• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.4
• /
• pp.342-354
• /
• 2008

Some statistical characteristics of deepwater waves along the Korean coast have been investigated using various sources of wave measurement and hindcasting data. For very large waves comparable to design waves, it is recommended to use the average value of the empirical formulas proposed by Shore Protection Manual in 1977 and by Goda in 2003 for the relation between significant wave height and period. The standard deviation of significant wave periods non-dimensionalized with respect to the mean value for a certain significant wave height varies between 0.04 and 0.21 with a typical value of 0.1 depending upon different regions and different ranges of significant wave heights. The mean and standard deviation of the principal deepwater wave direction are presented at the 106 coastal grid points along the Korean coast. For relatively large waves, the probability density function of the directional spreading parameter $s_{max}$ is expressed as a lognormal distribution. The most suitable frequency spectrum in the Korean coast is the TMA spectrum. The probability density function of the peak enhancement factor $\gamma$ is also expressed as a lognormal distribution, with its mean value of 2.94, which is close to the value in the North Sea.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.2
• /
• pp.117-127
• /
• 2008

The characteristics of phosphate adsorption-desorption on kaolinite was studied by batch adsorption experiments and detailed adsorbed state of phosphate on kaolinite surface was investigated using ATR-FTIR (Attenuated Total Reflectance-Fourier Transform Infrared) spectroscopy. The phosphorous contents were measured using UV-VIS-IR spectrophotometer with 820 nm wavelength. The adsorbed P was generally increased with increasing pH value in the range of pH 4 to pH 9, however it is not distinct. Moreover the adsorbed P was significantly changed with different initial phosphate concentration. The adsorption isotherms were well fitted with the Langmuir equation, Temkin equation, and Freundlich equation in descending order. The maximum Langmuir adsorption capacity of kaolinite KGa-2 is 232.5 ($204.1{\sim}256.5$) mg/kg and has very higher value than that of kaolinite KGa-1b. Most of adsorbed phosphate on kaolinite were not easily desorbed to aqueous solution, but might fixed on kaolinite surface. However it needs further research about the exact desorption experiment. It was impossible to recognize phosphorous adsorption bands on kaolinite in ATR-FTIR spectrum from kaolinite bands themselves, because the absorption peaks of phosphorous have very similar positions with those of kaolinite, and the intensities of the former were very weak in comparison with those of the latter.

• Analytical Science and Technology
• /
• v.29 no.4
• /
• pp.202-208
• /
• 2016

본 연구에서는 사료 첨가제로 이용되고 있는 유기산 7종(formic acid, malic acid, lactic acid, acetic acid, citric acid, fumaric acid, propionic acid)의 동시분석법 개발을 위한 연구를 실시하였다. 7종의 화합물은 표준물질의 Retention time과 UV spectra를 통해 구별하였고, 분석법 검증은 직선성, 민감성, 선택성, 정확성, 정밀성을 통하여 검증하였다. 그 결과로 LOD와 LOQ의 범위가 각각 43~26,755 μg/kg, 12-8,026 μg/kg으로 설정하였고, 평균 회수율이 79.3~95.2%로 우수하게 보였으며, intra-day, inter-day에 대한 전반적인 상대 표준 편차(%RSD)는 3.2% 미만으로 나타났다. 이와 같이 검증된 자료를 통해 유기산의 동시분석에 대한 직선성, 민감성, 선택성, 정확성 및 정밀성을 확인하였고, 높은 수준을 나타냄을 알 수 있었다. 이를 바탕으로 유기산이 검출되는 단미사료 46 가지를 분석에 적용하여 진행하였고, 정량과 동시분석 검출을 위한 방법은 RP-HPLC/UV 검출기를 이용하여 성공적으로 개발되었다. 따라서 본 연구결과를 바탕으로 하여 사료 중의 유기산의 분석이 신속하고 정확해졌을 뿐 아니라, 다른 종류의 사료 또한 이를 적용하여 효율적으로 이용할 수 있을 것으로 판단된다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.9
• /
• pp.607-616
• /
• 2019

