 표준품셈 상시관리시스템이 올해 상반기 가동되면 내년 초 공표될 항목은 이보다 더욱 늘어날 전망이다. 정부의 시스템 운용방침이 당초 계획된 2개년 목표치(990개 항목) 외에 추가 항목을 발굴하는 것이기 때문이다.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.3
• /
• pp.154-158
• /
• 2011

This research was carried out to compare the standard of estimated unit power and material in landscape architecture construction between Korea and Japan. It has also been done to offer a practical and reasonable information to Korea landscape architecture industry. The research results are as follows. First, both Korea and Japan's standard of estimated unit power and material in landscape architecture construction are part of civil construction. Second, Korea's detailed type of construction is centered on plant's type and size while Japan's centered on architectural construction. Third, Korea's standard of estimated unit power and material are composed of workforce construction, mechanical construction and addition of soil. On the other hand, Japan's estimated unit power and material are composed of workforce construction, time of transportation, date of transportation. Fourth, the planting specification of Korea seems to be more in detail than that of Japan, Japan's showing a wider implication. Fifth, when comparing the information regarding standard of estimated unit power and material between Japan and Korea, transportation, independent stalking for plant, soil for landscape architecture is difference between the two countries. On the base of this research results, Korea's standard of estimated unit power and material in planning construction should be more elastic in its implication and independent standard of estimated unit power and material in landscape architecture construction. Also, examination of transportation, independent skating for plant and soil for landscape architecture should be done in order for better improvements.

• Journal of Convergence for Information Technology
• /
• v.10 no.2
• /
• pp.1-8
• /
• 2020

The standardized procurement of supervisory cost for the construction of domestic Information and Communication Technology(ICT) facilities, which is announced by the Korea Engineering and Construction Association in May 2009, has been applied in the public institutions and private industries. However, the previous standardized procurement is not widely applied in recent years because the ICT and social economic environment have been rapidly changed and the previous equations to calculate the supervisory cost is not simplified. As results, the needs for a new standardized procurement has been increased and the Ministry of Industry, Commerce and Energy has published a notice with new standard procurement. In this paper, we provide the explanation of the background and the derivation process of the notice based on authors' experiences of project participation. As research method, we compare the previous mad-day cost of ICT construction and that of another area including electric facility construction, and then we explain a new procurement equation based on WBS(Work Breakdown Structure).

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.1
• /
• pp.131-138
• /
• 2009

This research was carried out to keep a sharp look-out on changes of estimated unit power and material in landscape architectural construction in Korea from 1962 to 2007 and to suggest basic information for its desirable direction in the near future. The research results are as follows. At first, work classification of estimated unit power and material landscape architectural construction was included under the earth work and in 1974 it had the name which was called landscape architectural process with earth works, and in 1984 the estimated unit power and material of landscape architectural construction was separated from the earth work but it was still under name of estimated unit manpower and material of the engineering construction. In 1972 the estimated unit power and material began with a 'planting' and a 'pruning' and still consists of 7 work classification total: 'sodding and herbaceous sowing', 'digging out', 'planting', 'digging round the root', 'keeping and management', 'rubble masonry' and 'planting for protection of rocks split section'. The processes consist of 29 sub-processes in total. The lawn construction was mainly established in the 1960s, the planting construction in the 1970s, the keeping and management in the 1980s, split section protection in the 1990s along with new technology with keeping management in the 2000s. On the basis of these research results, the process to be added in the near future could be related to new material and new technology and the process might be much more subdivided.

• 월간 기계설비
• /
• no.1 s.186
• /
• pp.54-55
• /
• 2006

한국건설기술연구원은 지난 해 12월 30일 2006년 1월 1일부터 적용되는 46개 항목의 건설공사 표준품셈을 관계기관 실무자로 구성된‘품셈 위원회’의 심의를 거쳐 최종 확정, 공표했다. 건기연은 신기술의 적용성을 높이기 위해 실제 사용되는 공법을 중심으로 기계설비부문에서는 발열선등 5개의 품셈이 신설되었고, 기존 품셈의 조문정리 등 체계보완이나 적정성 조정을 위해 재료 할증률등 4개 항목을 보완했다. 기계설비부문의 발열선 품은 배관 동파방지를 이해 가구내 급수 급탕 계량기 주위, 가스보일러 하부배관 및 옥외지하주차장 배관 등에 발열선을 설치하고 있으나 적정품이 없어 전기표준품셈의 Heat Tracing System을 준용하고 있어 가구내와 공용부위로 구분해 신설한 품이다. 건기연은 품셈개정을 위해 지난해 3월 각 발주기관과 관련단체의 의견을 수렴해 대상항목을 선정한 데 이어 지난해 10월까지 건설현장에 대한 실사를 통해 수집한 자료를 토대로 품셈을 신설∙보완했다고 밝혔다.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.481-486
• /
• 2008

Standard Estimating System, which can be used for estimating a construction cost, has been pointed out having some problems such as non-reflecting a variety of construction environments and site conditions, non-adapting new technologies and methods since it was established in 1970. For solving these problems, the Korean Institute of Construction Technology(KICT) has chosen organizations for amending Standard Estimating System. However they have had many mistakes in the process of amending works because of non-establishing amending process and absence of the depreciation measurement method. This research derived the necessity to improve the amending process of the Standard Estimating System, and presented the detailed amending process and the performing method in the each process. Furthermore, this research proposed the depreciation measurement method available for the construction industry by means of analyzing researches that performed in the manufacturing industry and the measurement method for depreciation of general accounts.

• Construction Engineering and Management
• /
• v.21 no.4
• /
• pp.44-48
• /
• 2020

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.85-94
• /
• 2009

In cost estimation of construction, several methods including quantity-per-unit costing, job costing, unit cost estimation and lumpsum estimation are being utilized in Korea. Among them, a Quantity-per-unit Costing Method is used as a standard of cost estimation in public and private works. This paper presents the realistic job-costing method on all road construction tasks through statistical analyses with field survey data to solve the problems induced by the existing quantity-per-unit costing method. Furthermore, it was found that the newly developed job costing method is able to produce a simple costing procedure and a more actual construction cost estimation by a case study, which was performed to compare particular construction costs produced by two different methods, existing quantity-per-unit costing and newly developed job costing. These methods is compared by Case-study about sub-base. In the case of Job costing method, the estimate is shorter than the other case about 50% and can make up for the weak point about instrument in the current Standard of cost estimation. And it can be depict by Job Costing method about progress of work for using by a plan about construction management.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.1
• /
• pp.66-75
• /
• 2016

As the demands for traditional Korean housing has been increased in recent years, modernized Korean traditional housing (Hanok) was developed as a way of providing Hanok for the public. Modernized Hanok attempts to remedy the shortcomings of the traditional hanok (i.e., high unit cost of building and low energy performance). In the previous researches, standardization and productivity improvement for modernized Hanok dissemination have been intensely developed. Above all, cost estimating for modernized Hanok is also an important factor. In an effort to provide effective system for Hanok construction, this paper developed 'standard cost data' for modernized Hanok. Distinct characteristic of modernized Hanok construction were analyzed first. Then, basic structure was identified, and major items were selected for Hanok standard cost data. However, this set of cost data was developed based on two mock-up Hanok projects actually constructed. Accordingly, this standard cost data will be further updated and modified by continuously accumulating real-world Hanok projects