Free body diagram analysis is done for key parts of pilot stage of LLV (Load Limit Valve) which is used to protect overload for static structural test of aerospace flight vehicle. It is shown through the analysis that diameter ratio($D_2)^{ten}/D_2)^{comp}$) of two poppets in a pilot stage must be equal to piston area ratio($A_{comp}/A_{ten}$) of a hydraulic actuator for making a poppet open consistently at constant force applied by an actuator. The result of the analysis is verified by measuring geometries of the poppets in the four different LLVs which are corresponding to four actuators with different capacity and have been used after being imported in this laboratory. Results of "Adjuster resolution tests" with two different pilot stages show the max. deviation of Fi(actuator force in instant of opening poppet) from average Fi obtained for each turn of adjuster is 0.3KN and max. deviation of the Fi normalized by average Fi of each turn of adjuster is 3.7%. From the results, it is verified that the two pilot stages with same poppet diameter ratio make a poppet consistently open at Fis within ${\pm}3.7%$ deviation from the average Fi. The deviation is shown to be caused from frictional force of O-ring in the poppet. Additionally, design factors for poppet spring and adjuster, which are also key parts of the pilot stage, are distinguished and procedure for deciding the factors are also shown in this study.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.3
• /
• pp.203-211
• /
• 2021

Recently, the insulaton design standards for reducing the energy use of buildings have been strengthened. Althoug insulation work is the most cost-effective method for reducing the primary energy consumption per unit area of a building, there are no evaluation criteria for insulation performance at the time of construction and completion inspection. The purpose of this study is to provide objective data by establishing a standard for an analysis method and a method for easily experimenting with the exterior wall thermal transmittance of an apartment house using a thermal transmittance measuring device(TESTO 435). For the exterior wall of the test subject, the specific heat per unit area exceeded 20kJ/(m²·K), and the data at the end point suitable for ISO 9869-1 were analyzed by the average method. The measured values of the thermal transmittance for 3 consecutive days converged within +5% of the desing value, and the standard deviation of the thermal transmittance by day decreased in the order of 1-Day > 3-Day > 2-Day. The standard deviation of the thermal transmittance by time period decreased in the order of 00:00~24:00 < 19:00~07:00 < 00:00~07:00. The measured value of the thermal transmittance for the time perion of 00:00 to 07:00 per day almost coincided with an error of -3% to + 2% compare to the desing value.

• Korean Journal of Optics and Photonics
• /
• v.19 no.6
• /
• pp.416-421
• /
• 2008

A scheme for predicting the concentration of a glucose solution based on its relative optical absorbance at multiple probe wavelengths was proposed and verified. The relative absorbance at each of the probe wavelength was obtained with respect to the absorbance at a reference wavelength. The single reference wavelength (1310 nm) and a group of four different probe wavelengths (1064, 1550, 1685, 1798 nm) were selected to exhibit the glucose absorbance with opposite signs, thereby enhancing the accuracy of the prediction. The final glucose concentration was estimated by taking the average of the predicted values provided by the four probe wavelengths. The absorbance of the glucose solution for the path length of 5 mm was $-1.42{\times}10^{-6}\;AU$/(mg/dL) at the reference wavelength of 1310 nm and peaked at $+8.12{\times}10^{-6}\;AU$/(mg/dL) at 1685 nm. The concentration of the glucose solution was decently predicted by means of the proposed scheme with the standard error of prediction of ${\sim}28\;mg/dL$. In addition, the influence of the ambient temperature and the fat thickness upon the prediction of the glucose concentration was examined. The absorption change with the temperature was $-9.1{\times}10^{-5}\;AU/^{\circ}C$ in the temperature range of $26{\sim}40^{\circ}C$ at the reference wavelength, and $-2.08{\times}10^{-2}\;AU/^{\circ}C$ at 1550 nm. And the absorption change with respect to the fat thickness was +1.093 AU/mm at the probe wavelength of 1685 nm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8116-8127
• /
• 2015

This study provides results from the experiment on the rainfall distribution using a large Experimental rainfall simulator with fixed nozzle arrangement. Results from the experiment on the nozzles which are crucial for rainfall simulation show standard errors expressed as percentage are 0.15~0.38% at the indoor flow testing apparatus and 0.37~0.59% at the KICT-ERS. To examine spraying range of the nozzles, radial and triangular rainfall measurement test are done. In the radial test, coefficient of uniformity (CU) lies in 0.348~0.657 in the single nozzle spraying case, while it increases up to 0.854~0.895 in the seven nozzle spraying case. This means increase of both rain rate and uniformity by means of superimposition of spraying. The CU of the triangular test falls to 0.845~0.896. The results from the experiment on the whole-scale of the KICT-ERS show that CU exceeds 0.7 for every case except the one experimental condition where a $1.5{\phi}$ nozzle is used. The CU tends to increase with increasing rainfall intensity. Comparison with the previous studies shows that KICT-ERS provides rainfall distribution above average CU.

• Korean Journal of Weed Science
• /
• v.17 no.3
• /
• pp.303-309
• /
• 1997

Variation of morphological and physiological traits of 50 Bidens tripartita accessions were studied and the accessions were grouped through cluster analysis based on four major characters; plant type, leaf partition, achene length, days to flowering. Bidens tripartite accessions have shown significant variations in plant type, stem length, days to flowering, leaf shape, leaf partition, chlorophyll content, leaf color, stem color, achene color, achene length and achene shape. Most of Bidens tripartite accessions appeared to have strong dormancy and also photodormancy with some exceptions. Plants could be classified into 5 types from straight(I) to triangle(V), and intermediate diamond type(III) was prevalent. The plant type score has negative correlation with the stem length. None, three, and five part leaved plants were observed and most of them were three or five parted. Leaf partition had negative correlation with achene length and chlorophyll content. Average days to flowering was 108 days in the range of 94~141 days. It had positive correlation with achene length and leaf shape and negative correlation with achene color. Average achene length was 10.0mm and it had positive correlation with achene shape, stem length, days to flowering and leaf shape. It also had negative correlation with leaf color, stem color, achene color, leaf partition. Bidens tripartite accessions could be divided into identifiable six groups from the cluster analysis at the distance 0.06 using Ward's minimum-variance method.

• Journal of the Korea Concrete Institute
• /
• v.14 no.6
• /
• pp.805-812
• /
• 2002

The number of old concrete structure which needs to be strengthened has been increased. The repair and strengthening methods have to be determined based on the current status of the structure. Consequently the estimation method for the damage status of the structure has been desperately needed, but no studies have been tried to use the crack and deflection characteristics to estimate the damage status. In this study, the crack characteristics depending on load level were measured and analysed. The crack characteristics observed from 11 samples were compared with damage status, and load level, The crack characteristics examined in this study include crack number, crack length, crack range, crack interval, maximum crack length, crack area, and average crack length. The deflections were normalized based on yield deflection, and the relationship between the relative deflection and the standardized crack characteristics were compared. Among the crack characteristics, crack interval, crack area, crack range, and maximum crack length, have been showed a close relationship to the relative deflection. Therefore, if such crack characteristics are evaluated, the maximum load applied to the structure is believed to be estimated. if additional parameters such as size of specimen, strength of concrete and steel, and steel ratio are studied, the damage status of structure can be estimated more accurately.

• Journal of Food Hygiene and Safety
• /
• v.18 no.3
• /
• pp.95-100
• /
• 2003

Competitive direct enzyme-linked immunosorbent assay(cdELISA) of aflatoxin $B_1$ ($AFB_1$) in deonjang(Korean-style soybean paste) and kochujang(fermented hot peppersoybean paste) and the level of $AFB_1$ in modern or traditional style deonjang and gochujang, produced in Korea, was surveyed by cdELISA. From the standard curve of the cdELISA, the detection limit of $AFB_1$ was 0.2 ng/m/. The average recovery of $AFB_1$ was 71.5% in the range of 1~100 ng/g after spiking $AFB_1$ into deonjang and it means that it could be possible to detect the $AFB_1$ in these range by the cdELISA in deonjang. Among the 30 kochujangs tested, no $AFB_1$ was detected in kochujangs. Among the 30 deonjangs, $AFB_1$ was detected in 6 ones in the range of 1.0~6.0 ng/g. The occurrence of $AFB_1$ in deonjang and kochujang tested in this study was less than the Korea Standard and Specification of aflatoxin in foods (10 ppb).